Motorola ELITE FLIP User manual

MOTOROLA
ELITE FLIP
EN

Check it out 1
Check it out
here’s what you can do
Now hear even better! Get clear calls and rich
sound with your MOTOROLA ELITE FLIP. The
ultimate audio experience in HD Audio Plus
sound combines Wideband audio and
CrystalTalk dual-mic noise cancellation
technologies.
Go ahead, check it out:
At a glance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Charge it . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Connect & go. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Basics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Advanced . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Want more?. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Safety, Regulatory & Legal . . . . . . . . . . . . . . . . . . . . 22
Caution: Please read the important safety,
regulatory and legal information at the back of
this guide.

2Check it out
more information
On the web: www.motorola.com/support.

At a glance 3
At a glance
the important bits, quick and easy
Smart Button
Earhook
Micro USB
Charging
Connector
(on side)
Microphone
Volume Button (on side)
Ear
Speaker
Boom
Microphone
Call Button
Status
Light
(on side)

4Charge it
Charge it
let’s get you up and running
While your headset is charging, you won’t be
able to use it.
Note: Your battery is designed to last the life of
your product. It should only be removed by a
recycling facility.Any attempt to remove or
replace your battery will damage your headset.
Note: Fully charge before use.
Status Light
Red/Yellow = charging
Green = fully charged

Connect & go 5
Connect & go
let’s get you connected
There are two methods to pair your headset and
phone—EasyPair and NFC (Near Field
Communication).
When your headset successfully pairs with your
phone, you hear “pairing complete”. When
connected, you hear “phone 1 connected” and
the indicator light rapidly flashes blue and purple.
Easypair method
1Turn off any Bluetooth devices previously
paired with your headset.
2Turn on the Bluetooth feature on your phone.
3Put the headset on your ear (see “Comfort”
on page 10 for help) and turn on (charge
before use) (see “Turn on & off” on page 8 for
help).

6Connect & go
The indicator light becomes steadily lit in blue
and you hear “Welcome to the Motorola Elite
Flip. Ready to pair”.
4Follow the voice prompts to connect your
phone to your headset.
Note: If prompted for the passkey, enter
0000.
NFC method
Using NFC (Near Field Communication), pairing
is as simple as bringing the headset and phone
close to each other.
Note: If your phone does not support NFC, use
the “Easypair method” on page 5.
To pair and connect your headset with your
phone, ensure your phone’s display is on and
touch the top of the headset to your phone’s

Connect & go 7
NFC tag location. Hold the headset to the phone
until NFC pairing completes.
•If your headset is off (boom closed), your
headset turns on, pairs, and then turns off.
•If your headset is on (boom open), it pairs
and connects with your phone.
Note: NFC tag locations vary by phone, see your
phone’s user guide.
new graphic (TBD)

8Basics
Basics
standard features, advanced quality
Turn on & off
To turn your headset on or off, flip the boom to
the open or closed (folded) position.
Note: Voice commands are in English only.
Calls
Note: Some features and phone/network
dependent.
To …
answer a call Press the Call button.
reject a call Press and hold a Volume
button until you hear a tone.
make a voice
dial call
Press the Call button and
you hear a tone.

Basics 9
Note: Using a mobile device or accessory while
driving may cause distraction and may be illegal.
Always obey the laws and drive safely.
redial last call Press and hold the Call
button until you hear a tone.
mute or
unmute a call
Press the Smart button and
you hear “mute on” or
“mute off”.
end a call Press the Call button.
answer
second
incoming call
Press the Call button.
reject second
incoming call
Press and hold a Volume
button until you hear a tone.
To …