MSI AEGIS R 13th User manual

USB Type-C
Mini DisplayPort
DVI
HDMI
DisplayPort
Know Your Video Connectors
Step 1 REMOVE THE TEMPERED GLASS SIDE PANEL
Remove the four thumbscrews on the tempered glass side panel. And gently
remove the tempered glass panel away from the case and place it in a safe area.
Step 2 REMOVE THE FOAM PACKAGING
Carefully pull the foam packaging out the system. It should come out easily
without having to apply any force.
Step 3 INSPECT YOUR PC
Make sure all components and cables are seated firmly. Now, you can replace
the tempered glass side panel and secure with thumbscrews.
Step 4 CONNECT YOUR MONITOR
Connect your monitor to either display ports or HDMI ports on the graphics
cards.
Step 5 CONNECT WIFI ANTENNAE, KEYBOARD & MOUSE
Screw the Wi-Fi Antennae to the gold contact points on the rear of the case.
Plug the mouse and the keyboard into any of the USB ports.
Step 6 POWER ON YOUR DESKTOP
Plug the power cable into the power cable socket and plug the other end of
the power cable into a power outlet. Turn the power supply switch on by
having the “I” symbol on the switch pressed down. Press the power button.
If you have any further questions regarding your new computer, please do not hesitate to contact us either through the online customer service site
https://us.msi.com/support or by contacting our customer support at 1-626-271-1004, Monday to Friday from 9:00 a.m. to 6:00 p.m. Pacific Standard Time. You can
also contact technical support by calling 1-888-447-6564, Monday to Friday open 24 hours (Weekend and Public Holiday closed). We will reply to you as soon as possible.
IMPORTANT
PLEASE READ BEFORE TURNING ON THE DESKTOP
G52-BZ011X1-LAX
Scan for setup
video guides

AEGIS R 13th
Gaming Desktop
User Guide

4
Specication
Fan LED
Controller
MPG GUNGNIR 110R, 110R WHITE, 111R
1 to 6 ARGB (3 pin) Control Board
MPG GUNGNIR 110M, 110L, 111M
N/A
Pre-Installed Fan
MPG GUNGNIR 110R, 110R WHITE, 111R
Front: 120 mm ARGB fans x3
Rear: 120 mm ARGB fan x1
MPG GUNGNIR 110M
Front: 120 mm Auto RGB fans x3
Rear: 120 mm Black fan x1
MPG GUNGNIR 111M
Front: 120mm RGB fan x 3
Rear: 120 mm Black fan x1
MPG GUNGNIR 110L
N/A
Case
Dimensions
430(D) x 215(W) x 450(H)
16.92(D) x 8.46(W) x 17.71(H) inch
Motherboard
Support ATX / M-ATX / Mini-ITX
Drive Bays 2x 3.5" / 2.5" combo trays
2x 2.5" SSD trays

5
IO Panel
1x Power button
1x LED switch button
1x Reset button
1x Mic in jack
1x Audio out jack
2x USB 3.2 Gen1 Type A ports
1x USB 3.2 Gen2 Type C port
Fan Support
Top: 120 mm x2 / 140 mm x2
Front: 120mm x 3 / 140mm x 2
Rear: 120 mm x1
Radiator
Support
Top: 120 /240 mm
Front: 120 / 140 / 240 / 280 / 360 mm
Rear: 120 mm
Clearance
CPU Cooler Height: Max 170 mm / 6.69 inch
Graphics Card Length: Max 340 mm / 13.38 inch
PSU Length: Max 250 mm / 9.84 inch
Material
Left Side: Tempered glass
Right Side: Metal
Top: Metal
MPG GUNGNIR 110R, 110R WHITE
Front: Glass + Metal
MPG GUNGNIR 111R, 110M, 110L, 111M
Front: Plastic + Metal

6
Case Features

7
Side & Front View
430 mm
450 mm
215 mm
480 mm

8
IO Panel
LED e󽙋ects:
Short press the LED switch button to change up to 26 modes.
Press and hold the LED switch for 3 seconds the LED flash white light once,
and then into the MSI motherboard Mystic Light synchronization mode. Short
press once to back to the Hub control mode.
Press and hold the LED switch for 6 seconds to turn o󽙋 the LED.
1. Power button
2. Reset button
3. Power LED
4. USB 3.2 Gen2 Type C
5. USB 3.2 Gen1 Type A
6. Mic in
7. Audio out
8. LED switch button
(For GUNGNIR 110R, 111R)
23 4 5 6 7 81

9
SSD & HDD Installation

10
Opening the Left & Right Side Cover

11
Motherboard Installation

12
Cables Connection
JUSB
(USB 3.2 Gen2) JUSB
(USB 3.2 Gen1)
SATA Power
JAUD1
JFP1
HDAUDIO

13
Graphics Card Installation

14
PSU Installation

6
Installing a Processor
⚽
∙https://youtu.be/KMf9oIDsGes
11
22
33
66
44
5577
88
99

7
Installing DDR5 memory
DIMMA2 DIMMA2
DIMMB2
DIMMA1
DIMMA2
DIMMB1
DIMMB2
∙https://youtu.be/XiNmkDNZcZk
⚽

8
HDD LED
RESET SW
Connecting the Front Panel Header
∙http://youtu.be/DPELIdVNZUI
JFP1
HDD LED HDD LED -
HDD LED +
POWER LED -
POWER LED +
POWER LED
RESET SW
POWER SW
POWER LED+
POWER LED-
HDD LED
⚽
1
2 10
9
Power LED
Reserved
Power Switch
JFP1
Reset SwitchHDD LED

9
Installing the Motherboard
11
∙https://youtu.be/wWI6Qt51Wnc
⚽
BAT1
Torque:
3 kgf·cm*
*3 kgf·cm
= 0.3 N·m
= 2.6 lbf·in
22

10
Connecting the Power Connectors
∙http://youtu.be/gkDYyR_83I4
ATX_PWR1
⚽
CPU_PWR1
CPU_PWR2

11
Installing SATA Drives
∙http://youtu.be/RZsMpqxythc
11
2233
44
55
⚽

12
Installing a Graphics Card
∙http://youtu.be/mG0GZpr9w_A
⚽
11
22
33
44
55
66