Multitech MultiConnect Dragonfly MTQ-MNG6-B02 Application guide

MultiConnect®Dragonfly TM
MTQ-MNG6-B02 Device Guide

DRAGONFLYTM DEVICE GUIDE
2 MultiConnect®Dragonfly TM MTQ-MNG6-B02 Device Guide
DragonflyTM Device Guide
Models: MTQ-MNG6-B02
Part Number: S000809
Copyright
This publication may not be reproduced, in whole or in part, without the specific and express prior written permission signed by an executive officer of
Multi-Tech Systems, Inc. All rights reserved. Copyright © 2023 by Multi-Tech Systems, Inc.
Multi-Tech Systems, Inc. makes no representations or warranties, whether express, implied or by estoppels, with respect to the content, information,
material and recommendations herein and specifically disclaims any implied warranties of merchantability, fitness for any particular purpose and non-
infringement.
Multi-Tech Systems, Inc. reserves the right to revise this publication and to make changes from time to time in the content hereof without obligation of
Multi-Tech Systems, Inc. to notify any person or organization of such revisions or changes.
Trademarks and Registered Trademarks
MultiTech, and the MultiTech logo, MultiConnect, and Dragonfly are trademarks or registered trademarks of Multi-Tech Systems, Inc. All other products
and technologies are the trademarks or registered trademarks of their respective holders.
Legal Notices
The MultiTech products are not designed, manufactured or intended for use, and should not be used, or sold or re-sold for use, in connection with
applications requiring fail-safe performance or in applications where the failure of the products would reasonably be expected to result in personal injury or
death, significant property damage, or serious physical or environmental damage. Examples of such use include life support machines or other life
preserving medical devices or systems, air traffic control or aircraft navigation or communications systems, control equipment for nuclear facilities, or
missile, nuclear, biological or chemical weapons or other military applications (“Restricted Applications”). Use of the products in such Restricted
Applications is at the user’s sole risk and liability.
MULTITECH DOES NOT WARRANT THAT THE TRANSMISSION OF DATA BY A PRODUCT OVER A CELLULAR COMMUNICATIONS NETWORK WILL BE
UNINTERRUPTED, TIMELY, SECURE OR ERROR FREE, NOR DOES MULTITECH WARRANT ANY CONNECTION OR ACCESSIBILITY TO ANY CELLULAR
COMMUNICATIONS NETWORK. MULTITECH WILL HAVE NO LIABILITY FOR ANY LOSSES, DAMAGES, OBLIGATIONS, PENALTIES, DEFICIENCIES, LIABILITIES,
COSTS OR EXPENSES (INCLUDING WITHOUT LIMITATION REASONABLE ATTORNEYS FEES) RELATED TO TEMPORARY INABILITY TO ACCESS A CELLULAR
COMMUNICATIONS NETWORK USING THE PRODUCTS.
Contacting MultiTech
Sales Support
[email protected] [email protected]
[phone] [phone]
Website
https://www.multitech.com
Knowledge Base
For immediate access to support information and resolutions for MultiTech products, visit https://www.multitech.com/kb.go.
Support Portal
To create an account and submit a support case directly to our technical support team, visit: https://support.multitech.com.
Warranty
To read the warranty statement for your product, visit https://www.multitech.com/legal/warranty.
World Headquarters
Multi-Tech Systems, Inc.
2205 Woodale Drive, Mounds View, MN 55112
USA

