MSA RWB User manual

QUICK-FIT INSTALLATION GUIDE
REAR WHEEL BAG
Part No: RWB

1. Hold bag against spare wheel and
position straps behind wheel. The
straps cross over (See image on
opposite page), and attach to the
diagonal clips underneath the Rear
Wheel Bag.
2. Unbuckle “Anti-Drop Strap” and pass
under Spare Wheel Mount and back up
to top of Rear Wheel Bag and re-attach
to buckle.
3. Ensure bag is placed right at the top
of spare wheel and firmly tension Anti
Drop Strap. Firmly tension diagonal
straps.
4. When both diagonal straps are
tensioned, feed strap back through
safety tri-slide clip.
FITTING INSTRUCTIONS
Designed and Manufactured by
MSA 4X4 Accessories Pty Ltd
43 Harrington Street
Arundel, QLD 4214 Australia
Phone: [phone]
www.msa4x4.com.au
ABN: 50 150 429 566
Please refer to our website
for lifetime guarantee full
terms and conditions.
CONGRATULATIONS ON YOUR PURCHASE
OF AN MSA 4X4 QUALITY
REAR WHEEL BAG