MSA RWB User manual

QUICK-FIT INSTALLATION GUIDE
Rear Wheel Bag
PRODUCT CODE:
RWB
Anti-Drop Strap

Congratulations on your purchase
of an MSA 4X4 quality
Rear Wheel Bag!
Fitting instructions:
1. Hold bag against spare wheel and position straps behind wheel. The
straps cross over (See image on opposite page), and attach to the
diagonal clips underneath the Rear Wheel Bag.
2. Unbuckle “Anti-Drop Strap” and pass under Spare Wheel Mount and
back up to top of Rear Wheel Bag and re-attach to buckle.
3. Ensure bag is placed right at the top of spare wheel and firmly tension
Anti Drop Strap. Firmly tension diagonal straps.
4. When both diagonal straps are tensioned, feed strap back through
safety tri-slide clip.
Designed & Distributed by
MSA 4X4 Accessories
43 Harrington Street
Arundel, Gold Coast
QLD 4214 Australia
Ph: 07 5594 6664
www.msa4x4.com.au
ABN: 50 150 429 566
Please refer to our website
for lifetime guarantee full
terms and conditions