Mr. steam Isteam controls Instruction manual

.steam

Feel Good Inc.

iSteam®Contro s

Installation, Operation & Maintenance Manual

General Information

As you follow these instructions, you

will notice warning and caution symbols.

This blocked information is important for

the safe and efficient installation and

operation of this generator. These are

types of potential hazards that may occur

during installation and operation:

states a hazard may cause

serious injury or death if precautions are

not followed.

signals a situation where

minor injury or product damage may occur

if you do not follow instructions.

IMPORTANT NOTE:

This highlights information that is

especially relevant to a problem-free

installation.

Box Contents:

• iSteam®Control

• Control Cable (30 ft.)

• Steamhead

• Tube of Silicone Sealant

• Owner’s Manual

• Rough-In Box

• Optional Surface

Mount Gasket

Table of Contents:

Genera Information......................................2

Box Content..................................................2

Dimensiona Information...............................3

Before Insta ing ............................................3

Locating the Contro .....................................4

Insta ation with Rough-In Box...................4-5

Insta ation without Rough-In Box ................5

iSteam®Insta ation ....................................6-7

Operating Instructions

Stand-By, Start, Dashboard, Set Timer

............8

Set Temperature, User Preferences

.................9

Accessories: AudioWizard™, AromaSteam,

ChromaSteam®

...........................................9

Optiona Accessories....................................10

Settings > Set Day/Time > Disp ay

.............10

Settings > Passcode

..................................11

Care Tips, Safety & Operating Info ............11

Warranty......................................................11

WARNING

CAUTION

steam

Controls

__________________________________________________________________

10:06 AM

ACCESSORIES SETTINGS

STAR T

Before Installing

o avoid unintentional steambath opera-

tion, do not locate the control where other controls, acces-

sories, shower heads, valves, body sprays or similar within

the shower could cause confusion or interfere with the

Mr.Steam control’s intended use and function.

• Do not use the iSteam control without reading and under-

standing the Mr.Steam steam generator Installation and

Operation Manual (PN 100472).

• The peel and stick warning sticker, provided in the

Steambath Generator Installation, Operation and

Maintenance Manual, must be read and permanently

affixed in a conspicuous location near the steam room.

Failure to read and affix this warning sticker in a

conspicuous location may result in serious injury or death.

• If an iSteam control is installed outside the steam room a

Remote Temperature Probe (PN iMSTS) must be installed

inside the steam room per installation instructions

supplied with the Remote Temperature Probe. Failure to

install according to instructions will result in an inopera-

tive control and overheating of the steam room.

WARNING

Do not route iSteam control wiring inside

conduit together with power lines or close to hot water

or steam piping. Doing so may result in an inoperative or

hazardous installation. Do not alter or modify any

Mr. Steam products including the steam generator or

iSteam control. Doing so may result in an inoperative or

hazardous installation and will void the warranty.

IMPORTANT NOTES:

• The iSteam Control is designed to be flush mounted.

However, the control may be surface mounted when

conditions permit. Consult a MrSteam Customer Service

or Technical Service representative to determine if the

iSteam control can be surface mounted.

• Turn power to the steam generator OFF before connecting

the control to the generator. Failure to turn the power off

will result in an inoperable control.

• Do not operate the iSteam control with other than a Mr.Steam

iSteam compatible steam generator. Mr.Steam residential steam

generators with serial numbers lower than 930030, or any other

brand of steam generator are not to be operated with iSteam

controls. Doing so may result in an inoperative installation. If

your generator’s serial number is lower than 930030 contact

Mr.Steam Technical Service for upgrade options and compo-

nents to enable your steam generator to function with iSteam.

• This document contains important safety, operation and mainte-

nance information. Leave this document with the homeowner.

Do not discard this document.

• Discontinue use of the steam generator or control if the steam

generator is damaged or otherwise not functioning properly.

Doing so may result in an inoperative or hazardous installation

• Refer to the Steambath Generator Installation, Operation and

Maintenance Manual PN 100472 for locating and installing the

steamhead.

CAUTION

65⁄16”

43⁄4”

13⁄8”

Control

Pigtail (8”)

Wall location

for flush mount

Wall location for

optional surface mount

ID Tag

Red Cap Audio Pigtail

(71⁄4”)

Dimensional Information

Not Actual Size

REDUCE THE RISK OF OVERHEATING AND SCALDING

EXIT IMMEDIATELY IF UNCOMFORTABLE, DIZZY OR SLEE Y.

