Moxa Technologies CN2600 Series User manual

– 1 – – 2 – – 3 –
P/N: 1802026000021
CN2600 Series
Quick Installation Guide
Second Edition, November 2010
1. Overview
The Moxa CN2600 dual-LAN terminal servers have 8 or 16 RS-232
or RS-232/422/485 ports and dual 10/100 Mbps Ethernet LAN
ports, and some models come with dual AC power inputs. The
CN2600 terminal servers are used to connect terminals, modems,
printers, and other serial devices to LAN hosts, and all models
comply with TCP/IP and IEEE802.3 specifications using standard
twisted pair 10/100BaseTX cable as the transmission medium.
2. CN2600 series Models
Model Name
Description
CN2610-8
8 RS-232 ports with RJ45 connectors,
100-240 VAC input.
CN2610-8-2AC 8 RS-232 ports with RJ45 connectors,
2 100-240 VAC input.
CN2610-16
16 RS-232 ports with RJ45 connectors,
100-240 VAC power input
CN2610-16-2AC 16 RS-232 ports with RJ45 connectors,
2 100-240 VAC power input
CN2650-8
8 RS-232/422/485 ports with RJ45 connectors,
100-240 VAC power inputs
CN2650-8-2AC-
T
Dual-LAN, dual-AC-
power terminal server with 8
RS-232/422/485 ports, -40 to 75°C operating
temperature
CN2650-8-2AC 8 RS-232/422/485 ports with RJ45 connectors,
100-240 VAC power inputs
CN2650-16
16 RS-232/422/485 ports with RJ45 connectors,
100-240 VAC power inputs
CN2650-16-2AC
-T
Dual-LAN, dual-AC-power terminal server with
16 RS-232/422/485 ports, -40 to 75°C operating
temperature
CN2650-16-2AC 16 RS-
232/422/485 ports with RJ45 connectors,
2 100-240 VAC power inputs
CN2650I-8
8 RS-232/422/485 ports with DB9-M connectors
and 2 KV isolation protection, 100-240 VAC
power input
CN2650I-8-2AC
8 RS-232/422/485 ports with DB9-M connectors
and 2 KV isolation protection, 2 100-240 VAC
power input
CN2650I-16
16 RS-232/422/485 ports with DB9-M
connectors and 2 KV isolation protection,
100-240 VAC power inputs
CN2650I-16-2AC
16 RS-232/422/485 ports with DB9-M
connectors and 2 KV isolation protection, 2
100-240 VAC power inputs
3. Package Checklist
The CN2600 dual-LAN terminal server products are shipped with
the following items:
•1 CN2600 series Terminal Server
•Power cord (AC models only)*
•Document and & Software CD-ROM
•Quick Installation Guide (this guide)
•1 DB9 serial cable (CBL-RJ45F9-150)
•1 DB25 serial cable (CBL-RJ45M25-150)
* Power cords are available with US, Euro, UK, and JP plugs.
Optional Accessories
•CBL-RJ45M9-150: RJ45 (8-pin) to DB9 (male) cable, 150 cm
•CBL-RJ45F9-150: RJ45 (8-pin) to DB25 (female) cable, 150
cm
•CBL-RJ45M25-150: RJ45 (8-pin) to DB25 (male) cable, 150
cm
•CBL-RJ45F25-150: RJ45 (8-pin) to DB25 (female) cable, 150
cm
NOTE
Notify your sales representative if any of the above items
are missing or damaged.
4. Hardware Introduction
NOTE
The wide temperature model does not support the LCM
Display panel
or push buttons. The LCM description
below
applies only to standard temperature models.
Front Panel
LED
Color
Description
Reset None Press the Reset button for 5 seconds to load
factory defaults. The CN2600 will beep twice
when the configuration has been reset.
Ready
Red
Used for configuring the IP address and other
parameters.
Green
Lights up when the CN2600 system is ready.
Serial Tx
Green
Flashes to indicate serial port transmission.
Serial Rx
Yellow
Flashes to indicate serial port reception.
Rear Panel
Connector
Function
AC Power
Input
Automatic detection of 100-240V, 47-63 Hz AC
power supply.
Power On/Off
Switch
I indicates power on; O indicates power off.
RS-232
Console Port
One RJ45 connector for console terminal
connection.
LAN1
Auto detecting 10/100 Mbps port.
LAN2
Auto detecting 10/100 Mbps port.
Serial Ports 8 or 16 RJ45 or DB9 connectors for DCE (modem)
connections.
LCM Display
We recommend using the LCM display and four push buttons to
configure the IP address for the first time.
Basic Operation
If the CN2600 is working properly, the LCM panel will display a
green color. The red Ready LED will also light up, indicating that
the CN2600 is receiving power. After the red Ready LED turns to
green, you will see a display similar to the following: (Example)
C
N
2
6
1
0
-
1
6
_
3
1
9
2
.
1
6
8
.
1
2
7
.
2
5
4
CN2610-16: The CN2610’s name
03: The CN2610’s serial number
192.168.127.254: The CN2610’s IP address
There are four push buttons on the CN2600 nameplate. Going from
left to right, the buttons are:
Button
Name
Action
MENU menu Activates the main menu, or returns to an
upper level.
up
cursor
Scrolls up through a list of items shown on the
LCM panel’s second line.