CONTENTS
MultiConnect®Dragonfly TM MTQ-MNG6-B02 Device Guide 3
Contents
Chapter 1 – Product Overview ................................................................................................................................. 6
Overview ....................................................................................................................................................................... 6
Documentation ............................................................................................................................................................. 6
Product Build Options ................................................................................................................................................... 6
Chapter 2 – MTQ-MNG6 Mechanical Drawing ......................................................................................................... 7
Chapter 3 – Hardware and Specifications................................................................................................................. 8
Specifications ................................................................................................................................................................ 8
40-Pin Connector Definitions........................................................................................................................................ 9
40-Pin Connector ...................................................................................................................................................... 11
Electrical Characteristics ............................................................................................................................................. 12
Operating Conditions ................................................................................................................................................ 12
Absolute Maximum Rating........................................................................................................................................ 12
DC Electrical Characteristics...................................................................................................................................... 12
Power Draw - MTQ-MNG6-B02 .................................................................................................................................. 13
Chapter 4 – Antennas ............................................................................................................................................ 14
Requirements for Cellular Antennas with regard to FCC/IC Compliance ................................................................... 14
External Antenna Option ............................................................................................................................................ 14
Cellular Antenna.......................................................................................................................................................... 14
Cellular Antenna Specifications ............................................................................................................................... 14
SMA to U.FL Cables ..................................................................................................................................................... 16
Connecting an Antenna through the Developer Board Connectors........................................................................... 16
OEM Integration ......................................................................................................................................................... 16
FCC & IC Information to Consumers ......................................................................................................................... 16
FCC Grant Notes........................................................................................................................................................ 17
Host Labeling............................................................................................................................................................. 17
Chapter 5 – Safety Information .............................................................................................................................. 18
Handling Precautions .................................................................................................................................................. 18
Radio Frequency (RF) Safety ....................................................................................................................................... 18
Sécurité relative aux appareils à radiofréquence (RF).............................................................................................. 18
General Safety............................................................................................................................................................. 19
Interference with Pacemakers and Other Medical Devices ...................................................................................... 19
Potential interference............................................................................................................................................... 19
Precautions for pacemaker wearers ........................................................................................................................ 19
Vehicle Safety.............................................................................................................................................................. 19
Device Maintenance ................................................................................................................................................... 20
User Responsibility...................................................................................................................................................... 20

CONTENTS
4 MultiConnect®Dragonfly TM MTQ-MNG6-B02 Device Guide
Chapter 6 – Getting Started ................................................................................................................................... 21
Installing a SIM Card on a DragonFly ......................................................................................................................... 21
Installing Drivers.......................................................................................................................................................... 21
USB Cable Recommendations..................................................................................................................................... 21
Communications Flow................................................................................................................................................. 22
No Processor Model (B02) ........................................................................................................................................ 22
Communicating with the Device................................................................................................................................. 22
Configuring Device Firmware for Your Cellular Network............................................................................................ 23
Carrier Values............................................................................................................................................................ 23
Checking the Cellular Network ................................................................................................................................. 23
Setting the Cellular Network..................................................................................................................................... 23
Examples ................................................................................................................................................................... 23
Configuring a Data Connection ................................................................................................................................... 24
Configuring Packet Data Protocol ............................................................................................................................... 24
Example..................................................................................................................................................................... 24
Configuring APN.......................................................................................................................................................... 24
Configuring Verizon APN........................................................................................................................................... 24
Configuring APN for AT&T and Other Networks ...................................................................................................... 25
Registering the Device on a Cellular Network ............................................................................................................ 25
Examples ................................................................................................................................................................... 25
Testing Cellular Data ................................................................................................................................................... 26
Activating a PDP Context .......................................................................................................................................... 26
Conducting a Ping Test.............................................................................................................................................. 26
Configuring Low Power Options ................................................................................................................................. 26
Powering Down Your Device ...................................................................................................................................... 27
Device Reset (NRESET Pin 35) ..................................................................................................................................... 27
Chapter 7 – Verizon FOTA Information................................................................................................................... 28
Firmware Over the Air (FOTA) .................................................................................................................................... 28
Verizon Requirement: Firmware Over The Air (FOTA) ............................................................................................ 28
Chapter 8 – Labels.................................................................................................................................................. 29
Approvals and Certifications....................................................................................................................................... 29
Example Labels............................................................................................................................................................ 29
Chapter 9 – Regulatory Information....................................................................................................................... 30
47 CFR Part 15 Regulation Class B Devices ................................................................................................................. 30
FCC Interference Notice............................................................................................................................................ 30
FCC Grant Information.............................................................................................................................................. 31
Industry Canada Class B Notice................................................................................................................................. 33
EMC, Safety, and Radio Equipment Directive (RED) Compliance ............................................................................ 33
EMC, Safety, and Radio Equipment Regulations (UKCA) .......................................................................................... 34
Regulatory Compliance Mark (RCM) for Australia.................................................................................................... 34