STAYING TOO LONG IN A HEATED AREA IS CA ABLE OF CAUSING OVERHEATING.

2. CHILDREN UNDER THE AGE OF 16 SHOULD NOT USE THE STEAM BATH.

3. CHECK WITH A DOCTOR BEFORE USE IF REGNANT, DIABETIC, IN OOR

HEALTH OR UNDER MEDICAL CARE.

4. BREATHING HEATED AIR IN CONJUNCTION WITH CONSUM TION OF ALCOHOL,

DRUGS, OR MEDICATION IS CA ABLE OF CAUSING UNCONSCIOUSNESS.

5. DO NOT CONTACT STEAM HEAD OR STEAM AT THE STEAM HEAD.

REDUCE THE RISK OF SLIPPING AND FALL INJURY

USE CARE WHEN ENTERING OR EXITING THE STEAM ROOM. FLOOR MAY BE SLI ERY.

NOTE: FOR ADDITIONAL SAFETY CONSIDERATIONS SEE OWNER’S MANUAL

.steam®43-20 34th Street , Long Island City NY 11101 1 800 76 STEAM www.mrsteam.com UR100378 6.4/08

WARNING

steam

Controls

__________________________________________________________________

Locating the Control

Determine the desired installation location of the control. The iSteam

controls are designed to be installed inside or outside the steam room

as a matter of personal preference. If the control is installed inside

the steam room:

• Locate the control 4-5 feet above the floor near the bather seating area.

• The control features an integral temperature sensor. Locate the

control in a location representative of the desired steambathing

temperatures. Do not locate the control above or near the steam

head or direct steam emissions.

• Locate the control on a vertical wall.

• The control and AudioWizard™cables are 30 feet. Insure that the control,

steam generator and optional AudioWizard are located accordingly.

IMPORTANT NOTES:

• A 60 foot cable is NOT available for iSteam or AudioWizard.

•

If the control is installed outside the steam room a Remote Temperature

Probe Part Number iMSTS must be installed inside the steam room.

Refer to the iMSTS installation manual before installing the control.

• Insure Mr.Steam steam generator is iSteam compatible and has

a serial number 930030 or higher.

Installation with Optional Rough In Box

A rough-in box is supplied with iSteam for new construction.

The rough-in box will allow precise location of the iSteam®control and

provide a secure and easily identifiable place for the cables while the

steam room is being constructed.

STEP 1

Take the rough-in box out of the package. Remove the two screws (1a )

and place them in the top and bottom wings of the rough-in box (1b).

STEP 2

Select a KNOCK-OUT (2a) to route the control cable into the box. Use a

second KNOCK-OUT if the optional AudioWizard is used.

STEP 3

Line up the two TABS (3a) on the right of the box against a stud. These

TABS help locate the box to sit PROUD of the stud (3b).

STEP 4

SCREW (4a) the two supplied screws into the stud.

STEP 5

Route the CONTROL CABLE (5a) through the back of the rough-in box and

clip it under one of the TABS (5b) that previously held the screws. The two

ends of the control cable are the same.

steam

Controls

__________________________________________________________________

Installation with Optional Rough In Box (cont.)

IMPORTANT NOTE: Be careful not to strain, staple, pinch or

otherwise damage the cables. Route cables as required to

permit replacement. Do not route cables inside conduit together

with power lines or close to hot water or steam piping.

STEP 6

When used, route the AudioWizard™Cable (6a) through a

second knockout in the rough-in box and clip (6b). The two ends

of the AudioWizard cable are the same. See the AudioWizard

Installation Operation & Maintenance Manual (PUR 100478) for

complete AudioWizard Installation instructions.

STEP 7

Use the rough-in box as a guide to cut out the

(39⁄16” x 51⁄4”) opening in the wall.

Finish the iSteam®installation using the instructions on page 6.

Installation without Rough In Box

STEP 1

Make a 39⁄16” x 51⁄4” cut-out in the desired location.

STEP 2

Route the control cable from the wall cutout to the steam

generator. Connect one end of the cable to the steam generator

connector. The two ends of the control cable are the same.

