Moxa Technologies UC-8580-T-CT-LX Instructions for use

UC-8580 Series Hardware User’s Manual
Edition 1.0, August 2017
www.moxa.com/product
© 2017 Moxa Inc. All rights reserved.

UC-8580 Series Hardware User’s Manual
The software described in this manual is furnished under a license agreement and may be used only in accordance with
the terms of that agreement.
Copyright Notice
© 2017 Moxa Inc. All rights reserved.
Trademarks
The MOXA logo is a registered trademark of Moxa Inc.
All other trademarks or registered marks in this manual belong to their respective manufacturers.
Disclaimer
Information in this document is subject to change without notice and does not represent a commitment on the part of
Moxa.
Moxa provides this document as is, without warranty of any kind, either expressed or implied, including, but not limited
to, its particular purpose. Moxa reserves the right to make improvements and/or changes to this manual, or to the
products and/or the programs described in this manual, at any time.
Information provided in this manual is intended to be accurate and reliable. However, Moxa assumes no responsibility for
its use, or for any infringements on the rights of third parties that may result from its use.
This product might include unintentional technical or typographical errors. Changes are periodically made to the
information herein to correct such errors, and these changes are incorporated into new editions of the publication.
Technical Support Contact Information
www.moxa.com/support
Moxa Americas
Toll
-free: 1-888-669-2872
Tel:
[phone]
Fa
x: [phone]
Moxa China (Shanghai office)
Toll
-free: 800-820-5036
Tel:
[phone]
Fax:
[phone]
Moxa Europe
Tel:
[phone]
Fax:
[phone]
Moxa Asia
-Pacific
Tel:
[phone]
Fax:
[phone]
Moxa India
Tel:
[phone]
Fax:
[phone]

Table of Contents
1. Introduction ...................................................................................................................................... 1-1
Model Descriptions and Package Checklist..............................................................................................1-2
Product Features ................................................................................................................................1-2
Hardware Specifications ......................................................................................................................1-3
Hardware Block Diagram .....................................................................................................................1-5
2. Hardware Introduction ..................................................................................................................... 2-1
Appearance........................................................................................................................................2-2
Dimensions ........................................................................................................................................2-2
LED Indicators....................................................................................................................................2-3
Reset Button ......................................................................................................................................2-3
3. Hardware Connection Description ..................................................................................................... 3-1
Installing the UC-8580 Series...............................................................................................................3-2
Wiring Requirements...........................................................................................................................3-2
Connecting the Power ..................................................................................................................3-3
Grounding the Unit ......................................................................................................................3-3
Connecting Data Transmission Cables ...................................................................................................3-4
Connecting to an Ethernet Network ...............................................................................................3-4
Connecting a Serial Device ...........................................................................................................3-4
Connecting Digital Input/ Output Devices .......................................................................................3-5
Connecting a USB Device .............................................................................................................3-6
Connecting Wi-Fi/Cellular Modules and Installing Antennas ......................................................................3-6
Installing SIM Cards for the Cellular Modules........................................................................................ 3-10
Installing the mSATA Module.............................................................................................................. 3-11

1
1. Introduction
Thank you for using Moxa’s UC-8580 Series computer. The UC-8580 Series computer is a programmable
communication-centric gateway offering a rich variety of communication interfaces, such as Ethernet, serial,
and digital inputs/outputs. This EN 50155-compliant computer is built for rail applications and comes with
multiple wireless WAN gateway interfaces making it an ideal choice for building wireless communication
infrastructure with 802.11b/g/n/ac and LTE data collection and transmission.
This computer runs on the Debian Linux operating system, providing a powerful communication platform
without generating too much heat, even when loaded with heavy application tasks. In addition, the mSATA
socket helps you easily expand the storage capacity for large-scale data acquisition.
This chapter describes the product package checklist, product features, and hardware specifications.
The following topics are covered in this chapter:

Model Descriptions and Package Checklist

Product Features

Hardware Specifications

Hardware Block Diagram

UC-8580 Series Hardware Introduction
1-2
Model Descriptions and Package Checklist
The UC-8580 Series consists of the following models:
•UC-8580-LX: Programmable multiple-wireless computing platform for rail onboard applications,
supporting up to 4 wireless modules, with -25 to 55°C operating temperature range
•UC-8580-T-LX: Programmable multiple-wireless computing platform for rail onboard applications,
supporting up to 4 wireless modules, with -40 to 70°C operating temperature range
•UC-8580-T-CT-LX: Programmable multiple-wireless computing platform for rail onboard applications,
supporting up to 4 wireless modules, with -40 to 70°C operating temperature range and conformal coating
The UC-8580 Series computer is shipped with the following items.
•UC-8580 Series computer
•CBL-4PINDB9F-100: 4-pin pin header to DB9 female console port cable, 100 cm
•Quick Installation Guide (printed)
•Warranty card
Product Features
The UC-8580 Series computer includes the following features:
•ARMv7 Cortex-A7 dual-core 1 GHz processor
•1 GB DDR3L SDRAM
•4 GB eMMC for OS
•1 mSATA slot for expansion storage
•2 auto-sensing 10/100/1000 Mbps Ethernet M12 ports
•1 USB 3.0/2.0 host with Type A connector
•Up to 4 PCIe mini slots (1 PCIe/USB 2.0 and 3 USB 2.0 signals)
•Isolated power input with a wide range of 24 to 110 VDC