CONTENTS
MultiConnect®Dragonfly TM MTQ-MNG6-B02 Device Guide 5
Chapter 10 – Environmental Notices ...................................................................................................................... 35
Waste Electrical and Electronic Equipment Statement .............................................................................................. 35
WEEE Directive.......................................................................................................................................................... 35
Instructions for Disposal of WEEE by Users in the European Union ........................................................................ 35
REACH-SVHC Statement ............................................................................................................................................. 35
Registration of Substances........................................................................................................................................ 35
Restriction of the Use of Hazardous Substances (RoHS) ............................................................................................ 36
Chapter 11 – Using Connection Manager ............................................................................................................... 37
Installing Connection Manager ................................................................................................................................... 37
Setting Up a Serial Device in Windows Device Manager............................................................................................ 38
Connecting a Device.................................................................................................................................................... 40
Uninstalling Connection Manager............................................................................................................................... 41
Connection Manager User Interface........................................................................................................................... 42
Main tab.................................................................................................................................................................... 42
Settings tab ............................................................................................................................................................... 43
Connection tab.......................................................................................................................................................... 43
Details tab ................................................................................................................................................................. 43
Terminal tab.............................................................................................................................................................. 43
Charts tab.................................................................................................................................................................. 43
Troubleshooting.......................................................................................................................................................... 44
Serial COM port is not available in the Serial Modem Settings................................................................................ 44
Device is not detected ("No Device") ....................................................................................................................... 44
USB Modem is not detected..................................................................................................................................... 44
Connection Manager is not working, and a device connected to the computer is not detected............................ 44
Connection Manager displays "Device Error" status for a serial device .................................................................. 44
System Cannot Connect to Serial Device.................................................................................................................. 45
Index...................................................................................................................................................................... 48

PRODUCT OVERVIEW
6 MultiConnect®Dragonfly TM MTQ-MNG6-B02 Device Guide
Chapter 1 – Product Overview
Overview
The DragonflyTM (MTQ) System-on-Module (SoM) offers developers the functionality of an on-board cellular radio
all-in-one compact design. The Dragonfly provides a practical solution to the market's demand for a smaller, low-
power module.
The Dragonfly and maintains interoperability with legacy systems that use a 40-pin connector and forward
mounting hole. All Dragonfly software is open source.
Important: The MTQ-MNG6-B02 must be configured for Cat M1 use only. Use AT#WS46=0 to ensure the device
is in Cat M1 mode.
Documentation
This documentation is on the product page at https://www.multitech.com/brands/multiconnect-dragonfly-nano.
Document Description Part Number
MTQ-MNG6 Device Guide This document. Provides hardware specifications and
developer information.
S000809
Universal Developer Kit 2.0
Developer Guide.
Provides information for using the developer board. S000779
USB Driver Installation Guide Provides instructions on how to install Windows USB driver. S000616
AT Commands Manual Provides AT commands and parameters used to configure
your device.
80617ST10991A
Note: Additional documentation is available on the mbed site at https://os.mbed.com/platforms/MTS-
Dragonfly/ and at www.multitech.net. See Getting Started for details.
Product Build Options
Product Description Region
MTQ-MNG6-B02 Embedded LTE Cat M1 with GNSS and 2G fallback Global
Developer Kit
MTUDK2-ST-CELL.R1 Developer Kit for Dragonfly devices. Global
Note:
These units ship without network activation. To connect them to the cellular network, you need SIM cards
from your service provider.
The complete product code may end in .Rx. For example, MTQ-MNG6-B02.Rx, where R is revision and x is
the revision number.
All builds can be ordered individually (-SP) or in 50-packs.

MTQ-MNG6 MECHANICAL DRAWING
MultiConnect®Dragonfly TM MTQ-MNG6-B02 Device Guide 7
Chapter 2 – MTQ-MNG6 Mechanical Drawing

HARDWARE AND SPECIFICATIONS
8 MultiConnect®Dragonfly TM MTQ-MNG6-B02 Device Guide
Chapter 3 – Hardware and Specifications
Specifications
Category Description
General
Standards LTE UE Category M1
3GPP Rel. 14 Compliant
3GPP Rel. 13 eDRx
3GPP Rel. 13 extended coverage
3GPP Rel. 12 PSM
Frequency Bands 4G Bands: B1, B2, B3, B4, B5, B8, B8_US, B12, B13, B18, B19, B20, B25, B26, B27, B28, B66
2G Bands: B2, B3, B5, B8
LED One, link status
Speed
Data Speed LTE Cat M1: Up to 1 Mbps uplink / Up to 588 Kbps downlink
EGPRS (2G Fallback): Up to 210 Kbps uplink / Up to 264 Kbps downlink
Interface
USB Interface USB 2.0 high speed
UART Full UART
Physical Description
Weight 0.6 oz (17g)
Dimensions Refer to Mechanical Drawings for details.
Connectors
Antenna 2 surface mount U.FL: cellular, GNSS
SIM Holder 1.8 V and 3 V Micro 3FF
Pin header 40-pin female for USB or UART
Environment
Operating
Temperature
-40° C to +85° C
Storage
Temperature
-40° C to +85° C
Humidity 20%-90% RH, non-condensing
Category Description
Certifications and Compliance