– 4 – – 5 – – 6 –
www.moxa.com/support
The Americas:
[phone] (toll-free: 1-888-669-2872)
Europe:
[phone]
Asia-Pacific:
[phone]
China:
[phone] (toll-free: 800-820-5036)
2010 Moxa Inc., All Rights Reserved
down
cursor
Scrolls down through a list of items shown on
the LCM panel’s second line.
SEL select Selects the option listed on the LCM panel’s
second line.
The buttons are manipulated in a manner similar to the way a
modern cellular phone operates. As you move through the various
functions and setting options, note that the top line shows the
current menu or submenu name, and the bottom line shows the
submenu name or menu item that is activated by pressing the SEL
button.
Refer to CN2600 series User’s Manual for more details.
5. Hardware Installation
1. Installing the CN2600
Open the package, and attach the CN2600 to a desktop, or
fasten it to the rack cabinet.
2. Wiring Requirements
A. Use separate paths to route wiring for power and devices. If
power wiring and device wiring paths must cross, make sure
the wires are perpendicular at the intersection point.
B. NOTE: Do not run signal or communication wiring and
power wiring in the same wire conduit. To avoid interference,
wires with different signal characteristics should be routed
separately.
C. Where necessary, we strongly advised that you label wiring
to all devices in the system.
3. Connecting Power
AC: Connect the CN2600 100-240 VAC power line with its AC
connector. If the power is properly supplied, the “Ready” LED
will show a solid red color until the system is ready, at which
time the “Ready” LED will change to a green color.
If the power is properly supplied, the “Ready” LED will show a
solid red color until the system is ready, at which time the
“Ready” LED will change to a green color.
4. Connecting to the Network
Connect one end of the Ethernet cable to the CN2600 10/100M
Ethernet port and the other end of the cable to the Ethernet
network. There are 2 LED indicators located on the top left and
right corners of the Ethernet connector. If the cable is properly
connected, the CN2600 will indicate a valid connection to the
Ethernet in the following ways:
The top right corner LED indicator maintains a solid
green color when the cable is properly connected to a
100 Mbps Ethernet network.
The top left corner LED indicator maintains a solid
orange color when the cable is properly connected to a
10 Mbps Ethernet network.
5. Connecting to a Serial Device
Connect the serial data cable between the CN2600 and the serial
device.
6. Connecting to a Console
A console is a combination of keyboard and monitor, and is used to
configure settings and to monitor the status of your system. If you
do not have a network environment, use a terminal, a PC running
UNIX, or a PC with terminal emulation software (e.g.,
HyperTerminal in Windows; PComm by Moxa). Use an
RJ45-to-DB25 or RJ45-to-DB9 cable to connect the terminal to the
console socket. Refer to the CN2600 User’s Manual for more
details.
6. Software Installation
Entering the Console Utility
Console Utility is the main application needed to set up the
server/port configuration, and to execute utilities such as ping,
diagnosis, monitor, and upgrade. There are two ways to enter the
Console Utility. One is to use terminal emulation through a console
terminal, and the other is to telnet from a network terminal.
Refer to the CN2600 User’s Manual for more details.
7. Pin Assignments and Cable Wiring
10/100BaseTX Port Pinouts
Console Port Pinouts
Pin
Signal
1
Tx+
2 Tx-
3
Rx+
6
Rx-
Pin
RS-232
1
DSR (in)
2
RTS (out)
3
GND
4
TxD (out)
5
RxD (in)
6
DCD (in)
7
CTS (in)
8
DTR (out)
RJ45 RS-232/422/485 Port
PIN
RS-232
RS-422/485 (4W)
RS-384 (2W)
1
DSR (in)
---
---
2
RTS (out)
TxD+
---
3
GND
GND
GND
4
TxD (out)
TxD-
---
5
RxD (in)
RxD+
Data+
6
DcD (in)
RxD-
Data-
7
CTS (in)
---
---
8
DTR (out)
---
---
DB9 (male) RS-232/422/485 Port
PIN
RS-232
RS-422/485 (4W)
RS-485 (2W)
1
DCD
TxD-(A)
---
2
RxD
TxD+(B)
---
3
TxD
RxD+(B)
Data+(B)
4
DTR
RxD-(A)
Data-(A)
5
GND
GND
GND
6
DSR
---
---
7
RTS
---
---
8
CTS
---
---
9
---
---
10/100BaseTX Cable Wiring
8. Environmental Specifications
Power requirements
Power
Input
100 to 240 VAC, 47 to 63 Hz
Power Consumption
235 mA for 100V, 145 mA for 240V
Operating temperature
Standard Models: 0 to 60°C (32 to 140°F)
Wide Temp. Models:
-40 to 75°C (-40 to
167°F)
Storage temperature
-40 to 75°C (-40 to 167°F), 5 to 95% RH
Dimensions (W×D×H)
198 × 45 × 440 mm
(7.8 × 1.77 × 17.3 in)
Surge protection
15 KV ESD for serial ports

– 4 – – 5 – – 6 –
www.moxa.com/support
The Americas:
[phone] (toll-free: 1-888-669-2872)
Europe:
[phone]
Asia-Pacific:
[phone]
China:
[phone] (toll-free: 800-820-5036)
2010 Moxa Inc., All Rights Reserved
Magnetic isolation
1.5 KV for Ethernet ports
Power line protection
1 KV Burst (EFT), EN61000-4-4
2 KV Surge, EN61000
-4-5
Regulatory approvals
EMC: CE: EN55022 Class A/EN55024
FCC: FCC part 15 subpart B, Class A
Safety:
UL: UL60950
TUV: EN60950