MRHANDSFREE BC6000 User manual

BC m
CZ SK
EST

Illustration I
Illustration II
1
3 x 4
2
4
5
8.1
8.2
7.1
7. Option1
8.Option 2
10
12
34
Illustration III
SM3
b
a
9.1
9.Option3
6

1
GB
PACKAGE CONTENTS
SEE ILLUSTRATION I
1. Speaker unit
2. Velcro for xation of the speaker unit
3. Set of screws for xation of the speaker unit – 4 pcs
4. Button unit
5. Double-sided tape for xation of the button unit
6. Microphone with mounting parts and double-sided tape
7. Cable set – Option 1 – For BC 6000m Quick Installation (Optional)
7.1. Adapter for connecting the speaker unit to the car via the cigarette lighter. It includes a changeable
fuse and cord.
7.2. Power cable for connecting the speaker unit to the power supply of the car, the ignition system
and for muting the radio (small mute cable). It includes a changeable fuse.
7.3. Contact clips for connecting the small mute cable to the car circuitries – 4 pcs.
8. Cable set – Option 2 – For BC 6000m Pro (Optional)
8.1. Mute box (ISO cable) with ISO sockets for radio connections.
9. Quick Reference Guide
INSTALLATION OF THE BC 6000m
The BC 6000m is available in 2 versions:
1. BC 6000m QUICK INSTALLATION
A. When you want to use the cigarette plug:
Connect the adapter for the cigarette lighter to the car and the other end of the cable to the speaker unit.
B. When you want to use the small mute cable:
SEE SEPARATE SHEET ‘INSTALLATION SCHEME’.
Immediately to the car’s electronic system via the small mute cable.
The wires of the small mute cable are listed in below table in column A and each wire should be
connected to the corresponding item listed in column B.

2
GB A B
Red wire The + voltage of the car’s power supply
Blue wire Ignition
Black wire The negative GND connection (-)
Brown wire Used for Car Radio Muting (CRM) and has to be connected to the car radio (Mute)
2. BC 6000m PRO: for professional installation with sound of carkit over the car speakers
SEE SEPARATE SHEET ‘INSTALLATION SCHEME’.
a. Connect the 6-pin plug and mono jack plug to the speaker unit.
b. Connect the yellow separate wire to the car radio (optional). (Used for Car Radio Muting (CRM) and
has to be connected to the car radio (Mute))
c. Connect the ISO plugs to the car and the radio (maybe you will need conversion leads, which are
not included)
SEE ILLUSTRATION III
The button unit (a) needs to be mounted on the dashboard.
The microphone (b) needs to be mounted close to the user’s head (30 cm is optimal) and directed towards
the mouth.
Installation tips:
- Make sure that the dashboard is clean and free of dust or grease before sticking the double-sided tape!
- Make sure that the unit is clean and free of dust or grease before sticking the double-sided tape!
- For optimal performance, the microphone should be located at a maximum distance of 50 cm from the
driver’s mouth.
- Please also carefully check the separate sheet that is included with this product.