STEP 2

When used, route the AudioWizard™Cable from the wall

cut-out to the AudioWizard. The two ends of the AudioWizard

cable are the same. See the AudioWizard Installation Operation

& Maintenance Manual (PUR 100478) for complete AudioWizard

Installation instructions.

IMPORTANT NOTE: Be careful not to strain, staple, pinch or

otherwise damage the control cable. Route cable as required to

permit replacement. Do not route cable inside conduit together

with power lines or close to hot water or steam piping.

Finish the iSteam®installation using the instructions on page 6.

Rough-In box used

as a guide to cut

out the opening.

⁄

”

⁄

”

Control Pigtail

Control

Cable

AudioWizard Pigtail

Optional

AudioWizard

Cable

Steam

Generator

8:19 AM

ACCESSORIES SETTINGS

START

8:19 AM

ACCESSORIES

SETTINGS

STEP 1

PLUG the 30' control cable into the iSteam

control pigtail (1a). The iSteam pigtail is the

longer cable with the ID Tag.

If the optional AudioWizard™is used, remove

the Red Cap from the AudioWizard pigtail (1b)

and plug it into the AudioWizard cable.

steam

Controls

__________________________________________________________________

Installation Instructions for iSteam

See the AudioWizard Installation Operation and

Maintenance Manual (PUR 100478) for complete

AudioWizard Installation instructions.

Turn the generator on and test the control (and

AudioWizard when installed) to verify correct con-

nection. With proper function, proceed to Step 2.

For illustrative purposes only.

CAUTION

Do not force or twist

cable ends together. Forcing or

twisting cable ends may damage

the connectors.

steam

Controls

__________________________________________________________________

STEP 2

Peel the double stick adhesive off the back of the

iSteam control (2a). Apply a bead of silicone around

the rear of the iSteam control to create a moisture seal

(2b). Carefully feed the cables into the rough-in box

and secure the control to the wall. Care must be taken

to not pinch the cables. Ensure the control is level.

IMPORTANT NOTE:

The iSteam control display

reads in one direction only. The control must be in-

stalled with the arrow on the Peel-Off screen protector

facing up. If the Peel-Off screen protector has been re-

moved see the drawing in Step 2b for the proper ori-

entation.

NOTE: The silicone supplied by Mr. Steam®can be

used to meet a variety of sealing and gasketing. It

cures to silicone rubber and adheres to glass, wood,

metal, porcelain, ceramic tile, painted surfaces, many

plastics and rubber. Surfaces must be clean and dry.

Apply thin layer of product. Fit together and support if

necessary. Allow excess material to cure, then trim

with a sharp blade. Sealant “skins” in 5 minutes, dries

to touch in 1 hour. Fully cures and bonds in 24 hrs.

IMPORTANT NOTE: Do not apply excessive amounts

of silicone. Do not apply silicone to any other parts of

the control including the adhesive gasket. Insure the

mounting surface is clean and dry as required for

good adhesion. Hold the control with the arrow on the

screen protector facing up and press the control

against the wall until the adhesive sticks and holds

firmly. Control may have to be supported or secured

until the silicone has cured for 24 hours.

8:19 AM

ACCESSORIES SETTINGS

START

8:19 AM

ACCESSORIES

SETTINGS

Installation Instructions for iSteam

(cont.)

This

End

Before use, remove

and discard the peel-

off screen protector.

This

End

steam

Controls

__________________________________________________________________

8:19 AM

Monday

8:19 AM

ACCESSORIES SETTINGS

START

STOP

8:19 AM

20 min. 110˚ F

User 1 User 2

8:19 AM

HOME SAVECANCEL

STOP

SET TIMER USER 1

35 Minutes

Operating Instructions

Set the steambathing duration and tem-

perature according to personal preference, however it is

highly recommended to begin steambathing at a low

temperature setting to gauge comfort and safety levels.

Set the duration at 10 minutes max. to gauge comfort

and safety levels. This will allow the steam generator to

heat up and begin producing steam.

Stand By Screen

Touch anywhere on the display to wake up

the iSteam Control

Start Screen

Press the START button to turn the steam genera-

tor ON and to display the Dashboard screen.

Steam will begin to flow a few minutes after the

START button is pressed. The time required for

the steamroom to reach steambathing tempera-

tures depends on the steamroom construction

and steam generator specifications.

