MSA PrimaX User manual

PrimaX
Gas Monitor
Instruction Manual
WARNING
THIS MANUAL MUST BE CAREFULLY READ BY ALL INDIVIDUALS WHO HAVE OR WILL
HAVE THE RESPONSIBILITY FOR USING OR SERVICING THE PRODUCT. Like any piece
of complex equipment, this instrument will perform as designed only if it is used and
serviced in accordance with the manufacturer’s instructions. OTHERWISE, IT COULD
FAIL TO PERFORM AS DESIGNED AND PERSONS WHO RELY ON THIS PRODUCT FOR
THEIR SAFETY COULD SUSTAIN SEVERE PERSONAL INJURY OR DEATH.
The warranties made by Mine Safety Appliances Company with respect to the product
are voided if the product is not used and serviced in accordance with the instructions
in this manual. Please protect yourself and others by following them. We encourage
our customers to write or call regarding this equipment prior to use or for any additional
information relative to use or repairs.
IN the U.S., to contact your nearest stocking location, dial toll-free 1-800-MSA-INST.
To contact MSA International, dial 724-776-8626. For repair inquiries, dial 1-800-MSA-INST.
© MINE SAFETY APPLIANCES COMPANY 2012 - All Rights Reserved
This manual is available on the internet at www.msaSafety.com
Manufactured by
MSA NORTH AMERICA
1000 Cranberry Woods Drive, Cranberry Township, PA, 16066
( )
Rev 0
10148984

2. Description
2.1 Identifying the Unit
IXamirPPXamirP
Explosion-Proof Version Intrinsically Safe Version
The PrimaX P Gas Monitor:
• is an explosion-proof version in an aluminum enclosure for the
detection of combustible gases, toxic gases, or oxygen.
The PrimaX I Gas Monitor:
• is a intrinsically safe version in a plastic enclosure for the
detection of toxic gases or oxygen
Figure 2-1. PrimaX Gas Monitor
2-1