HARDWARE AND SPECIFICATIONS
MultiConnect®Dragonfly TM MTQ-MNG6-B02 Device Guide 9
Category Description
EMC and Radio
Compliance
FCC Part 15 Class B
FCC Part 22H, 24E, 27, 90
IC Class B
CE Mark, RED (EU)
RCM
UKCA
Safety Compliance UL 62368-1
cUL 62368-1
IEC 62368-1
Network Compliance PTCRB
Carrier AT&T/Verizon/T-Mobile (pending)
Note:
The battery management circuit is designed for single cell Li-Ion/Li-Poly technology. Acceptability of
the battery charge circuit for charging specific batteries/cells is to be determined in the end product.
Acceptability of the battery charge circuit for charging specific batteries/cells is to be determined in
the end product.
Radio performance may be affected by temperature extremes. This is normal.
Device has been tested up to +85° C. UL Recognized @ 85° C.
40-Pin Connector Definitions
Pin Minimum and Maximum Voltage
Unless otherwise specified in the Pin Definitions table:
Minimum High Voltage Maximum Low Voltage Maximum Input
Serial Input Signals 2.0V 0.8V 6.5V
Serial Output Signals 2.4V 0.55 --

HARDWARE AND SPECIFICATIONS
10 MultiConnect®Dragonfly TM MTQ-MNG6-B02 Device Guide
Pin Definitions
Pin Signal Name Logic Level Voltage1Max
Voltage
In/Out Description
1 NC
2 NC
3 NC
4 NC
5 GND GND GND Ground Connection
6 USB-DATA+ See USB 2.0 Spec for
levels
3.6V I/O USB Data+ connection to cellular
module
7 USB-DATA- USB Data- connection to cellular
module
8 VCC-IN 2.75V - 5.25V 5.25V Power Input Main Power
9 RADIO_RXD 0 - 3V O Cellular Radio UART Data Output
10 RADIO_DCD 0 - 3V O Cellular Radio UART Data Carrier
Detect
11 RADIO_RI 0 - 3V O Cellular Radio UART Ring
indicator
12 RADIO_CTS 0 - 3V O Cellular Radio UART Clear to Send
(flow control)
13 GND GND GND Ground Connection
14 NC
15 NC
16 NC
17 NC
18 NC
19 NC
20 NC
21 NC
22 NC
23 NC
24 NC

HARDWARE AND SPECIFICATIONS
MultiConnect®Dragonfly TM MTQ-MNG6-B02 Device Guide 11
Pin Signal Name Logic Level Voltage1Max
Voltage
In/Out Description
25 NC
26 NC
27 NC C
28 GND GND GND Ground Connection
29 RADIO_RTS 0 - 3V I Cellular Radio UART Request to
Send (flow control)
30 RADIO_DSR 0 - 3V O Cellular Radio UART Data Set
Ready
31 RADIO_DTR 0 - 3V I Cellular Radio UART Data
Terminal Ready
32 RADIO_TXD 0 - 3V I Cellular Radio UART Serial data
input from DTE
33 VCC-IN 2.75 - 5.25V Power Input Main Power
34 LINK_STATUS 3V O Cellular radio link status LED.
Open drain outputs with 47K pull
up to 3V.
35 RESET 0 - VCC input (VCC-IN) I Radio reset. Input has an internal
pull-up resistor. Drive with an
open drain output. Active low.
36 GND GND GND Ground Connection
37 GND
38 NC
39 NC
40 NC
40-Pin Connector
Manufacturer: Hirose Electric Co LTD
Description: .5MM 40 PN B>B RECEPTACLE
Model Number: DF17(4.0)-40DP-0.5V(57)
Use with:
Manufacturer: Hirose Electric Co LTD
Description: .5mm 40 pin B.B header PLUG
Model Number: DF17(2.0)-40DP-0.5V(57)

