PAGE 10 —EC-92P/S CONCRETE MIXERS — PARTS & OPERATION MANUAL — REV. #7 (12/22/06)
■
In emergencies
always
know the location of the
nearest phone or
keep a phone on the job site
.
Also know the phone numbers of the nearest
ambulance
,
doctor
and
fire department
. This
information will be invaluable in the case of an
emergency.
■
NEVER disconnect any
"emergency or safety devices"
.
These devices are intended for operator safety.Disconnection
of these devices can cause severe injury, bodily harm or even
death! Disconnection of any of these devices will void all
warranties.
■
If mixer is equipped with an electric motor, operate electric
motoronlyatthespecifiedvoltageindicatedonthenameplate.
■
Makesurethe
OFF/ON
powerswitchon theelectric motoris
always
inthe
OFF
positionbeforeinsertingthemixer'spower
plugintoanACreceptacle (electric model only).
Maintenance Safety
■
NEVERlubricatecomponentsorattemptserviceonarunning
machine.
■
ALWAYS allowthemachine a proper amountoftime to cool
beforeservicing.
■
Keepthemachineryin proper running condition.
■
Fixdamage tothemachine immediatelyandalways replace
brokenparts, or missing decals.
■
Disposeofhazardouswasteproperly.Examplesofpotentially
hazardouswasteareusedmotoroil,fuelandfuelfilters.
■
DO NOT use food or plastic containers to dispose of
hazardouswaste.
■
DO NOT pour waste, oil or fuel directly onto the ground,
downa drain or into any water source.
Emergencies
■
ALWAYS know the locationofthenearest
fire extinguisher
andfirst aid kit.
EC-92P/S CONCRETE MIXER — RULES FOR SAFE OPERATION
■
NEVER run enginewithout aircleaner.Severeengine damage
may occur.
■
ALWAYS read, understand, and follow procedures in
Operator’s Manual before attempting to operate equipment.
■
ALWAYS be sure the operator is familiar with proper safety
precautions and operations techniques before using roller.
■
ALWAYS store equipment properly when it is not being used.
Equipment should be stored in a clean, dry location out of the
reach of children.
■
NEVER leave the mixer unattended, turn off engine or electric
motor when unattended.
■
CAUTION mustalwaysbeobservedwhileservicing this mixer.
Rotating parts can cause injury if contacted.
■
Unauthorized equipment modifications will void all
warranties.
■
Ensurethatanyextensioncableisprotectedagainstdamage
and not liable to be tripped over or trapped underneath the
mixer.
■
DONOT allowextensioncordtocomeintocontactwithwater
orfluids.
■
DO NOT spraywaterontoelectricmotor.
■
Thismixeris intended for the production of concrete. Mixer
mustbeusedonlyforitsintendedpurpose.
■
This mixer is not suitable for the mixing of
flammable
or
explosive
substances.
■
NEVER operatethe mixer in an
explosive
atmosphere.
■
Beforestartingthemixer,checkthatall
guards
areinposition
andcorrectly fitted.
■
Keep area around the mixer
clear of obstructions
which
could cause persons to fall onto
moving parts
.
■
ALWAYS ensure mixer is on level ground before mixing.
■
Become familiar with the controls of the mixer before
operating.
■
ALWAYS replace any worn or damaged warning decals.
■
Ensure the drum is
rotating
while filling and emptying the
drum.
■
ALWAYS disconnect AC power plug from power source
beforemovingmixer (electric model only).
■
High Temperatures – Always stop engine and allow the
engine to cool before adding fuel, oil or performing service
and maintenance functions. Contact with
hot
components
cancause serious burns.
Go to Discount-Equipment.com to order your parts
