Motorola H790 - Headset - Monaural User manual

Quick Start Guide
motorola H790

your headset
1
your headset
Take a moment to familiarize yourself with your new
Motorola H790 Headset.
Earhook
Charging
Port
Volume
Buttons
Call
Button
Power
Switch
Ear
Speaker
Indicator
Light
Micro-
phone

charge it
2
charge it
Charge your headset before using it.
The indicator light is red or yellow while the battery is
charging. When the battery is fully charged, the indicator
light turns green.
Note: Headset is not functional while charging.
Note: Your battery is designed to last the life of your
product. It should only be removed by a recycling facility.
Any attempt to remove or replace your battery will
damage your headset.

pair & connect
3
pair & connect
Once charged, let’s get your headset paired and
connected to your Bluetooth phone(s).
pair & connect first phone
1 Turn off any Bluetooth devices previously paired with
your headset.
2 Turn on the Bluetooth feature on your phone.
3 Put headset on your ear (see “wear it” on page 7 for
help).
4 Turn on your headset (see “turn on” on page 8 for
help).
The indicator light becomes steadily lit in blue and
you hear
“ready to pair” .
5 Follow voice prompts to connect your phone to your
headset.
Note: When prompted for the passkey, enter 0000 .
When your headset successfully pairs with your phone,
you hear
“pairing complete” . When connected, you
hear
“phone 1 connected” and see the indicator light
rapidly flash in blue and purple.

pair & connect
4
pair & connect second phone
(optional)
1 Turn off first phone and any other Bluetooth devices
previously paired with your headset.
2 Turn your headset off (see “turn off” on page 8 for
help).
3 Turn on the Bluetooth feature on your phone.
4 Put headset on your ear.
5 Turn on your headset.
The indicator light becomes steadily lit in blue
and
you hear “ready to pair”.
6 Follow voice prompts to connect your phone to your
headset.
When your headset successfully pairs with your phone,
you hear
“pairing complete” . When connected, you
hear
“phone 1 connected” and see the indicator light
rapidly flash in blue and purple.
To connect to both phones, simply turn on the first phone
while the second phone is connected. When you hear
“phone 2 connected” , your headset is connected to

pair & connect
5
both phones. The last paired phone (your second phone) is
now your primary phone (or “phone 1”) for voice dial
functionality.
test your connection
1 Place the headset on your ear.
2 On one phone, dial the number you want to call and
press
Call/Send key. Repeat for the second phone.
If your phones and headset are successfully connected,
you hear ringing on the headset.
For daily use, make sure your headset is turned on, and
your phone’s Bluetooth feature is on. Your headset and
phone will connect automatically.

put it on
6
put it on
choose an earbud
To get the best headset performance, try out all the
supplied ear cushions to get a good fit.
choose an ear
Your headset comes ready for the right ear. To change for
the left ear:

put it on
7
wear it
Flex the ear hook and loop it over your ear.
Tip: For optimal audio performance and comfort, be sure
to position the ear cushion into your ear canal and point
the headset microphone towards your mouth.

turn on & off
8
turn on & off
turn on
Slide the Power switch to the on position (no red is
shown under the switch)
. The indicator light flashes blue
three times, then flashes in blue and purple (if connected
with a device) or is steadily blue (if ready to be paired).
turn off
Slide the Power switch to the off position (red is shown
under switch). The indicator light flashes three times
then turns off.
Power
Switch
Indicator
Light

battery check
9
batter y check
Press and hold both Volume buttons while not on a call.
To save battery power, turn off the headset when you
don't use it for an extended time.
indicator
light
voice prompt talk time
red “battery level
is low”
less than 1.5 hours
yellow
“battery level
is medium”
between 1.5 to 3.5
hours
green
“battery level
is high”
more than 3.5 hours

calls
10
calls
Tip: When connected to two phones, voice prompts help
manage call functions such as voice dial, redial, and end
call. Follow the voice prompts to execute a function on
the desired phone.
To . . .
answer call Press the Call button.
reject call Press and hold a Volume button until
you hear an audio tone.
make a voice
dial call
Press the Call button and you hear an
audio tone.
redial last call Press and hold the Call button until
you hear an audio tone.
mute or unmute
a call
Press and hold both Volume buttons
until you hear “mute on” or “mute
off”.
end a call Press the Call button.
answer second
incoming call
Press the Call button.
reject second
incoming call
Press and hold a Volume button until
you hear a tone.

calls
11
Note:
Your headset supports both Handsfree and
Headset Profiles. Accessing call functions depends upon
which profile your phone supports. See the instructions
that came with your phone.
Note: Some call features are phone/network dependent.

