Motorola S605 User manual

Quick Start Guide
S605
MOTO
Motorola S605
ROKRTM
/ 快速使用手册

1
Welcome
before you begin
charge it
get started
connect wirelessly
control your tunes
listen to radio
receive a call
while on a call
make a call
check battery
wireless status
cord management
tips & tricks
tech speak
European Union Directives
Conformance Statement
Contents
2
3
4
5
6
9
10
11
12
14
15
16
17
19
21
22

2
welcome
Ultra light weight and elegantly simple, the MOTOROKRTM S605 Bluetooth stereo
headset makes it so easy to go hands-free with music and calls. The headset
empowers you to listen to wireless streaming music or FM radio AND take calls…
all in rich, clear sound.
Note: Before using your device for the first time, be sure to review the important
safety and legal pamphlet and follow instructions. Periodically review this information
so you remember how to safely use your headset.

3
before you begin
Take a moment before you get started to familiarize yourself with the components
of your stereo headset.
Forward
Button
Charger Port
(on bottom)
Play/Pause
Button
Power/Lock
Switch (on
side)
Music Mode
Button
Microphone
Volume Up
Button
Volume Down
Button
Reverse
Button
Status
Indicator Light
3.5mm
Headphone Jack
Call Button

4
The headset’s battery is fully charged when the indicator light turns green.
Disconnect the charger.
Note: During charging, if indicator light is flashing red, the battery is completely
drained and the headset is inoperable. The indicator light must be at least steady red
before it can be powered on again.
Note: Stereo headset is not functional during charging.
Note: This product uses a lithium ion, rechargeable, non-replaceable battery. Under
normal use, the expected life of the rechargeable battery is approximately 400
charges.
charge it
The first time you use the headset, you’ll need to charge the battery for a minimum
of 1 hour using the included charger.
Plug the charger into the charging port on your stereo clip, as shown.
1
2

5
To get started, turn on your stereo headset and plug in your headphones. Slide and
hold the Power switch to position for 1.5 seconds to turn on your headset. The
status indicator light flashes blue three times, and an audio tone is heard.
get started
Your stereo headset comes with 3.5mm headphones. To utilize these or your own
favorite headphones, connect them to the 3.5mm headphone jack.
Power/Lock
Switch
3.5mm Headphone Jack

6
connect wirelessly
To listen to your music via Bluetooth wireless connection, as well as make
and receive handsfree calls, you need to pair (link) your stereo headset with your
Bluetooth phone and/or music device.
Turn off any Bluetooth devices previously paired with your stereo headset.
Turn on the Bluetooth feature on your Bluetooth phone or music player.
Turn on your headset.
The status indicator light is steadily lit in blue to indicate the stereo headset is in
discoverable mode.
Place phone or music device in Bluetooth search mode.
Select Motorola S605 from search results on your phone or music device.
Select OK or Yes to pair your stereo headset with your phone or music device.
If prompted, enter 0000 for passkey.
1
2
3
4
5
6
7

7
When your stereo headset successfully pairs and connects with your phone or
music device, the status indicator light flashes blue and purple. Music playing from
your connected music source can be heard on your headphones.
Once connected, the status indicator light provides current Bluetooth connection
status as shown below.
connect wirelessly
Indicator Light
(Flashing)
Green
Orange
Blue
Wireless Connect Status
both handsfree phone (HFP)
and streaming music (A2DP)
connections are active
only streaming music (A2DP)
connection is active
only handsfree phone (HFP)
connection is active

8
connect wirelessly
Notes:
After successfully pairing your headset and Bluetooth device, you don’t need
to repeat these steps. For each use, ensure that your headset is turned ON
and that your device’s Bluetooth feature is ON.
Some music devices will automatically attempt to play music when S605 re-
connects to it.

9
Playback controls on your stereo headset can be used when listening to wireless
music streaming from a Bluetooth-enabled music device that also provides remote
control capabilities (AVRCP).
control your tunes
* If your music player supports this feature
When remote control capabilities are not supported, music should be controlled from
your music player.
Press --
play/pause
music
Press and hold
-- stop music
Press -- change between wireless music and FM radio
Press -- adjust
Volume up/down
one step
Press and hold --
adjust volume
up/down
continuously
Press -- skip to previous track Press -- skip to next track
Press and hold -- rewind track* Press and hold -- fast-forward track*

10
To listen to FM radio, press the Music Mode button. The status indicator light slowly
flashes in purple.
listen to radio
Press -- change between wireless music and FM radio
Press and hold -- store current station (up to five stations)
Press -- adjust Volume up/down
one step
Press and hold -- adjust volume
up/down continuously
Press -- scan frequency up
Press and hold -- skip back to
next stored station
Press --scan frequency down
Press and hold -- skip forward to
previous stored station

11
To make and receive calls using the stereo headset, a Bluetooth handsfree (HFP)
connection must be established with your phone (see “connect wirelessly” on page
6 for details).
When there’s an incoming call, the status indicator light flashes quickly in blue on
your stereo clip and you hear a ring tone. If music is playing when a call is received,
the music either automatically pauses or mutes depending on your music player and
connection setup. If FM radio is playing when call is received, radio audio is muted.
receive a call
Press -- answer
incoming call
Press and hold(either
button, but not both)
-- reject call

12
When a call is active, the status indicator light slowly pulses in blue on your stereo
headset.
while on a call
Press -- adjust Volume
up/down one step
Press and hold --
adjust volume up/down
continuously
Press -- mute call
(status indicator
flashes in purple when
mute)
Press -- end call

13
When there’s a second incoming call, the status indicator light flashes quickly in blue
on your stereo headset and you hear ringing.
while on a call
Press --
1) answer second call (first call is
placed on hold),
2) end second call (first call
resumes), or
3) resume first call on hold (when
second caller hangs up)
Press and hold(either
button) -- reject second
incoming call *
* If your phone supports this feature

14
Using the stereo headset to make a call, you can redial the last dialed number or
make a voice dial call (if your phone supports this feature). When making a voice dial
call, the microphone on the stereo headset is enabled and you hear a prompt from
your phone.
make a call
Press -- make a voice dial
call (you hear a prompt
from your phone)
Press and hold -- redial
last number
Press -- adjust volume up/down
one step
Press and hold -- adjust volume
up/down continuously

15
To check your stereo headset’s remaining battery level, press and hold both
Volume buttons until you hear a tone. The status indicator light displays approximate
remaining talk time and music play time.
check battery
Indicator
Light
Green
Orange
Red
Available Talk Time
Up to 5.5 hours
45 minutes to 4.5 hours
Less than 45 minutes
When your stereo headset is in a low battery level state, the status indicator light
flashes quickly in red and an audio tone is repeated every minute.
Available Music Play
Time
Up to 5.5 hours
30 minutes to 4.5 hours
Less than 30 minutes

16
Wireless Status
Bluetooth discoverable mode
standby (handsfree connection only)
standby (streaming music connection only)
standby (both handsfree and streaming
music connection)
incoming/outgoing call
connected on a call
connected call muted / FM radio on (when
not on a call)
started music player
idle (not connected to device)
The status indicator light on your stereo headset displays current status of Bluetooth
wireless connection(s) to your phone and/or music device.
wireless status
Indicator Light
steady blue
long blue flash
long orange flash
long green flash
quick blue flash
long blue pulse
long purple pulse
three orange flashes
slow red pulse

17
While using your stereo headset, notches are provided to hang your headphones
without needing to wind the cord, as shown.
cord management
1
2

18
You can also wind the cord around your headset and use the notches to hang your
headphones when storing, as shown.
cord management
1
2

19
tips & tricks
multi-point (two device) connection
To connect to a phone and music device at the same time:
Pair and connect to your phone (see page 6).
Turn off both your phone and your stereo headset.
Turn your stereo headset back on.
The Bluetooth indicator flashes to indicate the stereo headset is in discoverable
mode.
Turn on your music device. Make sure the Bluetooth feature is turned on in the
device.
The music device searches for your stereo clip.
Complete steps 5 through 7 on page 6 to pair and connect your music device
and headset successfully.
Turn off your headset.
Turn your phone back on and make sure the Bluetooth feature is turned on in
both the phone and music device.
Turn your headset back on. It should now connect to both devices.
1
2
3
4
5
6
7
8