Motorola H780 - Headset - Over-the-ear User manual

Quick Start Guide
Motorola H780
/ 快速使用手册

1
BEFORE YOU BEGIN
1CHARGE Your Headset's Battery
2START BLUETOOTH FEATURE Your Phone
3PAIR Your Headset and Phone
4TEST AND USE
USING A SECOND PHONE?
TIPS FOR USING H780 WITH TWO PHONES
TURNING H780 ON AND OFF
EAR CUSHIONS AND YOUR HEADSET
WEARING THE HEADSET
CHANGING FOR USE ON OTHER EAR
QUICK BATTERY CHECK
NOISE CANCELLATION BUTTON
MAKING CALLS
AUDIO TONES
INDICATOR LIGHT
TROUBLESHOOTING
European Union Directives Conformance Statement
Contents
2
3
4
5
7
8
10
11
12
13
14
15
16
17
19
20
23
26

2
BEFORE YOU BEGIN
Before using this product, read the Important Safety and Legal Information pamphlet and
follow its instructions.
Take a moment before you get started to familiarize yourself with your new
H780 Headset.
Ear
Speaker
Call
Button
Microphone
Volume
Buttons
Power
Switch
Noise
Cancellation
Button
Indicator Light/
Microphone
(on side)

3
Plug the Motorola charger into the end of the headset.
The indicator light turns red when the battery is charging. It may take up to
1 minute for the indicator light to turn on. When the headset’s battery is fully
charged (about 2 hours), the indicator light turns green.
Disconnect the charger.
1 CHARGE Your Headset’s Battery
1
2
Charge your headset’s battery for 2 hours:
Note: Headset is not functional while charging.
Note: This product uses a lithium ion, rechargeable, non-replaceable battery. Under normal
use, the expected life of the rechargeable battery is approximately 400 charges.

4
Press (Menu) > Settings > Connection > Bluetooth Link > Setup.
Scroll to Power.
Select Change.
Scroll to On.
Press Select to turn on the Bluetooth feature. The Bluetooth feature remains
on until you turn it off.
Note: These steps are for most Motorola phones. For other phones, see your phone’s
user’s guide.
2 START BLUETOOTH FEATURE Your Phone
Your phone’s Bluetooth feature is off by default. To use your headset, you must
turn on the Bluetooth feature in your phone.
For most Motorola phones (from home screen):
1
2
3
4
5

5
3 PAIR Your Headset and Phone
Before you can use your headset, you must pair (link) it with your phone.
Step A - ENSURE HEADSET IS IN PAIRING MODE
Power on the headset by sliding Power switch to the On position. The indicator
light first flashes during power up, then initiates pairing. After a few moments,
the indicator light will be steadily lit in blue to indicate headset is in pairing mode.
Indicator Light
(steady blue for
pairing)
If the headset does not enter pairing mode, see TROUBLESHOOTING for help.

6
On your Motorola phone, press (Menu) > Settings > Connection > Bluetooth
Link > Handsfree > Look for Devices.
The phone lists Bluetooth devices it finds.
Select Motorola H780.
Select OK or Yes to pair your headset with your phone.
Enter the passkey: 0000
Select OK.
When your headset successfully pairs with your phone, the indicator light
flashes purple and blue.
Note: These steps are for most Motorola phones. For other phones, see your phone’s
user’s guide.
3 PAIR CONTINUED Your Phone and Headset
Step B - SET YOUR PHONE TO LOOK FOR YOUR HEADSET
For most Motorola phones:
1
2
3
4
5

7
Place the headset over your ear.
On the phone, dial the number you want to call and press SEND key on your
phone.
If your phone and headset are successfully paired, you will hear ringing on
the headset.
4 TEST AND USE
Your phone and headset are now paired and ready to make and receive calls. To
confirm they are operating properly, make a call:
1
2
3
After you have successfully paired your phone and headset, you don’t need to
repeat these steps. For daily use, ensure that your headset is turned ON and that
your phone’s Bluetooth feature is ON.

