Motorola BRAVO Encore User manual

A
BRAVO Encore!
Numeric Display Pager
Operating
Instructions
TurningYour Pager On:
• Press Wto turn your pager on.Your pager alerts
indicating that it is on.
The time of day and the“Alert Mode”indicator, silent
([) or audible (D), appears on the display.
Receiving and ReadingYour Messages:
Your BRAVO
Encore! pager can receive up to eight
20-character messages.
When a message is received, your pager alerts for
eight seconds.
• Press any button to stop the alert.
• PressWto display your message.
• Press Vtwice while reading your message to re-
turn to the main status screen.
Messages containing more than 12 characters dis-
play on a second screen.The (B) symbol indicates
additional screens.The second screen displays au-
tomatically after one minute, or you can pressWto
advance to the second screen.The last screen of
your message displays the message slot number
and the time your message was received.
If a message is left unread, the pager emits a re-
minder alert every two minutes, and the number of
unread messages is displayed on the screen (i.e., 1
page, 2 pages).
TurningYour Pager Off:
• PressXuntil thepager off ? prompt appears
on the display.
• PressWto turn your pager off.
When your pager is turned off, the clock display re-
mains on the screen.The “Alert Mode” indicator
does not.
Turning On the Light:
• Press Vwhile the clock or a message is dis-
played to turn on the display light.
• To turn off the light, press Vagain while the mes-
sage or the clock is displayed or allow it to turn off
automatically.
Alarm Indicator
Alert Mode Indicator
Message Time Stamp
Message Slot Number
Message Lock Indicator
Continuous Message Indicator
Alert Light
Backlight/Reset
Button ( )
Menu/Lock
Button
On/Read/Select
Button
Battery Door
Lock(Slideup
to unlock,
downtolock)
Slide Battery Door to Right
(Insert Positive End of Battery First)
Changing Alert Modes:
• PressX. Eithersilent ? oraudio ? appears,
depending on the current mode.For your pager
to vibrate, it must be in the“Silent” mode.
• To change the alert mode, press Wwhile your
choice appears on the display.
Setting the Clock:
• PressXuntilset time ? appears.
• PressWto set your pager’s clock.
• Press Xuntil the desired hour appears.To move
to the next digit, pressW. Repeat this process for
each field (hours, minutes, AM/PM).
• PressVtwice to return to the main status screen.
Setting the Alarm:
• PressXuntil set alarm ? appearson the display.
• PressWto select the alarm on/off sequence.
• PressXto turn on or turn off the alarm.To move
to the next digit, press W.To advance through
each digit press X.Repeat this process for each
field (On/Off, hours, minutes, AM/PM).
• PressVtwice to return to the main status screen.
The (\) indicator appears on the display when the
alarm is turned on. At the selected time, the alarm
vibrates or emits a unique 20-second alert, and
alarm appears on the display.
• Press any button to stop the alarm alert.
A set alarm activates even when your pager is off.
Locking Messages:
• To lock a message, press Xwhile reading your
message. A lock (E) appears on the display to in-
dicate that your message is protected.
• To unlock your message, press Xwhile reading
the locked message.

Locked messages cannot be erased, overwritten by
new messages when memory is full, or lost while re-
placing the battery. Up to four messages may be
locked at one time.
Erasing Messages From Memory:
• PressXuntilerase all ? appears on the dis-
play.
• Press W. All of your read, unlocked messages
will be erased.
The erase all ? prompt appears only if there are
read, unlocked messages in memory.
Battery Information:
Your BRAVO Encore!
pager is designed to operate
with an AAA-size alkaline battery.See diagram for bat-
tery door location.The hinged battery door, if detached
from the pager, can be easily snapped back into place.
Other Pager Features:
When the battery is reaching the end of its life, a low-
battery alert occurs and lo cell is displayed.Also, all
pager alerts are changed to two seconds.
overflow is displayed when the number of unread
messages received is greater than the available mes-
sage memory.The oldest unread message is replaced
by a new message.Once you have read all of your un-
read messages, the time of day appears on the display.
If the same message is received more than once,
duplicate appears at the beginning of the new
message.Your new message contains the latest
timestamp.
When a message is read that does not contain nu-
meric data, tone only appears on the display.
Repair and Maintenance
Your BRAVO
Encore! pager, properly handled, is ca-
pable of many years of trouble-free service. Howev-
er, should it ever require service, Motorola’s National
Service Organization, staffed with specially trained
technicians, offers conveniently located repair and
maintenance facilities throughout the country.
CleaningYour BRAVO
Encore! Pager:
To clean smudges and grime from the exterior of the
BRAVO
Encore! housing, use a soft, non-abrasive
cloth moistened in a mild soap and water solution.
Rinse the surface using a second cloth moistened in
clean water.Do not use alcohol or other cleaning
solutions.
Patent Information
This Motorola product is manufactured under one or
more Motorola U.S. Patents. A listing of these pat-
ents is provided on the underside of the belt clip and
on the inside surface of the back cover of the prod-
uct.Other U.S. Patents covering this product are
pending.
Motorola Inc., Paging Products Group
1500 Gateway Boulevard, Boynton Beach, FL 33426-8292
Printed in U.S.A. 1/94
@6881015B75@
6881015B75-B(x)