Motorola Roadster 2 User manual

Quick Start Guide
MOTOROLA
ROADSTER 2™

EN

1EN Congratulations
Congratulations
Your MOTOROLA ROADSTER 2™ Bluetooth® Car Kit
allows you to make and receive calls and play music
from your phone while safely keeping your hands on the
steering wheel.
With the ROADSTER 2, you can:
•Simultaneously connect with two phones.
•Hear caller’s name or number, and use your voice to
answer or ignore calls.
•Switch between your FM radio and car kit speaker.
•Hear voice prompts to guide you on connections,
battery level, and other functions.
We’ve crammed all of the main features of your car kit
into this handy guide, and in a matter of minutes we’ll
show you just how easy your car kit is to use.
So go on, check it out.
More information
On the web: www.motorola.com/support
Caution: Before using your car kit for the first time,
please read the important Safety, Regulatory &
Legal information at the back of this guide.

2Your car kit EN
Your car kit
the important parts
Call
Button
Power
Switch
Status
Light
Mute
Button
Voice
Dial
Button
Charge
Light Micro USB
Charging
Connector
Music
Button
Volume /
FM Tune
Down
Button
Volume /
FM Tune
Up
Button
FM / Speaker
Button
Speaker

3EN Charge it
Charge it
let’s get you up and running
You can use your car kit while unplugged or plugged into
the charger.
Note: Your battery is designed to last the life of your
product. It should only be removed by a recycling facility.
Any attempt to remove or replace your battery will
damage your car kit.
Charge Light
Red = charging
Green = fully charged

4Basics EN
Basics
a few essentials to get your started
Install it
Turn it on & off
The car kit automatically turns off when your phone is
moved away from the car for more than 1 minute.
When you return (open the car door), the car kit turns
back on and reconnects to your phone.
Note: Moving the car kit or the power switch off and on
also turns it on.
Slide onto car visor
OnOff

5EN Basics
Listen to music
Note: This feature is phone dependent.
Your car kit allows you to stream Bluetooth music from
your phone.
Press to play/pause music from your phone on your
car kit speaker or car radio.
To advance to the next song, press and hold until you
hear a tone.
While a call is active, music pauses. When the call ends,
music resumes playing.
Note: The volume setting on your phone may impact
volume on your car kit.
Some call features
Voice commands
Answer or ignore calls using your voice—just say
“answer” or “ignore”.
Note: This feature does not work for second incoming
calls.
Hear caller’s name
If your phone knows your caller’s name, then you hear
“call from <name>” on an incoming call.
Note: If the caller is not in your phone’s contact list (or
your phone does not support this feature), then you hear
the incoming call’s number.

6Basics EN
Voice Dialing
Press to activate your phone's voice recognition (on
phones that support this feature) to call anyone stored in
your phonebook.
If you have another voice controlled application on your
phone (like MotoSpeak), then the phone may display a
prompt asking which operation you wish to perform the
first time you press the Voice Dial button.

7EN Pair & connect
Pair & connect
connect and go
Pair & connect with your phone
1Turn off any Bluetooth devices previously paired with
your car kit.
2Turn on the Bluetooth feature on your phone.
3Turn on your car kit (see “Turn it on & off” on page 4).
The status light becomes steadily lit in blue and you hear
“ready to pair”.
4Follow the voice prompts to connect your phone to
your car kit.
Note: When prompted for the passkey, enter 0000.
When your car kit successfully pairs with your phone,
you hear “pairing complete”.
Note: After pairing, you may be asked by your phone to
grant phonebook access to your car kit. If prompted, say
"always accept".
For daily use, make sure your car kit is turned on, and
your phone’s Bluetooth feature is on. Your car kit and
phone will connect automatically.
Pair & connect a second phone
1Turn off the first phone and any other Bluetooth
devices previously paired with your car kit.

8Pair & connect EN
2Turn your car kit off.
3Turn on the Bluetooth feature on your phone.
4Turn on your car kit.
The status light becomes steadily lit in blue and you hear
“ready to pair”.
5Follow the voice prompts to connect your phone to
your car kit.
Note: When prompted for the passkey, enter 0000.
When your car kit successfully pairs with your phone,
you hear “pairing complete”.
Note: After pairing, you may be asked by your phone to
grant phonebook access to your car kit. If prompted, say
"always accept".
To connect both phone(s) and/or music device, turn
these on and then turn your car kit off and on. When you
hear “<phone 1 name> connected”, and “<phone 2
name> connected”, your car kit is ready to go. The last
paired phone is your primary phone for calling features.