HARDWARE AND SPECIFICATIONS
12 MultiConnect®Dragonfly TM MTQ-MNG6-B02 Device Guide
Electrical Characteristics
Operating Conditions
Parameter Minimum Volts Maximum Volts
Supply Range - Vcc 2.75 5.25
Absolute Maximum Rating
Parameter Minimum Volts Maximum Volts
Voltage at any signal pin -0.3 5.5
DC Electrical Characteristics
Parameter Conditions Minimum Volts Maximum Volts
Digital signal input low level CMOS port
IIO=+8 mA
-0.3 0.9
Digital signal input high level CMOS port
IIO=+8 mA
2.1 5.5
Output low level voltage for an I/O pin CMOS port
IIO=+8 mA
- 0.4
Output high level voltage for an I/O pin VDD-0.4 -
Output low level voltage for an I/O pin TTL port
IIO=+8 mA
- 0.4
Output high level voltage for an I/O pin 2.4 -
Output low level voltage for an I/O pin IIO=+20 mA - 1.3(1)
Output high level voltage for an I/O pin VDD-1.3(1) -
Output low level voltage for an I/O pin IIO=+6 mA - 0.4(1)
Output high level voltage for an I/O pin VDD-0.4(1) -
Output low level voltage for an I/O pin IIO=+4 mA - 0.4(2)
Output high level voltage for an I/O pin VDD-0.4(2) -
RESET (low active) input low CMOS port
IIO=+8 mA
- 0.99
RESET (low active) input high CMOS port
IIO=+8 mA
2.31 -
RESET (low active) input high CMOS port
IIO=+8 mA
5.00 -
(1) Guaranteed by characterization results, not tested in production.
(2) Guaranteed by design, not tested in production.

HARDWARE AND SPECIFICATIONS
MultiConnect®Dragonfly TM MTQ-MNG6-B02 Device Guide 13
Power Draw - MTQ-MNG6-B02
Multi-Tech Systems, Inc. recommends you incorporate a 10% buffer into your power source when determining
product load.
Note:
Maximum Power: The continuous current during maximum data rate with the radio transmitter at
maximum power.
Tx Pulse: The average peak current during a GSM850 transmission burst period or LTE connection. The
transmission burst duration for GSM850 can vary, depending on what transmission scheme is being
deployed (GPRS Class 8, Class 10, GSM, etc.).
Inrush Charge: The total inrush charge at power on.
Radio
Protocol
PSM
Mode
(CPSMS)
eDRX
Mode
eDRX
Mode
with
CFUN=5
Cellular
Connection
Idle (No
Data)
(Amps)
Average
Measured
Current at
Max Power
TX Pulse
(AVG)
Amplitude
Current for
Peak
Current for
LTE
Total Inrush
Charge
measured
Total Inrush
Charge
DURATION
during
Power up
3.3V with Device on the Developer Board
GSM 850
UDK Card
N/A N/A N/A 41 mA 290 mA 1.9 A 0.196 mC 1.38 mS
LTE BAND
12 UDK
Card
707.5Mhz
21 mA 40 mA N/A 53 mA 355 mA 896 mA 0.196 mC 1.38 mS
5V with Device on the Developer Board
GSM 850
UDK Card
N/A N/A N/A 40 mA 274 mA 1.78 A 0.254 mC 1.35 mS
LTE BAND
12 UDK
Card
707.5Mhz
21 mA 39 mA N/A 41 mA 350 mA 888 mA 0.254 mC 1.35 mS
5V with Device USB Only
GSM850
USB Only
N/A N/A N/A 40 mA 304 mA 1.79 A 0.10 mC 2.06 mS
LTE BAND
12 USB
Only
707.5Mhz
19 mA 44 mA N/A 43 mA 383mA 1.1 A 0.10 mC 2.06 mS

