Mountain Buggy swift Manual

For all Mountain Buggy™models:
swift™
urban jungle™
duo™
terrain™
Our buggies conform to the following safety standards:
EN 1888:2005, ASTM F833-08, SOR/85-379 & AS/NZS 2088:2000 – CPN8
terrain only - AS/NZS 2088:2009 – CPN8
Model swift MB1-S1, Model urban jungle MB1-U1, Model duo MB1-U2. Model terrain MB1-T1
Issue June 2010
mountain
buggy
®
life without limit™
buggy instruction guide
English

English
1
Welcome
Congratulations on your purchase of a mountain buggy.
We know how precious and inspiring a new little person can be in your world.
It’s so important to be able to show your baby to the world and just as important
to show the world to your baby.
At Mountain Buggy you and your baby matter to us. That’s why we have spent
years researching and developing a product that is safe, comfortable and in tune
with modern parents’ needs. We want you to be able to live your new family
lifestyle with all the freedom and satisfaction you have always experienced.
Please take the time to read through this manual carefully. Your mountain buggy
will provide you with optimum safety if you follow the instructions as detailed.
If you have any concerns, questions or comments about your mountain buggy
or how to use it, please do not hesitate to contact us. We’d love to hear from you.

2
Important: read instructions carefully, follow them strictly and keep this booklet for
future reference. Your child’s safety is your responsibility.
Capacity
• urbanjungle,swift,duoandterrainseatissuitableforchildrenfrom
newborn up to 6 years.
• Forusewithanewborn(0-6months)theseatshouldbereclinedfully.
• Othernewbornoptionsinclude:
1. mountain buggy® carrycot
2. mountain buggy® travel system
• Maximumseatloadingforswift,urbanjungleandterrainis35kg/77lb,and
25kg/55lbperseatonduo.Thisseatisforachildof100cm/39.4”maximum
height.Maximumloadingforthestoragebasketis5kg/11lb.
Important Use Information
• Neverleaveyourchildunattended.
• Ensurethatalllockingdevicesareengagedbeforeuse.
• Thisbuggyisdesignedforonechildineachseat.
• Passengershouldremainseated(nostandinginthebuggy).
• Topreventthebuggyfrombecomingunstable,donotplaceparcels
or accessory items anywhere except in the storage basket and pockets
provided. Do not hang items such as shopping bags from the frame.
• Overloadingandincorrectfoldingmaydamageorbreakthisbuggy.
• Accessoriesorreplacementpartsthatarenotapprovedbythemanufacturer
or distributor should not be used.
• Excessiveweightmaycreatehazardousunstableconditions.
Do not use buggy on travelators or escalators.•
• Donotusenearanopenreorexposedame.
FOR THE SAKE OF YOUR PRECIOUS PASSENGER, PLEASE READ THESE
WARNINGS BEFORE USING YOUR MOUNTAIN BUGGY.

English
3
Erecting and Folding the Buggy
Folding your buggy
1. Foldhandleadjusterunder.
2. Push sunhood back.
3. Ensurefrontwheel(s)areunlockedandrotated
forward before folding.
4. Flicktheslidinglockguardoutandpullupthesliding
lock on both sides of the foot rest.
Putting up your buggy
Whenyourstreceiveyourbuggy,removeitfromthebox
and the plastic outer wrapping.
Dispose of plastic wrapping safely to avoid a child suocating.
1. Grip buggy above hinge joints, and lift.
2. Place pressure on foot rest to ensure sliding locks are
fully engaged.
3. Clipsunhoodontothebuggyframe.
WARNING: Ensurethatalllockingdevices
are engaged before use.

4
Front Wheel Assembly
1. Holding both knobs at the same time, unscrew and
pull out the front axle.
2. Insert the front wheel.
3. Re-inserttheaxleandtightenbothknobsbyhand
to secure wheel in place.
To remove
Repeataboveinreverse.
Tracking device (terrain only)
1. Swivel front wheel straight ahead in the lock
forward position.
2. Loosen knobs on both sides of front wheel.
3. Movetrackingadjustorforwardorbackwardto
adjust wheel position, so it runs in a straight line.
4. Tightenknobstosecurethefrontwheelinplace.
Rear Wheel Assembly
1. swift,urbanjungleandterrainwithpush-inaxle:
 • Pushforwardonthegreyaxlereleasetaband
push the axles out slightly and release the tab.
 • Pushtheaxleoutfurtheruntilyouhearaclick.
2. all buggies:
 • Slidewheels(withbrakecogfacinginwards)
onto the axles.
 • Pusheachwheelonuntilitclicksintoplace.
Pull on the wheel to ensure it is secure.
To remove
Depress quick release clip and slide wheel o axles. swift,
urban jungle and terrain axles can be pushed in to reduce
thetotalfoldedsize.Pushtheaxlereleasetabandpushthe
axles in until they click into place.
Wheel Assembly
axle
tracking
adjustor

English
5
Front Swivel Wheel
Locking the front swivel wheel is recommended for use on
uneven ground.
To lock Pull knob out and turn it so the ‘locked’ symbol is at
 thetopthenswivelfrontwheel(s)underbuggy
until it locks into place.
To unlock Pullknoboutandturnit1/4ofaturnsothe
‘unlocked’ symbol is at the top.
To lock forward (terrain only)
Pull knob out and turn it so the ‘locked’ symbol is at the top then
swivel front wheel straight ahead, away from the buggy, until it
locks into place.
knob
It is important to put the park brake on whenever you park
thebuggy.Ensureitisonwhenputtingyourchildinortaking
your child out of the buggy.
Park Brake
To release
Lift park brake lever completely up.
To apply
Push park brake lever completely down. brake lever
Hand Brake (terrain only)
To brake, apply pressure on the hand lever. If the buggy isn’t
stopping in a straight line, there is an adjustor on both wheels.

6
Safety Wrist Strap
Bumper Bar
Usethesafetywriststrapinallsituations.Ensurethatthe
loop of the strap is located around the wrist of the person
pushing the buggy.
Care should be taken if the buggy is used down hills
or in strong winds.
wrist strap
Seat Recline
The seat back can be reclined to any position between the
upright and fully reclined positions.
To recline
Pull on the buckles to slide the straps through the buckles
and recline the seat.
To raise
Pull straps through the buckles to raise the seat angle.
buckles
strap
To attach
1. Pull fabric back between hinge joint and sunhood
lug to expose part of the frame.
2. Fitsnap-lockofbumperbartoframe.
3. Closelocksonbothsidestosecurelylockontoframe.
WARNING: The bumper bar does not
replace safety harness. Secure infant
in safety harness at all times. Do not use
the bumper bar as a carrying handle.

English
7
To fasten
Clip shoulder strap buckle ends into crotch plate.
To release
Pressredbuttons(ifpresentonyourmodel)andsqueezetabs
on either side of crotch plate to release shoulder straps.
To adjust shoulder straps height
1. Locate buckle by slipping hand up the inside back of
the seat.
2. Push the rectangular shaped buckle through the
insertion slot on an angle, pushing the corner of the
bucklerst.
3. Re-threadthecornerofthebucklethroughthemost
suitable height insertion slot for your child.
4. Oncethebuckleisthroughtheslot,twistitsoitisat
against the seat back and then check it is secure by
pulling on strap.
* Fornewerversions,twistandpushup/downthe
slider to the suitable height for your child.
To adjust harness length
Locate buckles inside shoulder pads and lift buckle up.
• Pullharnessstrapstolengthenharness
• Pullstrapendstoshortenharness
The buggy comes with the shoulder straps set to newborn position. Shoulder strap height should
be located just below or level with a child’s shoulders. The older the child, the further up the seat the
straps need to be.
red buttons
squeeze
WARNING: Use this harness at all times.
When not in use, disconnect shoulder
strapsfromthewaiststrapand/orbuckle
astheymaybeastrangulationhazard.
Safety Harness
*

8
Removing Seat and Sunhood
Sunhood removal
1. Detach sunhood from sunhood lugs on either side
of buggy frame.
2. Unfasten sunhood domes that attach the sunhood
to buggy frame and to buggy seat back.
To ret sunhood
Followremovalinstructionsinreverse.
sunhood
lug
sunhood
clip
Seat removal
1. Unfastenseatdomesfromframealongsidetubes(4
domeseachside).
2. Unfasten strap underneath seat and those attached
toframe(1strapeachside).
3. Unfastenthedomeswhichfastenthesunhoodand
seat together.
To ret seat
Followremovalinstructionsinreverse.Ensurefabricis
domedOVERframe.