status indicators
12
status i ndicators
indicator light (with charger
plugged in)
indicator light (with charger not
plugged in)
headset
indicator
headset status
red charging (battery level less than 50%
charge)
yellow charging (battery level more than
50% charge)
green charging complete
headset indicator headset status
off power off
three blue flashes powering on/off
steady blue pairing/connect mode
rapid blue/purple
flashes
connection successful

status indicators
13
Note:
After 1 minute on a call or 20 minutes of inactivity,
the light stops flashing to conserve power, but the
headset remains on.
quick blue flash incoming/outgoing call on
phone 1
quick purple flash incoming/outgoing call on
phone 2
slow blue pulse connected (on a call)
slow blue flash standby (connected to one
phone)
slow green flash standby (connected to two
phones)
slow red flash idle (not connected to a phone)
slow purple pulse connected call muted
steady red attempting to connect
quick red flash low battery
headset indicator headset status

tips & tricks
14
tips & tricks
enable/disable voice prompts
With the headset turned on, press and hold either
Volume button and Call button until you hear “voice
prompts on” or “voice prompts off”.
restore to factory settings
Caution: This action erases all pairing information stored
in your headset.
To restore your headset to original factory settings, with
the headset turned on, press and hold both Volume
buttons and Call button for 10 seconds until the indicator
light is steady blue.

problems?
15
problems?
My headset will not enter pairing mode.
Make sure that any devices previously paired with the
headset are turned off. If the indicator light is flashing in
blue, first turn off the other device, then turn the headset
off and on. The indicator light becomes steadily lit in blue
and you hear “ready to pair”.
My phone doesn't find my headset when searching.
Make sure the indicator light on your headset is steadily lit
in blue when your phone is searching for devices. If not,
press and hold the Call button and both Volume buttons
until you hear “ready to pair” and see the indicator light
steadily lit in blue.
My headset will not pair with my phone.
If the indicator light is not steadily lit in blue when your
phone is searching for your headset, you can reset the
headset by pressing and holding the Call button and both
Volume buttons until the indicator light is steadily lit in
blue. Then follow pair & connect instructions on pages
3  5 .
My headset connected before, but now it's not
working.
Make sure the indicator light on your headset is steadily lit
in blue when your phone is searching for devices. If not,

problems?
16
press and hold the Call and both Volume buttons until you
hear “ready to pair” and see the indicator light steadily lit
in blue.
Support.
If you need more help, contact us at 1877MOTOBLU or
visit us at
www.motorola.com/Bluetoothsupport or
www.motorola.com/bluetoothconnect .

17
Safety & General Information
Safety Information
IMPORTANT INFORMATION ON SAFE AND EFFICIENT OPERATION. READ THIS
INFORMATION BEFORE USING YOUR DEVICE.
Approved Accessories
Use of accessories not approved by Motorola, including but not limited to batteries,
antennas, and convertible covers, may cause your mobile device to exceed RF energy
exposure guidelines and may void your mobile device’s warranty. For a list of approved
Motorola accessories, visit our Web site at:
www.motorola.com
Batteries & Chargers
Your battery, charger, or mobile device may contain symbols, defined as follows:
Use & Safety for Battery-Powered Accessories
• Do not store or use your battery-powered accessory (such as a Bluetooth®
headset or other device) in temperatures below -10°C (14°F) or above 60°C
(140°F).
• Do not recharge your accessory in temperatures below 0°C (32°F) or above 45°C
(113°F).
• Conditions inside a parked car can exceed this range. Do not store your accessory
in a parked car.
• Do not store your accessory in direct sunlight.
• Storing your fully charged accessory in high-temperature conditions may
permanently reduce the life of the internal battery.
• Battery life may temporarily shorten in low-temperature conditions.
Symbol Definition
Important safety information follows.
Do not let your battery, charger, or mobile device get wet.
032374o

18
Caution About High Volume Usage
Warning: Exposure to loud noise from any source for extended periods of time may
temporarily or permanently affect your hearing. The louder the volume sound level, the
less time is required before your hearing could be affected. Hearing damage from loud
noise is sometimes undetectable at first and can have a cumulative effect. To protect your
hearing:
• Start your volume control at a low setting and use as low a volume as possible.
• Limit the amount of time you use headsets or headphones at high volume.
• Where possible, use your headset in a quiet environment with low background
noise.
• Avoid turning up the volume to block out noisy surroundings.
• Turn the volume down if you can’t hear people speaking near you.
If you experience hearing discomfort, including the sensation of pressure or fullness in
your ears, ringing in your ears, or muffled speech, you should stop listening to the device
through your headset or headphones and have your hearing checked by your doctor.
Smart Practices While Driving
Using a mobile device while driving may cause distraction. End a call if you can’t
concentrate on driving. Also, using a mobile device or accessory may be prohibited or
restricted in certain areas. Always obey the laws and regulations on the use of these
products.
Responsible driving practices can be found at
www.motorola.com/callsmart
(in English only).
Industry Canada Notice to Users
Industry Canada Notice
Operation is subject to the following two conditions: (1) This device may not cause
interference and (2) This device must accept any interference, including interference that
may cause undesired operation of the device. See RSS-GEN 7.1.5.