Motorola MOTOSTART HS815 Instruction Manual

DRAFT
HS815
Wireless Headset
with Bluetooth®
Technology
START HERE >

DRAFT

DRAFT
1
Quick Start
To use your headset, you need to:
1 Charge the headset (see page 15).
2 Turn on Bluetooth in your phone
(refer to your phone's users manual).
3 Turn on your headset (press the
Multifunction button until the LED
flashes rapidly).
4 Pair your headset with your phone
(see page 19).

DRAFT
2
Export Law Assurances
This product is controlled under the export
regulations of the United States of America and
Canada. The Governments of the United States
of America and Canada may restrict the
exportation or re-exportation of this product to
certain destinations. For further information
contact the U.S. Department of Commerce or
the Canadian Department of Foreign Affairs and
International Trade.
The use of wireless devices and their
accessories may be prohibited or restricted in
certain areas. Always obey the laws and
regulations on the use of these products.
MOTOROLA and the Stylized M Logo are
registered in the US Patent & Trademark Office.
The Bluetooth trademarks are owned by their
proprietor and used by Motorola, Inc. under
license.
All other product or service names are the
property of their respective owners.
© Motorola, Inc., 2004.
6809490A90-O

DRAFT
3
Contents
Introduction . . . . . . . . . . . . . . . . . . . 11
What Is Bluetooth® Wireless
Technology?. . . . . . . . . . . . . . . . . . 11
How Can I Use My Wireless
Headset? . . . . . . . . . . . . . . . . . . . . 12
Headset Features . . . . . . . . . . . . . 13
Using Your Headset . . . . . . . . . . . . 15
Charging Your Headset Battery . . . 15
Placing the Headset on Your Ear . . 18
Pairing Your Headset and Phone . . 19
Pairing to Additional Devices . . . . . 21
Making and Receiving Calls. . . . . . 22
LED Indicator Light . . . . . . . . . . . . 26
Audio Tones. . . . . . . . . . . . . . . . . . 28

DRAFT
4
Safety and General
Information
IMPORTANT INFORMATION ON SAFE AND
EFFICIENT OPERATION. READ THIS
INFORMATION BEFORE USING YOUR
DEVICE.
Users are not permitted to make changes or
modify the device in any way. Changes or
modifications not expressly approved by the party
responsible for compliance could void the user’s
authority to operate the equipment. See 47 CFR
Sec. 15.21.
This device complies with part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that
may cause undesired operation. See 47 CFR Sec.
15.19(3).

DRAFT
5
Electromagnetic
Interference/Compatibility
Note: Nearly every electronic device is
susceptible to electromagnetic interference (EMI)
if inadequately shielded, designed, or otherwise
configured for electromagnetic compatibility.
Facilities
To avoid electromagnetic interference and/or
compatibility conflicts, turn off your device in any
facility where posted notices instruct you to do
so. Hospitals or health care facilities may be
using equipment that is sensitive to external RF
energy.
Aircraft
When instructed to do so, turn off your device
when on board an aircraft. Any use of a device
must be in accordance with applicable
regulations per airline crew instructions.
Medical Devices
Hearing Aids
Some devices may interfere with some hearing

DRAFT
6
aids. In the event of such interference, you may
want to consult with your hearing aid
manufacturer to discuss alternatives.
Other Medical Devices
If you use any other personal medical device,
consult the manufacturer of your device to
determine if it is adequately shielded from RF
energy. Your physician may be able to assist you
in obtaining this information.
FCC Notice to Users
This equipment has been tested and found to
comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference in a
residential installation. This equipment
generates, uses and can radiate radio frequency
energy and, if not installed and used in
accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this

DRAFT
7
equipment does cause harmful interference to
radio or television reception, which can be
determined by turning the equipment off and on,
the user is encouraged to try to correct the
interference by one or more of the following
measures:
• Reorient or relocate the receiving
antenna.
• Increase the separation between the
equipment and the receiver.
• Connect the equipment to an outlet on a
circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced
radio/TV technician for help.
Battery Charger Safety
Save these Instructions
1 Do not expose the charger to rain or snow.

DRAFT
8
2 Do not operate the charger if it has received
a sharp blow, or has been dropped or
damaged in any way.
3 Do not disassemble the charger if it has
received a sharp blow, or has been dropped
or damaged in any way.
4 Never alter the AC cord or plug provided with
the unit. If plug will not fit the outlet, have
proper outlet installed by a qualified
electrician. An improper condition can result
in a risk of electric shock.
5 To reduce risk of damage to cord or plug, pull
the plug rather than the cord when
disconnecting charger from AC receptacle.
6 To reduce the risk of electric shock, unplug
the charger from the outlet before
attempting any maintenance or cleaning.
7 Use of an attachment not recommended or
sold by Motorola may result in a risk of fire,
electric shock, or personal injury.