3
GB
PARTS & FUNCTIONS
SEE ILLUSTRATION II
1. GREEN BUTTON
(Pairing / Make a call / Answer a call / Redial / answer a 2nd call / Switch between 2 phone calls /
Muting/un-muting the microphone)
- Pairing:
You are required to pair the BC 6000m with your mobile once before using it. Each BC 6000m has a default
PIN-code 0000 for pairing, which is stored in its internal memory.
→ Press and hold the Green button for 5 seconds until the LED indicators start ashing.
→ The carkit is now ready for pairing.
→ Make sure that the Bluetooth® function of your mobile phone is turned on and let your phone search for
Bluetooth® devices. (Refer to the manual of your mobile phone.)
→ Select BC 6000 out of the list with found devices on your mobile phone.
→ You may be asked to enter the PIN-code to complete pairing, enter 0000 and conrm it.
Attention!
• To ensure automatic reconnection between the phone and the BC 6000m, we recommend setting the BC
6000m as “Authorized” in the Bluetooth® menu of your phone! Please refer to the manual of your mobile
phone for more detailed information.
• If the Bluetooth® connection is not restored automatically after disconnection, press the (+) button for 5
seconds to restore the connection manually.
- Make a call:
o Using your mobile phone’s keypad
Enter and dial the number on the mobile phone as you normally do. Once the call has been set
up, the sound will be transmitted to your carkit automatically.
o Using voice dialing:
Press the Green button 1x and you will hear a tone that indicates that you can pronounce the desired
name (=’voice tag’). → Say the voice tag. → The phone will now play the voice tag and start dialing
the related phone number.
Note: Your mobile phone needs to support voice dialing.
- Answer a call: Press the Green button to answer a call.
- Redial: Press the Green button twice. → The phone will dial the last dialed number.
- Answer a 2nd call: When you receive a second call, press the Green button once to hold the rst call and
to answer the second call.

4
- Switch between 2 phone calls: When having 2 calls on the line, press and hold the Green button for 3
seconds to switch between these 2 phone calls.
Note: This function only works when your mobile phone service provider provides this service (check with
your network provider).
- Muting / Un-muting the microphone:
Press and hold the Green button for 3 seconds to mute the microphone. The white LED indicators will ash
5 times and you will hear ‘DONG-DONG’ tones.
Press the Green button again for 3 seconds to un-mute the microphone again.
Attention!
- When you receive a call, please always use the green button of the BC6000m (as described above)
instead of your mobile phone’s green button to answer the call.
If you do press the green button of your mobile phone, some phones (e.g. iPhone 3GS) will transmit the
conversation through the phone. In this case you need to perform extra actions to transfer the conversation
to the carkit (= Not handsfree calling).
- When you turn off the carkit, it can take about 20 to 40 seconds to break the connection with your mobile
phone. This is due to the fact that the BC6000m is capable of pairing with 8 different mobile phones and of
making a connection with 2 phones simultaneously. This last feature is called ‘Multipoint’ and is explained
in detail on the separate sheet ‘Multipoint Bluetooth’.
2. RED BUTTON
( End a call / Reject a call / Reject a 2nd call / End one of the 2 phone calls)
- End a call: Press the Red button to end the current call.
- Reject a call: Press the Red button to reject the call.
- Reject a 2nd call: When you receive a 2nd call, press and hold the Red button for 3 sec. to end the 2nd call.
- End one of the 2 phone calls: When having 2 calls on the line, press the Red button once to end the
current call and to switch to the other call.
3. (+) AND (-) VOLUME BUTTONS
Press (+) to increase the volume level. Press (-) to decrease the volume level.
GB

5
4. LED INDICATORS
Mode LED indicators
Red / Green Button LED indicators +/- Volume button
Pairing mode Flash Flash
Standby mode (connected) ON OFF
Standby mode (disconnected) OFF ON
Talk mode ON ON
Mute mode ON FLASH 5 times (In Mute mode, you will hear
‘DONG – DONG’ tones)
GUARANTEE
Mr Handsfree is a registered trademark of TE-Group NV.
The mr Handsfree brand stands for superior product quality and outstanding customer service. That is why mr
Handsfree warrants this product against all defects in material and workmanship for a period of two (2) years
from the date of original purchase of the product.
The conditions of this guarantee and the extent of responsibility of mr Handsfree under this guarantee can be
downloaded from our website: www.mrhandsfree.com
IMPORTANT NOTE FOR BLACKBERRY USERS!
If your Blackberry phone has an automatic echo suppression function, we advise you to switch off the echo
suppression function in our BC6000m to maintain optimal sound quality.
How?
Select ‘BC6000’ In your paired devices list --> Properties --> Echo Suppression --> OFF’
GB

Q.R.G./BC 6000m/02-12/V06