Motorola 68000202346-A User manual

Quick Start Guide
motorola H17

your headset 1
your headset
Take a moment to familiarize yourself with your
new H17 Headset.
Boom
Charging
Port
Volume Down
Button
Call
Button
Ear
Speaker
Indicator
Light
Microphones
Volume Up
Button
Earhook

charge it2
charge it
You’ll need to charge your headset before using it.
Close the boom and plug the charger into the
charging port on your headset and a wall outlet.
The indicator light is red or yellow while the
battery is charging. When the battery is fully
charged, the indicator light turns green.
Note: Headset is not functional while charging.
Note: Your battery is designed to last the life of
your product. It should only be removed by a
recycling facility. Any attempt to remove or replace
your battery will damage your headset.

pair & connect 3
pair & connect
Let’s get your headset paired and connected to
your Bluetooth phone(s).
pair & connect first phone
1 Turn off any Bluetooth devices previously
paired (linked) with your headset.
2 Turn on the Bluetooth feature on your phone.
3 Turn on your headset and put headset on your
ear (see “turn on” on page 7 and “put it on”
on page 8 for help).
The indicator light becomes steadily lit in blue
and you hear
“ready to pair” .
4 Follow voice prompts to connect your phone
to your headset.
Note: When prompted for the passkey, enter
0000 .

pair & connect4
When your headset successfully pairs with your
phone, you hear
“pairing complete” . When
connected, you hear
“phone 1 connected” and
see the indicator light rapidly flash in blue and
purple.
pair & connect second
phone (optional)
1 Turn off first phone and any other Bluetooth
devices previously paired with your headset.
2 Turn your headset off by closing boom.
3 Turn on the Bluetooth feature on your phone.
4 Turn on your headset by opening boom and
put headset on your ear.
The indicator light becomes steadily lit in blue
and you hear
“ready to pair” .

pair & connect 5
5 Follow voice prompts to connect your phone
to your headset.
When your headset successfully pairs with your
phone, you hear
“pairing complete” . When
connected, you hear
“phone 1 connected” and
see the indicator light rapidly flash in blue and
purple.
To connect to both phones, simply turn on the first
phone while the second phone is connected.
When you hear
“phone 2 connected” , your
headset is connected to both phones. The last
paired phone (your second phone) is now your
primary phone (or “phone 1”) for voice dial
functionality.

pair & connect6
test your connection
1 Place the headset over your ear.
2 On one phone, dial a number and press the
Call/Send key. Repeat for the second phone.
If your phones and headset are successfully
connected, you hear ringing on the headset.
For daily use, make sure your headset is turned
on, and your phone’s Bluetooth feature is on. Your
headset and phone will connect automatically.

turn on & off 7
turn on & off
turn on
Open the headset boom. The indicator light
flashes blue three times, then flashes in blue and
purple (if connected with a device) or is steadily
blue (if ready to be paired).
turn off
Close the headset boom. The indicator light
flashes three times then turns off.

put it on8
put it on
You can wear your headset using either an
earhook or ear cushion.
wear with earhook
1 Remove and install all the supplied earhooks
to find a good fit.
2 Your headset comes ready for your right ear.
To change for your left ear:
1
From Right Ear
2
To Left Ear

put it on 9
3 Flex the earhook and loop it over your ear.
wear with ear cushion
1 Remove earhook from headset.

put it on10
2 Try out all the supplied ear cushions to get a
good fit.

battery check 11
battery check
Press both Volume Up and Volume Down buttons
while not on a call.
To save battery power, turn off the headset when
you don’t use it for an extended time by closing
the boom.
indicator
light
voice
prompt
talk time
red “battery
level is
low”
less than 1.5 hours
yellow
“battery
level is
medium”
between 1.5 to 3.5
hours
green
“battery
level is
high”
more than 3.5
hours

calls12
calls
To . . .
answer call Press the Call button.
reject call Press and hold a Volume button
until you hear an audio tone
make a voice
dial call
Press the Call button and you
hear an audio tone.
redial last call Press and hold the Call button
until you hear an audio tone.
mute or
unmute a call
Press and hold both Volume Up
and Volume Down buttons until
you hear “mute on” or “mute
off”.
end a call Press the Call button.
answer
second
incoming call
Press the Call button.

calls 13
Tip: When connected to two phones, voice
prompts help manage call functions such as voice
dial, redial, and end call. Follow the voice prompts
to execute a function on the desired phone.
Note: Your headset supports both Handsfree and
Headset Profiles. Accessing call functions
depends upon which profile your phone supports.
See the instructions that came with your phone.
Note: Some call features are phone/network
dependent.
reject
second
incoming call
Press and hold a Volume button
until you hear a tone.
To . . .

status indicators14
status indicators
indicator light (with charger
plugged in)
headset
indicator
headset status
red charging (battery level less than
50% charge)
yellow charging (battery level more than
50% charge)
green charging complete

status indicators 15
indicator light (with charger
not plugged in)
headset
indicator
headset status
off power off
three blue
flashes
powering on/off
steady
blue
pairing/connect mode
rapid blue/
purple
flashes
connection successful
quick blue
flash
incoming/outgoing call on
phone 1

status indicators16
quick
purple
flash
incoming/outgoing call on
phone 2
slow blue
pulse
connected (on a call)
slow blue
flash
standby (connected to one phone)
slow
green
flash
standby (connected to two
phones)
slow red
flash
idle (not connected to a phone)
headset
indicator
headset status

status indicators 17
Note: After 1 minute on a call or 20 minutes of
inactivity, the light stops flashing to conserve
power, but the headset remains on.
slow
purple
pulse
connected call muted
steady red attempting to connect
quick red
flash
low battery
headset
indicator
headset status

tips & tricks18
tips & tricks
enable/disable voice prompts
With the headset turned on, press and hold either
Volume button and Call button until you hear
“voice prompts on” or “voice prompts off”.
restore to factory settings
Caution: This action erases all pairing information
stored in your headset.
To restore your headset to original factory settings,
with the headset turned on, press and hold both
the Volume Up and Volume Down buttons and Call
button for 10 seconds until you hear “welcome to
the Motorola H17” and the indicator light is
steady blue.