Muji MJ-1601 User manual

KEEP THIS FOR YOUR REFERENCE
User’s Manual
• Thank you for your purchase.
• Keep this User's Manual for future reference.
• Read this User Manual before using this product.
Stand for Wall Clock and Wall Mounted CD Player Silver
Table of Contents Pages
Safety Advice
Included Parts
Assembly and Usage
2
3
4
1
User's Manual Serial No. MJ-1601-1
Model Number MJ-1601

These instructions must be followed.
Caution
Safety Advice
Read and comply with these instructions to avoid physical harm or injury.
■ ■
Warning
Assembly Cautions
Caution
2
Warning
These symbols indicate the degree of injury or damage
that may arise when the product is used incorrectly.
These symbols indicate instructions for the user.
(The following symbols are examples.)
Indicates a hazard which, if not avoided,
could result in death or serious injury.
Indicates a hazard which, if not
avoided, could result in damage.
Actions that are prohibited.
Actions that are mandatory.
• Do not use on an unstable or unbalanced surface (on the end of a table or shelf, etc.).
Doing so may result in the product falling, causing injury or damage.
• Do not insert screws in the direction opposite from that shown in Assembly and Usage.
Doing so may result in the product falling, causing injury or damage.
• Do not use in a location that is not horizontal, a location that is slanted, or a slippery location.
The product may slide and fall, causing injury or damage.
• This product is designed to be used with MUJI Wall Clocks, Hanging Clocks,
Wall Mounted CD Player (CPD-2, CPD-3, CPD-4), and Wall Mounted Bluetooth Speaker (MJBTS-1).
For your safety, do not use this product with any other clocks, CD players, or Bluetooth speakers.
• Follow the instructions related to usage environment and installation environment in this User's Manual for
each product.
• Use a Phillips head screwdriver (equivalent to JIS #2; 6mm diameter) to assemble this product.
[For Wall Clock and Hanging Clock]
• Adjust the distance that the the screw protrudes as indicated in the clock's User's Manual.
• See the User's Manual for instructions on hanging the clock.
• If the clock falls forward when hung, adjust the distance that the screw protrudes.
However, be sure to leave enough protuberance for hanging the clock.
• The 4 screw holes, 2 on the left and 2 on the right, are designed specifically for the Wall Mounted CD Player
and the Wall Mounted Bluetooth Speaker.
[For Wall Mounted CD Player and Wall Mounted Bluetooth Speaker]
• The wall mount plate for the Wall Mounted CD Player and Wall Mounted Bluetooth Speaker has a specific
installation direction. Correctly install by following the instructions in this User's Manual.
• See the respective User's Manuals for the Wall Mounted CD Player and Wall Mounted Bluetooth Speaker for
Wall Mounted CD Player and Wall Mounted Bluetooth installation instructions.

Included Parts
For Wall Clock
Installation screw x 1 (M4 x 25)
For Wall Mounted CD Player
For Wall Mounted Bluetooth Speaker
Installation screw x 4 (M4 x 15)
Accessories
3
Main Unit
Specifications
Size 10cm wide x 15cm long x 28cm high (3.94in wide x 5.91in long x 11.02in high)
Weight Approx. 800g(1.76lb)
Materials STEEL

Assembly and Usage
◎For Wall Clock and Hanging Clock
◎For Wall Mounted CD Player and Wall Mounted Bluetooth Speaker
4
Use the M4×25 installation screw and screw into one of the nine screw holes lined up along the centre of the
stand according to the size and hanging position of the clock with a phillips screwdriver.
First, use 4 M4×15 installation screws to install the wall mount plate, on to the main unit with a phillips
screwdriver, and then install the Wall Mounted CD Player or Wall Mounted Bluetooth Speaker on to the wall
mount plate.