Hardware
TM TM
Installing MSI Live Update 3
Quick Installation
4
Follow the steps to install the VGA card:
1. Remove the computer case.
2. Locate the expansion slot on your mainboard.
Warning: Inserting the VGA card into a wrong
slot may damage your card (refer to your
mainboard manual for more Information).
3. Put the card directly over the slot and
press one end of the card into the slot first.
Gently but firmly press the other end until the
card is fully seated in the slot.
4. Secure the card with a bracket screw.
5. Install all other cards and devices and connect
all the cables, and then install the case.
6. Connect the monitor. Now, you are ready to
install the software on your computer.
below
expansion
To install the driver of the VGA card to your computer,
CD
please follow the steps below:
1. Turn on the computer.
2. Insert the into the CD-ROM drive. The Autorun program will start the Setup
program, and show the setup screen as follows:
Tip : If, on your computer, the
Autorun program does not execute
automatically, please 1) enable the
CD-ROM drive Auto-detect function
from Control Panel; or 2) find and
run the setup.exe file manually from
the CD.
Software R
Getting Started 23Getting Started
1
Overview
Note: The VGA card shown here may vary from the actualcard.
For further information, please visit MSIwebsite at www.msi.com.tw
PCI Express Interface
Dual DVI-I Port(yellow)
Dual Dual-Link DVIoutput
supported
512MB DDR2 memoryor
256MB DDR2 memory
2600PROATI Radeon HD
Fully DirectX 10.0 compliant, including full speed 32-bit floating point per component
operations
Shader Model 4.0geometry and pixelsupport in a unified shader architecture:
Full speed 32-bitfloating point processingper component.
High dynamic rangerendering with floatingpoint blending, texture filtering and anti-
aliasing support.
High performance dynamicbranching and flowcontrol.
Advanced shader design,with ultra-threading sequencerfor high efficiency operations.
Advanced, high performancebranching support, includingstatic and dynamic branching.
Full anti-aliasing onrender surfaces upto and including 128-bit floating pointformats.
Supportfor OpenGLR 2.0
Anti-Aliasing Filtering:
2x/4x/8x modes.
Sparse multi-sample algorithmwith gamma correction,programmable sample patterns,
and centroid sampling.
Temporalanti-aliasing.
Adaptive anti-aliasing mode.
Lossless color compression(up to 8:1)at all resolutions, up to andincluding widescreen
HDTV.
Anisotropic Filtering:
2x/4x/8x/16x modes
Up to 128-taptexture filtering.
Advanced Texture Compression (3Dc+ ):
High quality 4:1compression for normalmaps and luminance maps.
Works with anysingle-channel or two-channeldata format.
- Full symmetry onboth heads.
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
TM
System Requirements
Card Features For reference only
Unpacking
Please check out the following items to make sure that you get the complete product:
VGA card
Disk: Drivers, documentation, and applications
Consult your dealer immediately if anything is missing or damaged.
To install the VGA card, your computer system needs to meet the following requirements:
Intel Pentium III (and above), AMD K7 (and above), or compatible with expansionslot
128MB of system memory
Installation software requires CD-ROM drive
Operation System Support: visit MSI website for further information
Power supply of 400 (and up) watt is highlyrecommended for system stability
For DVI-HDMI adapter, please visit http://ati.amd.com/ to get thecompatible mainboard
information.
TM
RRR
Fan Connector
TV_Out Connector (S)
HDTV-Output integrated
3. Click ATI VGA Drivers. Follow the on-screen instructions to complete the installation.
4. After finishing the installation, restart the computer as instructed.
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
- Supports industry standardEIA-861B video modes including 480p, 720pand 1080i. For a
full list ofcurrently supported modes,contact your AMD CSS representative.
-
-
-
-
-
-
-
-
New vertex cacheand vertex fetchdesign, to increase vertex throughput fromprevious
generations.
New multi-level texturecache to giveoptimal performance, greater than 8x theprevious
designs.
High efficiency ring bus memory controller:
Programmable arbitration logicmaximizes memory efficiency, software upgradeable.
Fully associative texture,color, andZ cache design.
New hierarchical Z& Stencil bufferswith Early Z Test.
New lossless Z-buffercompression for bothZ and Stencil.
Fast Z-Buffer Clear.
Z cache optimizedfor real-time shadowrendering.
Integrated HD Audio Controller (Azelia) and Codec
Integrated HDAudio codec supportslinear PCM and DolbyR Digital (5.1)audio formats for
HDMI output.
Uses Microsoft UAAdriver.
Internally connected tothe integrated HDMIinterface, hence no external cable required.
PCI device id: AA10h(Azalia), AA11h (Audio Codec).
Support for basicaudio (32, 44.1or 48 kHz stereo) and DolbyRDigital or DTSat the same
sample rates.
DVI/HDMI Features
Fully compliant withthe DVI electricalspecification.
Fully integrated DVI/HDMIInterface
Supports one singlelink DVI orone HDMI link (HDMI output onsingle-link TMDS1 only).
Meets Vista logorequirements.
1650 Mbps/channel with165 MHz pixelclock rate per link.
Dual-link support fordisplay resolutions upto 3840x2400 per display output.
Flexible support ofthe following configurations:CRT + DVI/HDMI, TV +DVI/HDMI,
DVI/HDMI + DVI/HDMI.
Maximum pixel frequencyof 400 Mhz.
HDCP support availableon all DVIand HDMI links with integrated keystorage for up to two
simultaneous outputs includingdual-link DVI. (Note:HDCP available only to HDCP
licensed buyers).
iDCT/DCT and colorspace conversion
HW DXVAparser support for iDCT
MPEG-4 Simple Profilesupport
All-format DTV/HDTV decoding.
TM
Avivo Display System -- Dual DACs & MPEG 1/2/4 decode and encode acceleration: