Motorola TALKABOUT FLEX T10 User manual

#
$
*(
™
NUMERIC PAGER
User’s Guide
Guide de l’utilisateur
Model T10
FLEXTM Technology
Modèle T10
Technologie FLEXMC
6881036b50o.fm Page -3 Wednesday, August 23, 2000 4:01 PM

6881036b50o.fm Page -2 Wednesday, August 23, 2000 4:01 PM

Contents
Introduction .................................................... 1
Effective Use of Your Pager......................... 1
Getting Started .............................................. 2
Battery Information..................................... 2
Installing/Replacing the Battery ................ 2
Control Buttons ........................................... 4
Turning Your Pager On ............................... 5
Turning Your Pager Off............................... 5
Sending a Test Page to Yourself.................. 6
Backlight ...................................................... 7
Using the Main Menu.................................. 8
Status Indicators ......................................... 8
Time and Date ................................................ 9
Setting the Time .......................................... 9
Setting the Date........................................... 9
Displaying the Date................................... 10
Setting the Alarm ...................................... 11
Alerts ............................................................ 12
Setting the Alert Type............................... 12
Reminder Alert .......................................... 13
Low Cell Alert............................................ 13
Messages ..................................................... 15
Reading Messages...................................... 15
Locking/Unlocking Messages .................... 16
Message Information................................. 16
Deleting Messages ..................................... 17
Care & Maintenance .................................... 18
Cleaning Your Pager.................................. 19
Questions ..................................................... 20
FCC Compliance .......................................... 21
6881036b50o.fm Page -1 Wednesday, August 23, 2000 4:01 PM

Table des matières
Introduction .................................................. 31
Utilisation efficace du Téléavertisseur..... 31
Mise en route ............................................... 32
Renseignements sur la pile ....................... 32
Installation et remplacement de la pile.... 32
Boutons de commande............................... 34
Mise sue tension du Téléavertisseur ........ 35
Mise hors tension du Téléavertisseur....... 35
Comment vous envoyer un message
d’essai .................................................... 36
Rétroéclairage ............................................ 37
Utilisation du menu principal................... 38
Indicateurs d'état....................................... 38
Date et heure ................................................ 39
Réglage de l'heure...................................... 39
Réglage de la date...................................... 39
Affichage de la date ................................... 40
Réglage de l'alarme.................................... 41
Avertissements ............................................ 42
Réglage du type d'avertissement .............. 42
Avertissment de rappel ............................. 43
Avertissement de pile faible...................... 43
Messages ..................................................... 45
Lecture des messages ................................ 45
Verrouiller et déverrouiller les messages. 46
Renseignements sur les messages ............ 46
Suppression des messages......................... 47
Entretien approprié ..................................... 49
Nettoyage du téléavertisseur .................... 50
Questions ..................................................... 51
Conformité FCC ........................................... 52
6881036b50o.fm Page 0 Wednesday, August 23, 2000 4:01 PM

INTRODUCTION
1
Introduction
Congratulations on your purchase of your
Talkabout™T10 pager.
This booklet contains operation
instructions that explain how to use your
new pager and provides helpful
suggestions for first-time as well as
experienced users.
Effective Use of Your Pager
Your pager can help you keep in contact
with everyone important to you. By
giving your pager number to business
associates, family, and friends, you can be
contacted whenever needed.
6881036b50o.fm Page 1 Wednesday, August 23, 2000 4:01 PM

GETTING STARTED
2
Getting Started
Battery Information
Your pager operates with a single
AAA-size alkaline battery (do not use
carbon zinc batteries). See the diagram
on the following page for the battery
door location.
If lobat displays, the pager’s AAA-size
battery is low. Replace the AAA-size
battery.
Installing/Replacing the Battery
Holding the pager face down, slide
the battery door in the direction of
the arrow (toward the outer edge).
Lift the battery door away from the
pager’s housing to remove it.
Remove the old battery, noting the
positive (+) and negative (-) polarity
markings.
Insert a new battery so the polarity
markings on the battery match the
polarity diagram in the battery
compartment.
6881036b50o.fm Page 2 Wednesday, August 23, 2000 4:01 PM

GETTING STARTED
3
Replace the battery door.
CAUTION!
Note the (+) and (-) polarity markings.
Do not insert the battery backwards, or
all messages will be erased.
6881036b50o.fm Page 3 Wednesday, August 23, 2000 4:01 PM

GETTING STARTED
4
Control Buttons
<Function: Pressto move between
features and change values.
>Select/Backlight: Press to select
features and turn on/off the
backlight.
=Read/Escape: Press to read
messages or return to the Status
screen.
#
$(
*
6881036b50o.fm Page 4 Wednesday, August 23, 2000 4:01 PM

GETTING STARTED
5
Turning Your Pager On
Ensure that a fresh battery is
properly installed as listed in
“Installing/Replacing the Battery”on
page 2.
Press and hold =for 3 to 4 seconds to
turn your pager on. The Status screen
displays.
When the pager is on and no activity is
taking place, the Status screen displays.
The Status screen displays the power-on
indicator and may also display other
pager status indicators.
Turning Your Pager Off
Press <until PAgEr OFF displays,
and then press >.
* \ #
4:29p
Battery Gauge
Time Display
Alarm Indicator
Alert Indicator
6881036b50o.fm Page 5 Wednesday, August 23, 2000 4:01 PM

GETTING STARTED
6
Sending a Test Page to Yourself
It's a good idea to test your pager and
service by sending a page to yourself.
Start by using the phone number, web
site, or email address (and a PIN, if
required) your service provider gave
you, then enter a short message. If you
are sending a word message from a
phone, an operator will assist you;
otherwise, press the phone buttons to
enter a numeric message or type a
message and send it. While you are
waiting for the message to reach your
pager, refer to page 15 for information
about how to read a message. If your
pager does not receive the message
within a few minutes, contact your
service provider. After you've tested the
pager, read the rest of this guide to learn
about the many useful features of your
new pager.
6881036b50o.fm Page 6 Wednesday, August 23, 2000 4:01 PM