Dashboard Screen

The Dashboard displays key steam bathing

features and optional accessories in one conven-

ient screen. The key features include TIME,

TEMPERATURE and USER settings. The

optional accessories include the ChromaSteam®,

AromaSteam and AudioWizard™.

Set Timer Screen

Press the TIMER button on the Dashboard to

access the SET TIMER screen. Swipe your finger

from left to right to select the desired temperature

(1-60 minutes). Press CANCEL to return to the

Dashboard without changing the time. Press

HOME to return to the Dashboard, saving the time

for this steambath session only. Press SAVE to save

the time setting as the new default or as the se-

lected user setting. The control will turn off when

the steambath session times out. Then the START

screen will be displayed.

WARNING

AudioWizard

Touch to

wake up

Touch to Start

System Settings

(

.10 & 11)

Accessories

(

.9)

Temperature

(

.9)

Timer (

.8)

ChromaSteam

AromaSteam

(

.9)

User

Preferences

(

.9)

User Preset

Indicator

Press to

Stop Steam

Timer

(swipe area)

ChromaSteam

The ChromaSteam is an optional accessory that

activates colored lights in the steamroom. Press

the CHROMA button to turn it ON. Turn the

button OFF then back ON to select the desired

color. Press again to turn the lights OFF.

Accessories

AudioWizard

™

Press the MUSIC button to access the AudioWizard™screen.

Turn AudioWizard

ON/OFF

Previous Track

(Bluetooth®only

)

Play/Pause

(Bluetooth only

)

Next Track

(Bluetooth only

)

steam

Controls

__________________________________________________________________

Set Temperature Screen

Press the TEMPERATURE button on the Dashboard to

access the SET TEMPERATURE screen.

The control is preset and will display a temperature

setting of 110°F (default setting). Swipe your finger

from left to right to adjust the desired temperature

(80 - 120 F) in one degree increments.

Press CANCEL to return to the Dashboard without

changing the time. Press HOME to return to the

Dashboard, saving the time for this steambath session

only. Press SAVE to save the time setting as the new

default or as the selected user setting.

Changing the Temperature Units

(°F/°C)

Press the UNITS button in the lower right corner of

the SET TEMPERATURE screen to change from

Fahrenheit to Celsius. Press the SAVE button to ac-

cept the new value and exit.

Memory Feature

If the control is turned off manually before it times out

then the default settings of 20 minutes and 110°F will

be used the next time the control is turned on. If the

8:19 AM

HOME SAVE FCCANCEL

STOP

SET TEMPERATURE USER 1

99˚ F

˚F / ˚C TOGGLE

TEMP

control times out (not manually turned off) then the

previous user time and temperature settings will be

used when the steambath is used again.

User Preferences (User1 and User2 )

Press USER 1/USER 2 button. Enter the preferred

time and temperature settings and press SAVE.

iSteam®will automatically save the settings. To re-

call the user preferences press USER 1/USER 2 the

next time the steambath is used.

Temperature

(swipe area)

AromaSteam

The AromaSteam is optional accessory that

automatically infuses aromatic oils into the steam

flow. Press the AROMA button to turn it ON.

The AromaSteam turns OFF automatically when

the steam generator stops. Press the AROMA

button to turn it OFF during a steam session.

AUX

STOP

8:19 AM

MUSIC

See the AudioWizard™Manual for complete

operation information.

Increase Volume

Decrease Volume

Return to

Previous Screen

steam

Controls

__________________________________________________________________

8:19 AM

HOME SAVE 12CANCEL

Set Day/Time

6 AM

45 SUNDAY

2412

2% to 100%

DIM FULLY BRIGHT

80%

8:19 AM

HOME SAVECANCEL

DISPLAY SETTINGS

80%

Brightness

View when off

Screen Saver

CLOCK BLANK START

OFF ON

8:19 AM

SETTINGS

Set Time Passcode Lock

Display Reset

Press to change from

12 to 24 hr. clock

Page 10

Return to Page 11

previous screen

Settings Screen

The Setting Screen allows access to less frequently

used screens including the setting of DAY/TIME,

DISPLAY BRIGHTNESS, PASSCODE LOCK and

SYSTEM RESET.

Settings > Set Day/Time

Access the system SETTINGS screen by pressing the

button on the start screen. To set the TIME, press the

parameter (HOURS, MINUTES, AM/PM, DAY) to be ad-

justed. Use the UP/DOWN arrows to change. Press the

SAVE button to save the time. Press the CANCEL

button to exit without saving the changes. Press the

HOME button to return to the SETTINGS screen.

Settings > Display

To adjust the screen brightness swipe your finger as

shown. The “OFF” screen can display the clock, remain

blank until touched, or be the START screen by using

the buttons shown. A screen saver can be turned

ON/OFF using the button shown.

When ON, the display will

automatically dim after it

has been on for 1 hour.

8:19 AM

ACCESSORIES

ChromaSteam

AudioWizard

Optional Accessories Screen

Press the ACCESSORIES button on the START

screen to access the optional ChromaSteam®

and AudioWizard™accessories when a steam-

bath is not in session.

See page 9 for information on the

ChromaSteam and AudioWizard operation.

steam

Controls

__________________________________________________________________

Care Tips

Use only mild soap and water on a soft cloth to clean

the control. Do not use abrasive cleansers

Safety and Operating Information

Set the steambathing duration and tem-

perature according to personal preference, however it is

highly recommended to begin steambathing at a low

temperature setting to gauge comfort and safety levels.

Set the duration at 10 minutes max. to gauge comfort

and safety levels. This will allow the steam generator to

heat up and begin producing steam.

Do not use any iSteam®control without

reading and understanding the Mr.Steam®steam gener-

ator Installation and Operation Manual (PN 100472).

Failure to read and understand these instructions may

result in an inoperative or hazardous installation.

8:19 AM

HOME SAVECANCEL

PASSCODE LOCK

12345

CLEAR

Enter your Passcode

Passcode Lock

78910

0000

OFF ON

Settings > Passcode

The Passcode feature can help prevent unintentional use of

the steambath. Please refer to the steam generator

Installation, Operation and Maintenance manual (PN

100472) before using the steam bath. The Passcode feature

cannot insure unintentional use of the steambath.

Enter a 4 digit passcode using the keypad. Press the pass-

code lock button ON under the 4 digit code to turn the

passcode lock on. Press SAVE to store the passcode. The

next time the iSteam®control is turned on the user will be

prompted to enter the passcode. Press CANCEL to exit

without storing the passcode lock.

If you forget your passcode, power should be turned off at

the circuit breaker. After 1 minute turn the breaker back on.

The passcode lock will automatically be turned OFF.

CAUTION

WARNING

Warranty

To view or download the Mr. Steam®Control Warranty

and register your product go to

blog.mrsteam.com/wr

The peel and stick warning sticker, provided in the

Steambath Generator Installation, Operation and

Maintenance Manual, must be read and permanently

affixed in a conspicuous location near the steam room.

Failure to read and affix this warning sticker in a con-

spicuous location may result in serious injury or death.

If an iSteam control is installed outside the steam

room a Remote Temperature Probe (PN iMSTS) must

be installed inside the steam room per installation

instructions supplied with the Remote Temperature

Probe. Failure to install according to instructions will

result in an inoperative control and overheating of

the steam room.

steam

Feel Good Inc.

www.mrsteam.com

mr.steam®

Sussman-Automatic Corporation®I [email protected] I www.mrsteam.com

43-20 34th Street, Long Island City, NY 11101 I 9410 S. La Cienega Blvd. Inglewood CA 90301

1 800 76 STEAM FAX: 718 472 3256 I 1 800 72 STEAM FAX: 310 216 2944

2013 Sussman-Automatic Corporation I Mr.Steam and des., AromaFlo, AutoFlush, AutoSteam, Butler Package, ChromaSteam, Clean Steam...Every Time, Club Ther-

apy, Digital 1, Express Steam, From Bathroom to Spa, iSizing, iSteam, iSteam/Plus, Making Wellness a Way of Life, MusicTherapy, Spa Package, Steam Genie, Steam on

Demand, Steam@Home, iTempo, iTempo/Plus, SteamTherapy, Sussman, Valet Package, Virtual Spa System, Voice Genie and Voice Wizard are registered trademarks of

Sussman-Automatic Corporation. AudioWizard, A Lifetime of Pleasure, Home Wizard, iButler, iGenie, iSteamTV, iTempo, iTempo/Plus, MySteam, Smart Sizing, Steam in a

Box, SteamStart, SteamStop, The Intelligent Steambath are trademarks of Sussman-Automatic Corporation.

PUR

100477

REV

3.13