Muji MJ-DCLA2GL User manual

Model No. MJ-DCLA2GL
This product complies with all relevant and effective
European Community legislations.
This symbol on the product, packaging, and/or
accompanying document indicates that this product should
not be disposed with normal household waste. This product
shall be taken to the applicable collection point for recycling.
The correct disposal of your old product will help prevent
potential negative consequences for the environment and
human health. For more information about recycling of this
product, please contact the shop where you purchased the
product, or your local authority.
This symbol on the battery or on the packaging indicates
that the battery provided with this product shall not be
treated as household waste.
Please inform yourself about the local rules on separate
collection of batteries. The correct disposal of batteries
helps to prevent potentially negative consequences for the
environment and human health.
Manufactured by RYOHIN KEIKAKU CO., LTD.
4-26-3 Higashi-ikebukuro, Toshima-ku, Tokyo, JAPAN
Imported to EU by MUJI Deutschland GmbH
Kurfuerstendamm 236, 10719 Berlin, Germany
Imported to Australia by MUJI RETAIL(AUSTRALIA)PTY LTD
Level 5 90 William Street Melbourne, VIC 3000, Australia
Digital clock (With loud alarm)
To prevent accidental swallowing, please keep batteries
and small parts out of reach from children.
If accidental swallowing occurs, seek medical treatment
immediately.
• Regularly change the batteries even if the clock is functioning.
• Remove the batteries when not in use for long periods.
• Remove the batteries immediately once the clock stops functioning.
• Use the batteries before the expiry date.
• When changing to new batteries, be sure to change all at once.
• Keep batteries out of reach from children.
• When the display becomes faint, replace the battery.
Doing so may cause battery leakage or heating, resulting in a
malfunction or injury.
Explanation of symbols
indicates prohibited conduct.
indicates compulsory items.
Safety Advice Please read carefully and be sure to follow instructions.
WARNING
Indicates a hazard with a medium level of risk which,
if not avoided, could result in death or serious injury.
Indicates a hazard with a low level of risk which, if not
avoided, could result in minor or moderate injury.
CAUTION
Doing so may cause battery leakage, heating, or explosion.
• Do not short-circuit the battery.
• Do not disassemble the battery.
• Do not damage the battery.
• Do not charge the battery.
• Do not heat the battery.
• Do not expose the battery to fire.
Do not touch the liquid leaked out of battery.
If it comes in contact with the eyes or skin, it may cause
blindness, inflammation, or other injuries. In case of contact,
rinse immediately well with tap water and seek treatment from
a physician.
If the battery is leaking, remove the battery and wipe
off the liquid thoroughly with a cloth or paper.
If it comes in contact with the eyes or skin, it may cause
blindness, inflammation, or other injuries.
Do not use a rechargeable battery.
Doing so may cause a malfunction.
Do not subject to shock such as strong vibrations or by
dropping it.
Doing so will result in damage or malfunction.
Do not use in places of high temperatures or humidity such
as the bathroom, sauna, bedrock bath or greenhouse.
This can lead to rust or damage.
Do not touch with wet hands.
This can lead to rust or damage.
Do not disassemble or modify.
This may cause injury or malfunction.
Do not let the alarm sound at a high volume near your ears.
It may cause hearing damage.
Do not use in the following places.
Doing so may cause degradation of the performance, deformation,
deterioration, or degeneration of the materials, or malfunction of the
product.
• Locations exposed to direct sunlight.
• Locations close to fire or heat from heating appliances.
• Locations with temperatures of -10 ˚C (14 ˚F) or lower or 50 ˚C
(122 ˚F) or higher.
•
Locations in the proximity of equipment with a strong magnetic field.
• Locations where the product is subject to excessive vibration such
as vehicles, ships, or construction sites.
• Locations exposed to a lot of dust.
• Locations where gas is generated such as a swimming pool or hot
spring.
• Locations where large quantities of oil are used, such as a kitchen.