GETTING STARTED
7
Backlight
In low-light conditions, you can turn on
the pager’s backlight on or off at any
time by pressing and holding >for two
seconds. The backlight automatically
turns off when the pager returns to the
Status screen.
6881036b50o.fm Page 7 Wednesday, August 23, 2000 4:01 PM

GETTING STARTED
8
Using the Main Menu
The main menu provides access to the
many features of your pager through the
use of symbols and prompts.
To navigate through the main menu,
press <.
Press >to select the displayed
feature.
Press =at any time to return to the
Status screen.
Status Indicators
The list below describes each of the
status indicators that may display on
your pager.
$New message
(Musical alert
\Silent alert
#Alarm
%Locked message
+Duplicate message
!Out-Of-Range alert
&Continuous message (press =to
display the next screen.)
6881036b50o.fm Page 8 Wednesday, August 23, 2000 4:01 PM

TIME AND DATE
9
Time and Date
Setting the Time
From the Status screen, press <
until Set Time displays, and then
press >.
Press <to increase the hour. When
the desired hour displays, press >to
advance to the next field.
Repeat Step 2 to set the minutes and
time of day (AM or PM).
When you have finished setting the
time, press =to save your changes and
return to the Status screen.
Setting the Date
From the Status screen, press <
until Set Date displays, and then
press >.
12:56 pm
jun 21 00
6881036b50o.fm Page 9 Wednesday, August 23, 2000 4:01 PM

TIME AND DATE
10
Press <to increase the year.
When the desired year displays,
press >.
Repeat Step 2 to set the month/day.
When you have finished setting the
date, press =to save your changes
and return to the Status screen.
Displaying the Date
To display the current date, proceed as
follows.
From the Status screen, press >.
The current date and day of week
displays in the following format.
jun 21 mon
6881036b50o.fm Page 10 Wednesday, August 23, 2000 4:01 PM

TIME AND DATE
11
Setting the Alarm
Your new pager allows you to set a
daily alarm.
From the Status screen, press <
until Set alarm displays, and then
press >.
Press <to increase the hour. When
the desired hour displays, press >to
advance to the next field.
Repeat Step 2 to set the minutes and
time of day (Aor P).
Press <to toggle between on and
off. When the desired selection
displays, press >to select it.
When you have finished setting the
alarm, press =to save your changes
and return to the Status screen.
12:34p on
6881036b50o.fm Page 11 Wednesday, August 23, 2000 4:01 PM

ALERTS
12
Alerts
Setting the Alert Type
Your new pager has both audible and
silent alert types. These alert types are:
silent (vibrate), sleep (no alert), vibra
call (vibrate then chirp), chirp, and eight
standard audible alerts.
To specify the alert to play when your
pager receives a message, proceed as
follows:
From the Status screen, press <
until SEt ALErt displays, and
press >.
Press <to display the alert type
and hear a sample of the alert.
When the desired alert type displays,
press >to select it.
uibracall
6881036b50o.fm Page 12 Wednesday, August 23, 2000 4:01 PM

ALERTS
13
Reminder Alert
This feature allows you to turn on/off
reminder alerts. Reminder alerts repeat
at two-minute intervals until you have
read all new messages. To turn on/off
reminder alerts, proceed as follows:
From the Status screen, press <
until Adu control displays, and then
press >. Rem Alt displays.
Press <to toggle between On and
Off. Press >to make your
selection.
Low Cell Alert
At the onset of a low battery condition,
lobat displays on the Status screen. You
can also program your pager to emit an
alert when your pager’s battery is low.
From the Status screen, press <
until adu control displays, and then
press >.
Press <until L Cell alert
displays, and then press >. The
following screen displays.
6881036b50o.fm Page 13 Wednesday, August 23, 2000 4:01 PM

ALERTS
14
Press <to toggle between on and
off, and press >to make your
selection.
•The low cell alert repeats hourly
between the hours of 8 a.m. and 8
p.m.
l c alt on
6881036b50o.fm Page 14 Wednesday, August 23, 2000 4:01 PM

MESSAGES
15
Messages
Your new Talkabout™T10 pager can
store up to 20 personal messages and 2
maildrop messages. If you have
programmed your pager to alert you
when it receives a message, an alert
sounds (see “Setting the Alert Type”on
page 12).
Reading Messages
From the Status screen, press =.
•When your pager receives an error
message, eis appended to the end of
the message when you display it.
•When your pager receives a group
message, it emits an alert, and group
msg displays.
•When your pager receives a maildrop
message, it emits an alert, and mail
msg displays.
12:38/ %&
C06]12345678
Time Stamp
Message number
(if programmed) Message
Locked Message
Indicator
Message
Continued
6881036b50o.fm Page 15 Wednesday, August 23, 2000 4:01 PM

MESSAGES
16
Locking/Unlocking Messages
You can lock up to ten messages to
prevent them from being deleted or
overwritten by new messages when the
pager’s memory is full.
•To lock a message, press <while
the message displays.
•To unlock a message, press <
while the locked message displays.
Message Information
When you receive a message, you can
program your pager to display
additional message information. To turn
this feature on/off, proceed as follows:
From the Status screen, press <
until adu control displays, and
then press >.
Press >until msg info displays,
and then press >.
Press <to toggle between on and
off, and press >to make your
selection.
6881036b50o.fm Page 16 Wednesday, August 23, 2000 4:01 PM