Moxa Technologies AirWorks AWK-1137C User manual

AirWorks AWK-1137C User’s Manual
Version 4.0, May 2019
www.moxa.com/product
© 2019 Moxa Inc. All rights reserved.

AirWorks AWK-1137C User’s Manual
The software described in this manual is furnished under a license agreement and may be used only in accordance with
the terms of that agreement.
Copyright Notice
© 2019 Moxa Inc. All rights reserved.
Trademarks
The MOXA logo is a registered trademark of Moxa Inc.
All other trademarks or registered marks in this manual belong to their respective manufacturers.
Disclaimer
Information in this document is subject to change without notice and does not represent a commitment on the part of
Moxa.
Moxa provides this document as is, without warranty of any kind, either expressed or implied, including, but not limited
to, its particular purpose. Moxa reserves the right to make improvements and/or changes to this manual, or to the
products and/or the programs described in this manual, at any time.
Information provided in this manual is intended to be accurate and reliable. However, Moxa assumes no responsibility for
its use, or for any infringements on the rights of third parties that may result from its use.
This product might include unintentional technical or typographical errors. Changes are periodically made to the
information herein to correct such errors, and these changes are incorporated into new editions of the publication.
Technical Support Contact Information
www.moxa.com/support
Moxa Americas
Toll
-free: 1-888-669-2872
Tel:
[phone]
Fax:
[phone]
Moxa China (Shanghai office)
Toll
-free: 800-820-5036
Tel:
[phone]
Fax:
[phone]
Moxa Europe
Tel:
[phone]
Fax: [phone]
Moxa Asia
-Pacific
Tel:
[phone]
Fax: [phone]
Moxa India
Tel:
[phone]
Fax:
[phone]

Table of Contents
1. Introduction...................................................................................................................................... 1-1
Overview ...........................................................................................................................................1-2
Package Checklist ...............................................................................................................................1-2
Product Features ................................................................................................................................1-2
Functional Design ............................................................................................................................... 1-3
LED Indicators ............................................................................................................................1-3
Beeper.......................................................................................................................................1-4
Reset Button...............................................................................................................................1-4
2. Getting Started.................................................................................................................................. 2-1
First-time Installation and Configuration ................................................................................................2-2
Testing the Communication..................................................................................................................2-3
Function Map .....................................................................................................................................2-5
3. Web Console Configuration ............................................................................................................... 3-1
Web Browser Configuration..................................................................................................................3-2
Overview ........................................................................................................................................... 3-4
Quick Setup .......................................................................................................................................3-5
General Setup ....................................................................................................................................3-7
System Information.....................................................................................................................3-7
Interface On/Off..........................................................................................................................3-8
Network Settings.........................................................................................................................3-8
System Time ............................................................................................................................ 3-11
Wireless LAN Setup........................................................................................................................... 3-12
AeroMag .................................................................................................................................. 3-13
Operation Mode......................................................................................................................... 3-15
Basic WLAN Setup ..................................................................................................................... 3-16
WLAN Security Settings.............................................................................................................. 3-18
Advanced WLAN Settings ........................................................................................................... 3-23
WLAN Certificate Settings (For EAP-TLS in Client/Slave Mode Only) ................................................. 3-26
Serial Port Settings ........................................................................................................................... 3-27
Operation Modes ....................................................................................................................... 3-27
Communication Parameters ........................................................................................................ 3-44
Data Buffering/Log .................................................................................................................... 3-45
Advanced Setup ............................................................................................................................... 3-46
Using Virtual LAN ...................................................................................................................... 3-46
Configuring Virtual LAN .............................................................................................................. 3-47
DHCP Server (For Client-Router Mode Only) ................................................................................. 3-48
Packet Filters ............................................................................................................................ 3-50
Static Route (For Client-Router Mode Only) .................................................................................. 3-53
NAT Settings/Port Forwarding (For Client-Router Mode Only) .......................................................... 3-54
SNMP Agent.............................................................................................................................. 3-55
Link Fault Pass-through (For Client/Slave Mode Only) .................................................................... 3-57
Logs and Notifications ....................................................................................................................... 3-58
System Logs............................................................................................................................. 3-58
Syslog ..................................................................................................................................... 3-59
E-mail Notifications.................................................................................................................... 3-60
Trap ........................................................................................................................................ 3-61
Status ............................................................................................................................................. 3-62
Wireless LAN Status................................................................................................................... 3-62
Serial Status............................................................................................................................. 3-63
DHCP Client List (For Client-Router Mode Only)............................................................................. 3-64
System Logs............................................................................................................................. 3-65
System Status .......................................................................................................................... 3-65
Network Status ......................................................................................................................... 3-66
Maintenance .................................................................................................................................... 3-67
Console Settings ....................................................................................................................... 3-67
Ping......................................................................................................................................... 3-67
Firmware Upgrade..................................................................................................................... 3-68
Configuration Import and Export ................................................................................................. 3-68
Load Factory Default.................................................................................................................. 3-69
Account Settings ....................................................................................................................... 3-70
Change Password ...................................................................................................................... 3-71
Miscellaneous Settings ............................................................................................................... 3-72
Troubleshooting ........................................................................................................................ 3-72
Save Configuration ........................................................................................................................... 3-73
Restart............................................................................................................................................ 3-74
Logout............................................................................................................................................. 3-75
4. Software Installation and Configuration ........................................................................................... 4-1

Overview ...........................................................................................................................................4-2
Wireless Search Utility.........................................................................................................................4-2
Installing Wireless Search Utility ...................................................................................................4-2
Configuring Wireless Search Utility ................................................................................................4-5
5. Using Other Consoles ........................................................................................................................ 5-1
Configuration by Telnet and SSH Consoles .............................................................................................5-2
Configuration by Web Browser with HTTPS/SSL ......................................................................................5-2
Disabling Telnet and Browser Access.....................................................................................................5-3
Configuration by the RS-232 Console ....................................................................................................5-3
A. References ........................................................................................................................................ A-1
Beacon..............................................................................................................................................A-2
DTIM.................................................................................................................................................A-2
Fragment...........................................................................................................................................A-2
RTS Threshold....................................................................................................................................A-2
B. Supporting Information .................................................................................................................... B-1
Firmware Recovery .............................................................................................................................B-2
DoC (Declaration of Conformity)...........................................................................................................B-3
Federal Communication Commission Interference Statement ............................................................B-3
RED Compliance Statement ..........................................................................................................B-4

1
1. Introduction
The AWK-1137C industrial a/b/g/n high-speed Wi-Fi clients are ideal wireless solutions for hard-to-wire
applications that use mobile equipment connected over a TCP/IP network. The AWK-1137C’s standard models
can operate at temperatures ranging from 0 to 60°C and wide temperature models can operate in the range-40
to 75°C. The AWK-1137C is rugged enough to operate in harsh industrial environments.
The following topics are covered in this chapter:

Overview

Package Checklist

Product Features

Functional Design
LED Indicators
Beeper
Reset Button

AirWorks AWK-1137C Introduction
1-2
Overview
The AWK-1137C is 802.11n compliant to deliver speed, range, and reliability to support even the most
bandwidth-intensive applications. The 802.11n standard incorporates multiple technologies, including Spatial
Multiplexing MIMO (Multi-In, Multi-Out), 20 and 40 MHz channels, and dual bands (2.4 GHz and 5 GHz) to
provide high speed wireless communication, while still being able to communicate with legacy 802.11a/b/g
devices.
AWK-1137C is used to connect RS-232/422/485 serial devices or Ethernet devices to a wireless LAN. The
AWK-1137C is a best fit in industrial applications, such as machine built-in design and moving equipment or
parts, because of its compact size, 9-30 VDC power input, and dual isolation design.
The AWK's operating temperature ranges from 0 to 60°C for standard models and -40 to 75°C for wide
temperature models, and is rugged enough for all types of harsh industrial environments. Installation of the
AWK is easy using DIN-rail mounting, wall mounting, or distribution boxes, and with its wide operating
temperature range, IP30-rated housing with LED indicators, and DIN-rail/wall mounting, it is a convenient yet
reliable solution for all types of industrial wireless applications.
Package Checklist
Before you install the AWK-1137C, verify that the package contains the following items. If any of these items
is missing or damaged, please contact your customer service representative for assistance.
•1 AWK-1137C wireless client
•2 2.4/5 GHz antennas:ANT-WDB-ARM-0202
•DIN-rail kit
•Quick installation guide (printed)
•Warranty card
NOTE
The above items
come with the standard AWK-1137C model, but the package contents may vary for
customized versions.
Product Features
•IEEE 802.11a/b/g/n compliant
•Advanced wireless security
64-bit and 128-bit WEP/WPA/WPA2
SSID Hiding/IEEE 802.1X/RADIUS
Packet access control & filtering
•Turbo Roaming enables rapid handover
•Wide -40 to 75°C operating temperature range (-T model)
•DIN-rail or wall mounting
•IP30 protected high-strength metal housing
The latest specifications for Moxa’s products can be found at https://www.moxa.com.

AirWorks AWK-1137C Introduction
1-3
ATTENTION
•
The AWK-1137C is NOT a portable mobile d
evice and should be located at least 20 cm away from the human
body.
•
The AWK-1137C is NOT designed for the general public. A well-trained technician should be enlisted to
ensure safe deployment of AWK-1137C units, and to establish a wireless network.
Patent http://www.moxa.com/doc/operations/Moxa_Patent_Marking.pdf
Functional Design
LED Indicators
The LEDs located both on the front and side panel of the AWK-1137C provide a quick and easy means of
determining the current operational status and wireless settings.
The SYS LED indicates system failures and user-configured events. If the AWK-1137C cannot retrieve the IP
address from a DHCP server, the SYS LED will blink at one-second intervals.
The following table summarizes how to read the device’s wireless settings from the LED displays. More
information is available in Chapter 3 in the “Basic WLAN Setup” section.
LED Color State Description
SYS Green On System start up complete and the system is in
operation
Blinking +
Beeps (at 1-sec intervals)
Device has been located by the Wireless Search
Utility
Red On System is booting or a system booting error has
occurred
Blinking (at 0.5-sec intervals) IP address conflict
Blinking (at 1-sec intervals)
Cannot obtain an IP address from DHCP server
WLAN Green On
(RSSI > 35)
WLAN interface has connected
Blinking Data communication via WLAN
Amber On WLAN interface has connected
Blinking Data communication via WLAN

AirWorks AWK-1137C Introduction
1-4
LAN 1 Green On Ethernet LAN 1 interface has connected
Off Data communication via Ethernet LAN 1
LAN 2 Green On Ethernet LAN 2 interface has connected
Off Data communication via Ethernet LAN 2
Serial Amber Blinking Data Transmission via serial data port
ATTENTION
•When firmware upgrade fails, the LEDs for SYS (Red), WLAN (Amber), LAN1 (Amber
) and LAN2
(Amber)will light up simultaneously.
•When the system fails to boot, the LEDs for SYS (Red) will light up along with the LAN 1 and
LAN 2
(if there is data traffic passing through the Ethernet interfaces). This may be due to improper
operation or issues, such as an unexpected shutdown while updating the firmware. To recover the
firmware, refer to the “Firmware Recovery” section in Appendix B.
Beeper
The beeper emits two short beeps when the system is ready.
Reset Button
The RESET button is located on the side panel of the AWK-1137C. You can reboot the AWK-1137C or reset it
to factory default settings by pressing the RESET button with a pointed object such as an unfolded paper clip.
•System reboot: Hold the RESET button down for under 5 seconds and then release.
•Reset to factory default: Hold the RESET button down for over 5 seconds until the STATE LED starts
blinking green. Release the button to reset the AWK-1137C.

2
2. Getting Started
This chapter explains how to install Moxa’s AirWorks AWK-1137C for the first time, and quickly set up your
wireless network and test whether the connection is running well. The Function Map discussed in the third
section provides a convenient means of determining which functions you need to use.
The following topics are covered in this chapter:

First-time Installation and Configuration

Testing the Communication

Function Map

AirWorks AWK-1137C Getting Started
2-2
First-time Installation and Configuration
Before installing the AWK-1137C, make sure that all items in the Package Checklist are in the box. You will need
access to a notebook computer or PC equipped with an Ethernet port. The AWK-1137C has a default IP address
that must be used when connecting to the device for the first time.
•Step 1: Connect a power source.
The AWK-1137C can be powered by a DC power input.
•Step 2: Connect the AWK-1137C to a notebook or PC.
Since the AWK-1137C supports MDI/MDI-X auto-sensing, you can use either a straight-through cable or
crossover cable to connect the AWK-1137C to a computer. The LED indicator on the AWK-1137C’s LAN port
will light up when a connection is established.
•Step 3: Set up the computer’s IP address.
Choose an IP address on the same subnet as the AWK-1137C. Since the AWK-1137C’s default IP address
is 192.168.127.253, and the subnet mask is 255.255.255.0, you should set the IP address of the
computer to 192.168.127.xxx.
NOTE
After you select
Maintenance Load Factory Default and click the Submit button, the AWK-
1137C will be
reset to
factory default settings and the IP address will be reset to 192.168.127.253.
•Step 4: Use the web-based manager to configure the AWK-1137C
Open your computer’s web browser and type http://192.168.127.253 in the address field to access the
homepage of the web-based Network Manager. Before the homepage opens, you will need to enter the
Username and Password as shown in the following figure. For first-time configuration, enter the default
username and password and then click on the Login button.

AirWorks AWK-1137C Getting Started
2-3
NOTE
Default user name and password:
User Name: admin
Password: moxa
We strongly
recommend changing the default password to ensure higher level of security. To do so, select
Maintenance
Password, and then follow the on-screen instructions to change the password.
NOTE
After you click
Submit to apply changes, the web page will refresh and a (Updated) status with a blinking
reminder
on the upper-right corner of the web page is displayed.
To activate the changes click
Restart and then Save and Restart after you change the settings. About 30
seconds are needed for the AWK
-1137C to complete the reboot procedure.
•Step 5: Select the AWK-1137C operation mode.
By default, the AWK-1137C’s operation mode is set to client. Detailed information about configuring the
AWK-1137C’s operation can be found in Chapter 3.
•Step 6: Test communications.
In the following sections we describe two test methods that can be used to ensure that a network
connection has been established.
Testing the Communication
After setting up the AWK-1137C for the first time, you can perform a simple test to make sure that the AWK can
establish a wireless connection with an AP and is functioning properly.
In this example, an AWK-1137C is configured as a client on the wireless network.

AirWorks AWK-1137C Getting Started
2-4
Testing Network Connectivity on AWK-1137C
Connect an AWK-3131A (or another access point) in AP mode to Notebook A. Connect an AWK-1137C to
Notebook B. Configure the AWK-1137C and AWK-1137C with the same SSID and set their IP addresses as
shown in the following figure:
After configuring the WLAN card, establish a wireless connection with the AWK-1137C and open a DOS window
on Notebook B. At the prompt, type
ping <IP address of notebook A>
and then press Enter (see the figure below). A “Reply from IP address …” response means the communication
was successful. A “Request timed out.” response means the communication failed. In this case, recheck the
configuration to make sure the connections are correct.

AirWorks AWK-1137C Getting Started
2-5
Function Map
General Setup for administering the
AWK-1137C
Essential settings related to establishing
a wireless network
Advanced features to support additional network
management and secure wired and wireless
communication
NOTE: These advanced functions are all optional.
Quick overview of the AWK-1137C’s
status

AirWorks AWK-1137C Getting Started
2-6
Application-oriented device
management functions to set up
events, traps, and reactions via
relay warning, e-mail, and SNMP
notification
NOTE: These functions are all
optional.
Current status information for monitoring
wired/ wireless network performance,
advanced services, and device management
functions.
Functions for maintaining the AWK-1137C,
and for diagnosing the network.
On-demand functions to support the
web-based console management
operation.

3
3. Web Console Configuration
In this chapter, we explain all aspects of web-based console configuration. Moxa’s easy-to-use management
functions help you set up your AWK-1137C and make it easy to establish and maintain your wireless network.
The following topics are covered in this chapter:

Web Browser Configuration

Overview

Quick Setup

General Setup
System Information
Interface On/Off
Network Settings
System Time

Wireless LAN Setup
AeroMag
Operation Mode
Basic WLAN Setup
WLAN Security Settings
Advanced WLAN Settings
WLAN Certificate Settings (For EAP-TLS in
Client/Slave Mode Only)

Serial Port Settings
Communication Parameters
Data Buffering/Log

Advanced Setup
Using Virtual LAN
Configuring Virtual LAN
DHCP Server (For Client-Router Mode Only)
Packet Filters
Static Route (For Client-Router Mode Only)
NAT Settings/Port Forwarding (For
Client-Router Mode Only)
SNMP Agent
Link Fault Pass-through (For Client/
Slave Mode
Only)

Logs and Notifications
System Logs
Syslog
E-mail Notifications
Trap

Status
Wireless LAN Status
Serial Status
DHCP Client List (For Client-Router
Mode Only)
System Logs
System Status
Network Status

Maintenance
Console Settings
Ping
Firmware Upgrade
Configuration Import and Export
Load Factory Default
Account Settings
Change Password
Miscellaneous Settings
Troubleshooting

Save Configuration

Restart

Logout

AirWorks AWK-1137C Web Console Configuration
3-2
Web Browser Configuration
Moxa AWK-1137C’s web browser interface provides a convenient way to modify its configuration and access
the built-in monitoring and network administration functions. The recommended web browser is Microsoft®
Internet Explorer 7.0 or 8.0 with JVM (Java Virtual Machine) installed.
NOTE
To use the AWK
-
1137C’s management and monitoring functions from a PC host connected to the same LAN as
the AWK
-1137C, you must make sure that the PC host and the AWK-1137C are on the same logical subnet.
Similarly, if the AWK
-
1137C is configured for other VLAN settings, you must make sure your PC host is on the
management VLAN.
The Moxa AWK
-1137C’s default IP is 192.168.127.253.
Follow these steps to access the AWK-1137C’s web-based console management interface.
1. Open your web browser and type AWK-1137C’s IP address in the address field and press Enter.
2. The Web Console Login page will open. Enter the password (default Username = admin; Password = moxa)
and then click Login to continue.
3. You may need to wait a few moments for the web page to download to your computer. Note that the Model
name and IP address of your AWK-1137C are both shown in the title bar of the web page. This information
can be used to help you identify multiple AWK-1137C units.
If an incorrect username or password is entered, a warning message is displayed. The system will lock the
user account based on the settings configured in the Maintenance->Account Settings page. The default
retry count is 5 times and the default lockout time is 600 seconds. Once an account is locked, the user will
have to wait out the duration of the lockout period before retrying.

AirWorks AWK-1137C Web Console Configuration
3-3
For additional details, see Account Settings under Maintenance.
4. Use the Quick Setup function on the homepage to quickly set up the AWK or click on Overview to see the
basic device status. The Import/Export function helps you back up the system or to perform a system
recovery from an existing backup.
5. Use the menu tree on the left side of the window to open the function pages to access the AWK-1137C’s
functions.

AirWorks AWK-1137C Web Console Configuration
3-4
To go back to the main page, click on the Home link.
An overview of the menu is available at Chapter 2, Function Map. The AWK-1137C management functions are
described in detail in the following sections.
NOTE
The model name of the AWK
-1137C is shown as AWK-1137C-XX, where XX indicates the country code. The
country code indicates the AWK
-1137C version and which frequencies it uses. We use AWK-1137C-US as
an
exa
mple in the following figures.
The country code and model name that appears on your computer screen may
be different than the one shown here.
Overview
The Overview page summarizes the AWK-1137C’s current status. The information is categorized into several
groups: System Information, Device Information and 802.11 Information.

AirWorks AWK-1137C Web Console Configuration
3-5
Click on the SSID link for detailed 802.11 Information as shown in the following figure:
NOTE
The
802.11 Information that is displayed may be different for different operation modes. For example,
Current BSSID
, Signal strength, and SNR are only available under Client/Client-Router/Slave operation
modes.
Quick Setup
The AWK-1137C provides a quick setup wizard to help you configure the basic settings, including wireless and
serial (for devices that support a serial console) settings. Before you enter the setup wizard, you will see a list
of the tasks as shown below:
Choose Default Settings to see the default parameters or the Saved Settings to view the current
parameters.

AirWorks AWK-1137C Web Console Configuration
3-6
Once you enter the setup, links to each step in the process are displayed at the top of the page. You can either
click Next to go to the next step or click directly on the links at the top of the page to go to a specific step.
NOTE
You can move your
cursor on the question mark symbol to view a tooltip for
additional details regarding the
corresponding field.
In the last step of the setup process, “4. Review Settings”, you will be able to view the basic Wi-Fi parameters
that you configured in the previous steps.