• Locations where the product is in direct contact with rubber or soft
polyvinyl chloride for a long period of time. It may cause adhesion,
deterioration, or colour transfer.
・Do not insert the battery with and reversed.
• Do not use old and new batteries together.
• Do not use different types of batteries together.
Doing so may cause battery leakage or heating, resulting in a
malfunction or injury.
CAUTION
Do not use a rechargeable battery.
Doing so may cause a malfunction.
Maintenance
• If the product is very dirty, wipe off a little at a time with a soft cloth wet
with mild detergent diluted in water, and after that wipe dry.
• Do not use benzine, thinner, alcohol, or spray cleaner to clean the case.
Disposal of the clock and battery
• Please dispose of in accordance with the regulations of your local
government area.
• Please dispose your clock and battery separately.
Troubleshooting
Check these items first if the product does not appear to be
working properly.
Problem Cause & Solution
It shows different result from
other thermo-hygrometer.
○Accuracy is different from each
product. Especially, the humidity
sensor easily shows with an
error. Also temperature indoor is
always not the same. Even the
same product shows different
result when you change a place
to use. Check the result after
change the place.
○The batteries could be low.
please change to new batteries.
The display is faint. The display
turns faint, dark, or missing
segments when alarm.
○ It may have affected by static
electricity. Press the RESET button.
The display is missing segments
and not working properly.
○ It's not malfunction. This is because
an electric charge is left in a circuit. It
will go out after a while.
The display does not go out
immediately even take out
batteries.
Specifications
• The liquid crystal display may become slower or weaker at or below 0 °C/32 °F, or may
become darker or less uniform in color when temperatures rise to or above 40 °C/104 °F.
When the temperature returns to between 0 °C and 40 °C (+32 °F to +104 °F) the display
will operate normally.
• After 5 years the display shown by the liquid crystal display may become weaker.
Operational
temperature/humidity range
Liquid crystal legible
temperature range
Clock Function
Time Accuracy
Batteries
Battery life
Alarm Function
Alarm Accuracy
Alarm Sound
Volume
Snooze Function
Auto-stop Function
Calender
Time Display Method
Light
Temperature Display Range
Temperature Accuracy
Humidity Display Range
Humidity Accuracy
Measurement Interval
Outer Size
Weight
Materials
Waterproof Feature
-10 to +50 °C (+14 to +122 °F), 85 % RH or less
(no condensation)
0 to 40 °C (+32 to +104 °F)
Quartz
Average monthly difference within ±30 seconds (when used
at temperatures between +5 to +35 °C(+41 to +95 °F))
2 AA manganese batteries(R6P/1.5 V)
Approx. 1 year Alarm used 30 seconds a day with middle level
of volume. And light used 30 seconds a day.
Alarm at the time set
±0 second to the displayed time
Electric sound, Sound changes in 4 levels
Changeable, Maximum volume approx. 100 dB (above speaker)
Provided
Provided
From year 2014 to 2099
Interchangeable in AM/PM 12 hours or 24 hour time
LED light used for LCD display part
-9.9 to +50 °C(+14.1 to +122 °F)
±2 °C(±3.6 °F), between display available range
20 to 95 %RH (%RH means Relative Humidity)
±10 %RH, between display available range
Every 1 minute
W148 x D64 x H59mm
(W5.83 x D2.52 x H2.32 in)
230 g (0.51 lb) (include batteries)
Case ABS/ LCD Display Glass
None
About the Battery
■Life of the battery
• The battery provided has been kept in factory storage so it may last
shorter than the specified battery life.
• Depending on the conditions of use such as the temperature, battery
life may be shorter than specified.
• When using a battery that has been kept in storage, battery life may
be shorter than the "Battery expiration date" depending on the
storage condition.
■Types of battery
• Dry alkaline batteries have a long lifetime compared to manganese
batteries.