8
Turn off any phones or devices that are already paired with your headset.
Turn off your headset by turning off the Power switch.
Perform Step 2 (“Start Bluetooth Feature”), and Step 3 (”Pair”), and Step 4
(”Test and Use”) to pair your headset with your second phone.
USING A SECOND PHONE?
Multipoint technology allows you to make and receive calls from two Bluetooth
enabled devices like your personal and business phones.
To pair a second phone to your headset, follow these steps:
1
2
3
To reconnect your headset with your first phone (and thus be connected to both
phones), follow these steps:
Turn on first phone.
1

9
On your Motorola phone, press (Menu) > Settings > Connection >
Bluetooth Link > Audio Devices.
The phone lists Bluetooth devices it finds.
Select Motorola H780.
Select OK or Yes.
a
b
c
Your headset is now connected to both phones. The last paired phone (your
second phone) is now your primary phone for voice dial functionality.
After you have successfully paired both phones with your headset, you don’t
need to repeat these steps. For daily use, ensure that your headset is turned ON
and that your phone’s Bluetooth feature is ON.
Use your first phone to connect to your headset.
2

10
TIPS FOR USING H780 WITH TWO PHONES
Use the following tips when using H780’s multipoint technology:
Incoming calls can be answered from both phones:
– When answering a call, the idle phone is disconnected from the
headset.
– When the call ends, the idle phone is automatically reconnected to
the headset.
Last number redial dials the last outgoing call made from the primary phone.
Voice dial is accessible from your primary device (last paired phone) by
tapping the Call button and speaking the name after the tone.
If your headset does not automatically reconnect to both phones, turn the
H780 off and on again to reconnect.

11
TURNING H780 ON AND OFF
To turn ON your H780, slide the Power switch towards the indicator light. The
indicator light first flashes blue for several seconds, then :
flashes blue (if paired and connected with another device)
becomes steadily blue (if ready to be paired).
To turn OFF your H780, slide the switch toward the charging plug (the orange
color under the switch is displayed). The indicator light will turn off.
Power
Switch
Indicator
Light

12
EAR CUSHIONS AND YOUR HEADSET
Your H780 headset is supplied with multiple ear cushions. Your headset’s
performance is greatly dependent upon achieving a good fit on your ear.
Therefore, we recommend trying all the supplied ear cushions with your headset.
The ear cushion is fitted onto the end of your headset’s earpiece speaker like
shown, and placed onto your ear when using your headset.

13
WEARING THE HEADSET
To wear your headset, flex the earhook and loop it over your ear as shown.
Be sure to position the ear cushion into your ear canal for optimal audio
performance and comfort.

14
CHANGING FOR USE ON OTHER EAR
You can wear your H780 headset on your left or right ear. The headset comes
ready for the right ear. To change the headset for the left ear:
1 Gently lift and pull the top of the earhook up
and off speaker stem, as shown.
2 Flip the headset over.
3 Attach the earhook to the speaker stem,
as shown.

15
QUICK BATTERY CHECK
While turned on and not on a call, you can check your headset’s battery charge
level by pressing and holding both Volume buttons.
Note: This feature does not work when headset is in pairing mode.
The indicator light displays charge status until you release the buttons.
Headset Indicator Available Talk Time
Red Less than 2 hours
Yellow 2 to 4.5 hours
Green Greater than 4.5 hours

16
NOISE CANCELLATION BUTTON
Your H780 headset has a noise cancellation button that enables you to hear the
difference of dual-microphone noise cancellation.
Noise cancellation is always on each time a new call is received or placed. To
turn the feature off (or back on), tap the Noise Cancellation button while in a call.
Noise
Cancellation
Button

17
MAKING CALLS
Function Action
Make a voice dial call Tap the Call button and speak
(Primary phone) the name after the tone
End a call Tap the Call button, and hear a
high-to-low tone
Answer a call Tap the Call button, hear the
ring tone, then a low-to-high
tone
Reject a call Press and hold either Volume
button until you hear a tone
Note: Some features are phone/network dependent.

18
Note: Your H780 supports both Handsfree and Headset Profiles. Accessing call functions
depends upon which profile your phone supports. See your phone’s user’s guide for more
information.
Function Action
Redial last call Press and hold the Call button
until you hear a tone
Answer a second Press and hold the Call button
incoming call (places first call on hold), and
hear a tone
Reject second Press and hold either Volume
incoming call button until you hear a tone
Transfer a call from the Slide the power button to the
headset to the phone OFF position
Mute or unmute a call Tap both Volume buttons until
you hear a mute tone
MAKING CALLS CONTINUED

19
Audio Tone Headset Status
Ring tone Incoming call
Short tone Phone network not available
High to low tone End call
Two short tones when Volume at minimum
pressing Volume button or maximum
during a call
Ascending tone Mute enabled
Low tone Mute reminder
(repeated every15 seconds)
Descending tone Mute disabled
Low to high tone Connection
confirmation/voice activation
No audio indications; Out of range
deteriorating quality
Two tones Low battery
repeated every minute
AUDIO TONES