English
9
Regularmaintenanceisneededtokeepthebuggyworkingeectivelyandsafely.
Cleaning
Fabric
The fabric should be cleaned regularly. Brush o any excessive dirt or sand and rinse with lukewarm
water.Fabriccanberemovedandwashedbyhandusingamildnaturalsoapsolutioninlukewarm
water(nomorethan38°C/100°F).Rinsethoroughly.DONOTtumbledryordryinstrongsunlight.
To avoid fabric fading, cover the buggy if it is exposed to direct sunlight through glass e.g. in a car or if
stored in exposed areas.
Frame
If the buggy is used in exposed environments such as salt water, salt spray or beach sand, wash any
steel parts of the buggy by hosing the buggy or use warm soapy water, dry thoroughly and protect by
sprayingwithlightaerosolcanoil,egWD40®orCRC®.
Storage
Storebuggyinsideinadryplacebutawayfromcentralheatingunits/radiatorsanddonotstorein
airingorhotwatercupboards.Fabricmaydevelopmouldormildewifstoredinhumidordamp
conditions.
Tyres/Tubes
If a puncture occurs the inner tube can be repaired with a bicycle repair kit, or replaced.•
If tread becomes worn the tyre should be replaced. Contact your local dealer, or most cycle•
stores have tubes and repair kits.
Inatetyrestopressureof20psi(140KPa).Donotexceed30psi(210KPa).•
Handlebar Grip
Take care to protect the handlebar grip from abrasion or sharp
objects. Your local dealer can arrange replacement grips and
instructions if required.
Brake
The brake should be lubricated regularly to maintain
optimum operation. It may require extra lubrication if it is
dicult to operate.
Buggy Care
lubricate
this
surface

10
Transporting your buggy
A special locking strap is located on the cross brace bar, or for the swift on the handlebar. Wrap this
strap around the axle and then clip fasteners together to secure buggy closed when folded.
Tyre Pump
To use a pump, remove the connection hose and attach relevant ends to top of pump and wheel valve.
Donotovertighten.Ensurethereisnotensionontheconnectionhosewhileinatingtyre.
Protective Covers
Sun
Zip the sun cover to the buggy sunhood and fasten the
toggles to the sides and attach the strap under the foot plate.
Note:duosuncoverfastensoverthesunhood.
Storm
Fitthecoveroverthesunhoodandfastenthetogglestothe
top and sides, and attach the strap under the foot plate.
Important
• Removethestormorsuncoverbeforefoldingthebuggy
to avoid damage.
• Remembernottoleavethestormcoveroninwarm
conditions, and check your child’s comfort frequently.
•Always check your child to make sure they are not
overheating.
strap
strap
Top Tips
Handbrake Care (terrain only)
As the brake wears you can adjust it by unscrewing the
locking collar and winding out the brake adjustor until brake
tension is correct. Then rewind locking collar back in.
Brakepads (terrain only)
If the brakes start making scrapping noises then check brake
pads are not worn.
locking collar brake
adjustor
brake
pad

English
11
Mountain Buggy World Warranty
Ourproductsarewarrantedagainstdefectsinmaterialsandworkmanshipforoneyearfromthedate
of purchase. If the product has a manufacturing fault we will repair it free of charge. If not practical to
repair it, we will, at our discretion, replace the part in question. If the product fails due to wear and tear,
accident, neglect or negligence, or is outside the warranty, we will happily repair it for a reasonable
charge.*
Who is covered?
The original purchaser buying product from an authorised dealer in the same country as the purchaser.
Proof of purchase is required.
What is covered?
Workmanship or materials that are deemed by us to be faulty, providing the product has at all times
been used in normal conditions in accordance with instructions, and has been properly maintained.
What is not covered?
Secondhandproduct,modiedproduct,poorlymaintainedproduct,normalwear,fadingandfabriccuts,
improperuse(bywayofexample):abnormaluse;notfollowinginstructions;damagecausedbyexposureto
excessiveheat;punctures;overinationoftyres;childleftunattended;excessiveload;transportdamage
i.e. airline or freight damage.
Customer costs within warranty
The customer is responsible for any inwards freight charge to return the product to the manufacturer
oritsrepresentativeforwarrantyand/orservice.
Customer costs outside warranty
Where proof of purchase is not provided or the product is outside of the one year warranty period, the
manufacturer(oragent)reservestherighttochargeaservicefeeand/orchargeforpartsreplaced/
repaired. A return freight charge will also apply.
Exclusions
Any consequential loss or damage to any person or property directly or indirectly as a result of using
the product.
Who do I contact?
Consult the warranty section of the Mountain Buggy website
(www.mountainbuggy.com/warranty)whichguidesyouthroughthewarrantyclaimprocess.
Note:youwillneedtoprovideproofofpurchase.
Register product
Please register your product online by visiting www.mountainbuggy.com
*Consumers may have extra rights in some countries or states.

12
Parts of the Buggy Frame
Note: Diagram is urban jungle model *Points to lubricate periodically
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
1. Handlebar
2. Handle Adjuster
3.Crossbracebar
4.Sidetube
5.Brakelever
6. Brake cog
7.BrakeCam*
8.Rearaxle
9.Rearwheel
10.Quickreleaseclip
11. Base tube
12. Sunhood lugs
13.Downtube
14.Hingejoint
15.Slidinglock*
16. Secondary lock
17.Riserplate
18.Footrest
19.Swivelknob
20.Frontwheelswivel*
21.Frontwheel

English
13
ESSENTIAL WARNINGS
WARNING
IMPORTANT–READTHEINSTRUCTIONSCAREFULLYBEFOREUSEANDKEEP
THEMFORFUTUREREFERENCE.YOURCHILD’SSAFETYMAYBEAFFECTEDIF
YOUDONOTFOLLOWTHESEINSTRUCTIONS.
American Safety Standard (ASTM:F833-08/10) states:
WARNING
Neverleaveyourchildunattended.
WARNING
Always use the safety harness to avoid serious injury from falling or sliding
out.Alwayssecureallsafetyharnessstrapsandensureitscorrectlyttedand
adjustedtosecurethechildrmly.
European Safety Standard (EN 1888:2005) states:
WARNING
It may be dangerour to leave your child unattended.
WARNING
Ensurethatalllockingdevicesareengagedbeforeuse.
WARNING
Use a harness as soon as your child can sit unaided.
WARNING
Put on all brakes whenever you park the buggy and whenever you are
loading and unloading children.
WARNING
Any load attached to the handle aects the stability of the stroller.
WARNING
Check that the pram body or seat unit attachment devices are correctly
engaged before use.

14
ESSENTIAL WARNINGS
WARNING
This product is not suitable for running or skating.
Australia/New Zealand Safety Standard (AS/NZS:2088:2009+CPN8) states:
WARNING
To avoid injury or death:
Always apply the breaks whenever the stroller is stationary.
Do not leave children unattended.•
Secure the child in the harness at all times.•
Do not carry extra children or bags on this stroller.•
Make sure children are clear of any moving parts if you adjust the stroller.•
WARNING
It is unsafe to use accesories other than those approved by the vehicles
manufacturer.
WARNING
The buggy should not be used unassisted on stairs or escalators.
WARNING
Avoid serious injury from falling or sliding out. Always use seat belt.
Canadian Safety Standard (SOR/85-379) states:
WARNING
Neverleaveyourchildunattendedinthestroller.
WARNING
The buggy may become unstable if the recommended load is exceeded.
WARNING
Takecarewhenfoldingorunfoldingthebuggytopreventyourngersbeing
entrapped.