8ZDA29AZ-5 （Y2111）

How to Use
To insert the batteries and set the date/time (when replacing the batteries)
*Electronic sound "Pi-" will beep when batteries are inserted or the RESET button is pressed.
①Insert 2 AA batteries.
②Press RESET
To avoid malfunction, make sure to press this right after inserting batteries.
③Following the example, set the year, month, day and time (hour, minute,
seconds) in that order.
Use the year/month/day and time (hour/minute/seconds) button to set.
Adjust the display by pressing the + or - button while it is flashing,
then press the TIME SET button.
Example To set 24/10/2015 AM10:37:30
Do not insert the battery with and reversed.
Doing so may cause battery leakage or heating, resulting in a malfunction or injury.
Press and
release
Forward by 1
Reverse by 1
Press and
hold
Fast forward
Fast rewind
①Press TIME SET for about 2 seconds until the year
flashes.
The electronic sound "Pi-" will beep.
②Set the year with + or - then press TIME SET.
③Set the month with + or - then press TIME SET.
④Set the day with + or - then press TIME SET.
⑤Set the hour with + or - then press TIME SET.
⑥Set the minutes with + or - then press TIME SET.
⑦Set the seconds with + or - then press TIME SET.
When the electronic sound "Pipi" beeps, the display
is set and the clock will start.
• If the button is not
pressed within 30
seconds, setting
function will end and
"Pipi" will beep.
When using the 12-hour-clock
display, please set the time after
checking the AM/PM display.
Setting the alarm time
To use the alarm function
①Turn the ALARM ON/OFF switch to OFF.
②Press + or - after which the alarm time will flash.
③Press + or - to set the alarm time.
④If the button is not pressed within 5 seconds, setting
function will end.
When using the 12-hour-clock
display, please set the time after
checking the AM/PM display.
Press and
release
Forward by 1
Reverse by 1
Press and
hold
Fast forward
Fast rewind
Setting the alarm switch
When it is ON, the alarm time will be displayed and the alarm will sound at the set time.
Alarm will
sound
To stop or
turn the alarm off.
Note
When the ALARM ON/OFF switch is ON, the alarm will sound
everyday. Please turn it OFF when not using the alarm.
Alarm volume control and trial listening
Pressing the ALARM MONITOR will sound the alarm.
Turn the ALARM VOLUME to the desired volume.
To turn off the alarm sound, press any button except for the RESET button.
Low High
■Auto-stop Function (Automatic shut-off alarm)
When left unattended, the alarm will automatically switch off after about 2 minutes.
■Snooze function (Alarm is off but will still sound)
By pressing the SNOOZE button while the alarm is sounding, will flash and the alarm will sound
again in about 5 minutes. This function can be repeated 7 times. Pressing the SNOOZE button the 8th
time will end the alarm, and will be displayed.
○When the alarm function is on, pressing the ALARM MONITOR will not work.
Switching display screen
By pressing the DISPLAY button, you can change the 12/24 HR time, TIME/DATE Main display, temperature
unit and Summer time, in that order. Please set according to the example below.
○The electronic sound will beep
when switching displays
function has started and ended.
○When setting the display, if the
button is not pressed for 30
seconds, the setting function
will end. The electronic sound
"Pipi" will beep.
○When choosing Summer time,
DST will display and the time
displayed will be 1 hour ahead
of the current time.
The alarm time will not change.
To start changing the display.
12 HR
Select with +/-
24 HR
Time Main Display
Celsius (°C)
Normal Time
Date Main Display
Fahrenheit (°F）
Summer Time
Setting function has ended.
Do not let the alarm sound at a high volume near your ears.
It may cause hearing damage.
The illustrations are for use as operating instructions and may differ from the actual product.
To select the display of the alarm time or to set the time and date manually.
This will reset the settings to 12:00 AM 1/1/2014, alarm at 6:00 AM, 12 HR display, Celsius
temperature display and standard time display. Use a thin stick such as a toothpick to press.