UC-8580 Series Hardware Introduction
1-3
Hardware Specifications
Hardware Specifications
Computer
CPU:
ARMv7 Cortex-A7 dual-core 1GHz processor
USB:
USB 3.0/2.0 host x 1 (type A connector)
DRAM:
1 GB DDR3L SDRAM
OS (pre
-installed): Debian ARM 8 (Kernel 4.1)
Storage
Expansion:
1 mSATA slot for storage expansion
Ethernet Interface
LAN:
2 auto-sensing 10/100/1000 Mbps ports (M12)
Magnetic
Isolation Protection: 1.5 kV built-in
Serial Interface
Serial Standards:
2 RS-232/422/485 ports, software-selectable (5-pin terminal block connector)
Console Port:
RS-232 (TxD, RxD, GND), 4-pin pin header (115200, n, 8, 1)
Serial Communication
Parameters
Data Bits:
5, 6, 7, 8
Stop Bits:
1, 1.5, 2
Parity:
None, Even, Odd, Space, Mark
Flow Control:
XON/XOFF, ADDC® (automatic data direction control) for RS-485
Baudrate:
921600 bps (max.)
Serial Signals
RS
-232: TxD, RxD, RTS, CTS, GND
RS
-422: TxD+, TxD-, RxD+, RxD-, GND
RS
-485-4w: TxD+, TxD-, RxD+, RxD-, GND
RS
-485-2w: Data+, Data-, GND
Digital Input/Output
Digital input:
3 (terminal block)
Input Voltage:
0 to 30 VDC at 25 Hz
Digital Input Levels for Dry Contacts:
Logic level
0: Close to GND
Logic level 1: Open
Digital Input Levels for Wet Contacts:
Logic level 0:
0 to 3 V
Logic level 1: +10 V to +30 V (COM to DI)
Output Channels:
3, sink type
DO Default Value:
High-Z
DO IO Type:
Open drain
Maximum Output Current:
200 mA per channel
On
-State Voltage: 24 VDC nominal, open collector to 30 VDC
Isolation:
3 KV optical isolation
Connector
s: 10-pin terminal blocks with CAGE CLAMP® connection, COM, DIs x 3, IGT (Ignition Control),
Ignition Ground, DOs x 3, GND
GPS Module
Mod
ule: U-Blox NEO-M8Q-0
Antenna Type:
Passive
Connector Type:
SMA (F)
LEDs
System:
power x 1, system ready x 1
LAN:
100/1000 M x 4
Programmable:
Diagnostics x 1
Serial:
Tx x 2, Rx x 2

UC-8580 Series Hardware Introduction
1-4
Storage:
storage x 1
Cellular/Wi
-Fi: Cellular/Wi-Fi x 12
Button
Reset:
Reset the device to factory defaults button x 1
Physical Characteristics
Housing:
AI 5052 + ADC 12
Weight:
2.2 kg (4.86 lb)
Dimensions:
220 x 134 x 88.3 mm (8.66 x 5.28 x 3.48 in) without wall mount ear
270 x 134 x 88.3 mm (10.63 x
5.28 x 3.48 in) with wall mount ear
Mounting:
wall
Environmental Limits
Operating Temperature:
Wide Temp. Models:
-40 to 70°C (-40 to 158°F)
Wide Temp. M
odels: -40 to 70°C (-40 to 158°F), with the LTE accessory installed
Storage Temperature:
-40 to 85°C (-40 to 185°F)
Ambient Relative Humidity:
5 to 95% (non-condensing)
Anti
-Vibration: 7.9 m/s2@ EN 50155 random wave,5-150 Hz, 5 hr per axis
Anti
-Shock: 50 m/s2@ EN 50155, half sine wave, 30 ms
Power Requirements
Input Voltage:
24 to 110 VDC (2-pin M12, V+, V-)
Input Current:
1.66 A @ 24 VDC
Power Consumption:
Less than 40 W (with external loading on USB port and PCIe mini card)
Standards and Certifications
Safety:
UL 60950-1, CSA C22.2 No. 60950-1-03, EN 60950-1
EMC:
EN 55022 Class A, EN 55024-4-2, EN 55024-4-3, EN 55024-4-4, FCC Part 15 Subpart B Class A
Rail Certification:
EN 50155, EN 50121-4, NFPA 130
Green Product:
RoHS, CRoHS, WEEE
Reliability
Alert Tools:
External RTC (real-time clock)
Automatic Reboot
Trigger: External WDT (watchdog timer)
Warranty
Warranty Period:
5 years
Details:
See www.moxa.com/warranty

UC-8580 Series Hardware Introduction
1-5
Hardware Block Diagram

2
2. Hardware Introduction
The UC-8580 computer is compact and designed to be rugged enough for industrial applications. This chapter
provides information on the appearance and dimensions of the UC-8580 and describes the LED indicators, reset
button, and RTC that can help you monitor system performance and identify issues. The multiple serial ports on
the UC-8580 allow you to connect different devices for wireless operation, and the reliable and stable hardware
platform lets you devote your attention to developing your applications.
The following topics are covered in this chapter:

Appearance

Dimensions

LED Indicators

Reset Button

UC-8580 Series Hardware Hardware Introduction
2-2
Appearance
Front View
Dimensions
Unit = mm (in)