MULTIQUIP MC-3SEA User manual

www.multiquip.com
Mix-N-Go Concrete Mixers
Welcome to the future of portable concrete mixers.
The Mix-N-Go Concrete Mixer combines a
host of performance-enhancing features
with ease of transportation to, from and
around the job site. It can mix up to three
cubic feet of material, making the Mix-N-Go
the tool of choice for homeowners and small
contractors.
With a stronger frame and sturdy steel or
polyethylene drum, the Mix-N-Go is ideal
for small footings and bases, binding block
and concrete patching. It is available with a
gasoline engine or electric motor for operator
convenience and for increased versatility.
It can also be used as a wheelbarrow to
transport concrete, debris and other material
around the job site.
When the job is complete, the compact
Mix-N-Go fits neatly into the trunk of a car.
n New replaceable blades bolted to the drum.
n Choice of steel or polyethylene drums.
n Engine options — Gasoline or ¾ HP, 115 single-phase
UL- and CSA-approved electric motor.*
n Job site convenience — can use standard household power.
n Mixer stand allows drum to rotate 360 degrees.
n New on/off switch protection — water-resistant and
dust proof.
n Pneumatic tires.
Model MC-3PEA
Model MC-3SEA

© COPYRIGHT 2011, MULTIQUIP INC.
WQMIXNGO-4420 Rev. G (06-11)
MULTIQUIP INC.
POST OFFICE BOX 6254
CARSON, CA 90749
310-537-3700 • 800-421-1244
FAX: [phone]
E-MAIL: [email protected]
www.multiquip.com
Your Multiquip dealer is:
Mix-N-Go Concrete Mixers — Specifications
All features and specifications are subject to change without notice.
48.75" (1238mm)
31.41" (798mm)
56.10"
1425mm
47.67" (1211mm)
34.68"
881mm
23.5" (597mm)
40"
1016mm)
68.22"
1733mm
Dimensions
Bolt-in replaceable
mixing blades
Stronger, thicker
drum (available in
steel or poly)
Water-resistant,
dust-proof on/off
switch
Strong ¾ HP
brushless motor,
UL and CSA
approved
Improved gearbox;
gears immersed in
oil for long trouble-
free life
Model Drum
Construction
Max. Mixing
Capacity* Engine** Height in. (mm)
Width
in. (mm)
Length
in. (mm)
Stand
Weight
lb. (kg)
Dry
Weight
lb. (kg)
MC3SEA Steel 3.0 cu. ft. ¾ HP, 115V, 1ø
Electric Motor
34
(863.6)
23..%/8
(584.2)
48..!/2
(1219.2)
35
(15.9)
138
(62.6)
MC3PEA Polyethylene 3.0 cu. ft. ¾ HP, 115V, 1ø
Electric Motor
34
(863.6)
23..%/8
(584.2)
48..!/2
(1219.2)
35
(15.9)
138
(62.6)
MC3SBA Steel 3.0 cu. ft. Briggs & Stratton
148cc
34
(863.6)
23..%/8
(584.2)
48..!/2
(1219.2)
35
(15.9)
132
(59.9)
MC3PBA Polyethylene 3.0 cu. ft. Briggs & Stratton
148cc
34
(863.6)
23..%/8
(584.2)
48..!/2
(1219.2)
35
(15.9)
132
(59.9)
* Actual mix capacity may vary depending on aggregate size and mix design.
** Engine power ratings are calculated by the individual engine manufacturer and the
rating method may vary among engine manufacturers. Multiquip Inc. and its subsidiary
companies makes no claim, representation or warranty as to the power rating of the engine
on this equipment and disclaims any responsibility or liability of any kind whatsoever
with respect to the accuracy of the engine power rating. Users are advised to consult the
engine manufacturer’s owners manual and its website for specific information regarding
the engine power rating.
Connect with us on