To set the time and date.
To change the display between time, time/date, Celsius/Fahrenheit, and Summer time.
To sound the alarm. To stop the alarm, press any button except for the RESET button.
To adjust the alarm volume.
ON - To turn the alarm on at the set time. OFF - To turn off the alarm.
When pressed while the alarm is sounding, it will stop at 5 minute intervals.
It is the same button to press for the light, so the liquid display will light up when this button is pressed
and for 3 seconds after it is pressed.
* To avoid the clock from falling, place on
a horizontal, stable location with
minimal vibration.
When changing batteries or
operating the clock, remove
the back cover, and replace
when finished.
Removing the Cover
Push this part while sliding it
towards the direction of the arrow.
Attaching the Cover
When inserting battery ①,
insert it into slot ②first, then
slide it to the right.
Speaker Back Cover
LCD
Name and function of each part
Getting to Know the display
◎Depending on the angle you look at the liquid display, it may appear faint or blurry.
◎
There is an option to have the main display set as the time or the day/month, where it will be displayed larger.
There is also the option to display in 12 HR or 24 HR time. Refer to ■
3 Switching display screen
◎The alarm will be displayed as it's displayed in the time display.
◎When inserting batteries, pressing the RESET button will set the main display as the time in 12 HR time.
Month/DayCurrent time (Hours,minutes,seconds)
Time Main Display
day of week
In 12 HR time, AM or PM is displayed.
When Summer Time is set, DST will be displayed.
Month/Day Current time (Hours,minutes)
Day/Month Main Display
Alarm time (Hours, minutes)
When Alarm is ON
Alarm Mark
◎Time Main Display is set.
◎Day is not displayed.
Temperature/Humidity Display
Within Range of Measurement
Refer to ■
3
Changing the
display for changing between
Celsius and Fahrenheit.
Fahrenheit display will round
down to 1 decimal point.
Celsius Humidity Fahrenheit Humidity
Out of Range of Measurement
Temperature Humidity
Lower than -9.9 °C (+14.1 °F) Less than 20 %
Higher than 50 °C (+122 °F) Greater than 95 %
Unable to measure
Humidity can be measured when the temperature
is between 5 to 50 °C (+41 to +122 °F).
Monitor Status: When ALARM MONITOR is pressed to test the alarm sound.
Day/Time Display Status: Normal status when day/time is displayed.
Alarm Status: When alarm is sounding or is temporarily off during snooze.
Date/time Setting: Setting the date/time. Refer to ■
1 To insert the batteries and set the date/time
(when replacing the batteries)
Alarm Time Setting: Setting the alarm. Refer to ■
2 To use the alarm function.
Display Setting: Setting the 12/24 HR time display, time/date main display, temperature unit, Summer
time. Refer to ■
3 Switching display screen.
Clock status and operation
◎When the alarm is on, it is not possible to change the setting for Date/Time or Alarm Time. Turn the ALARM
ON/OFF switch to OFF before doing so.
◎
When setting the date/time, it is not possible to change to other settings or statuses. Also, when changing
settings, changing the alarm to ON or OFF will not show on the display. Only when you have finished changing
the settings, the display will change.
Temperature And Humidity
LCD Illuminators
The light will turn on whilst the SNOOZE button is pressed and for 3 seconds after it is pressed. Please view the
display from the front while it is lit up. If viewed from other directions, the display will appear faint or not visible.
This product is for general home or office use indoors.
Placing it in an area with direct sunlight, near cooling/heating appliances, humidifiers or dehumidifiers
will make it harder to detect the room's humidity.
As the sensor is located inside the body of the clock, it will take time for the display to reflect the measurement.
Also, depending on the height it is placed, the temperature and humidity may differ. The measurement of
humidity is affected by air flow so the display may differ or not change depending on good or bad air flow in the
same room.
* It cannot be used for monitoring precise temperature or humidity or for commercial purposes.