ANTENNAS
14 MultiConnect®Dragonfly TM MTQ-MNG6-B02 Device Guide
Chapter 4 – Antennas
Requirements for Cellular Antennas with regard to FCC/IC
Compliance
This device has been designed to operate with the antennas listed below and having a maximum antenna gain of
6.18 dBi for the 700 MHz band, 6.00 dBi for 1700 MHz band, and 9.01 dBi for the 1900 MHz frequency band.
Antennas not included in this list or that have a gain greater than specified are strictly prohibited for use with this
device. The required antenna impedance is 50 ohms.
External Antenna Option
Cellular Antenna
Cellular devices were approved with the following antenna:
Manufacturer: Wieson
Model Number: ARY118-0167-001-00
MultiTech ordering information:
Model Quantity
ANLTE4V2-1HRA 1
ANLTE4V2-2HRA 2
ANLTE4V2-10HRA 10
ANLTE4V2-50HRA 50
Cellular Antenna Specifications
Category Description
Frequency Range 617-960 MHz
1447-2690 MHz
3300-3800 MHz
Impedance 50 Ohms
VSWR 619-960 MHz: 2.5:1
1447-2690 MHz: 2:1
3300-3800 MHz: 2:1
Peak Gain 619-960 MHz: 1.89 dBi
1447-2690 MHz: 3.95 dBi
3300-3800 MHz: 1.56 dBi
Radiation Omni-directional

ANTENNAS
MultiConnect®Dragonfly TM MTQ-MNG6-B02 Device Guide 15
Category Description
Polarization Linear
Connector SMA(M)

ANTENNAS
16 MultiConnect®Dragonfly TM MTQ-MNG6-B02 Device Guide
SMA to U.FL Cables
The developer kit includes three 4.5" SMA to U.FL cables which are preinstalled on the developer board. Consult
the mechanical drawings for your device to determine which antenna to connect to which U.FL connector on the
device.
Connecting an Antenna through the Developer Board Connectors
To connect an antenna to the device through the developer board:
1. Determine which SMA connector you want to use for the antenna.
2. Finger tighten the antenna to the SMA connector.
3. Attach the U.FL connector from the cable to the connector on the device.
G = GPS
M = Main
OEM Integration
FCC & IC Information to Consumers
The user manual for the consumer must contain the statements required by the following FCC and IC regulations:
47 C.F.R. 15.19(a)(3), 15.21, 15.105 and RSS-Gen Issue 4 Sections 8.3 and 8.4.

ANTENNAS
MultiConnect®Dragonfly TM MTQ-MNG6-B02 Device Guide 17
FCC Grant Notes
The OEM should follow all the grant notes listed below. Otherwise, further testing and device approvals may be
necessary.
FCC Definitions
Portable: (§2.1093) — A portable device is defined as a transmitting device designed to be used so that the
radiating structure(s) of the device is/are within 20 centimeters of the body of the user.
Mobile: (§2.1091) — A mobile device is defined as a transmitting device designed to be used in other than fixed
locations and to generally be used in such a way that a separation distance of at least 20 centimeters is normally
maintained between the transmitter’s radiating structure(s) and the body of the user or nearby persons.
Actual content pending Grant:This device is a mobile device with respect to RF exposure compliance. The
antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all
persons, and must not be collocated or operate in conjunction with any other antenna or transmitter except in
accordance with FCC multi-transmitter product guidelines. Installers and end-users must be provided with specific
information required to satisfy RF exposure compliance for installations and final host devices. (See note under
Grant Limitations.) Compliance of this device in all final host configurations is the responsibility of the Grantee.
Note: Host design configurations constituting a device for portable use (<20 cm from human body) require
separate FCC/IC approval.
Note: Only use antennas approved respectively as listed for the unlicensed radios (Bluetooth/Wi-Fi)
Host Labeling
The following statements are required to be on the host label:
This device contains FCC ID: {Add the FCC ID of the specific device}
This device contains equipment certified under IC ID: {Add the IC ID of the specific device}
For additional labeling requirements, see the product's Labeling Requirements. For the FCC and IC IDs, see specific
certificate information in the Regulatory Information chapter.

SAFETY INFORMATION
18 MultiConnect®Dragonfly TM MTQ-MNG6-B02 Device Guide
Chapter 5 – Safety Information
Handling Precautions
To avoid damage due to the accumulation of static charge use proper precautions, such as an ESD strap, when
handling any cellular device to avoid exposure to electronic discharge during handling and mounting the device.
Radio Frequency (RF) Safety
Due to the possibility of radio frequency (RF) interference, it is important that you follow any special regulations
regarding the use of radio equipment. Follow the safety advice given below.
Operating your device close to other electronic equipment may cause interference if the equipment is
inadequately protected. Observe any warning signs and manufacturers’ recommendations.
Different industries and businesses restrict the use of cellular devices. Respect restrictions on the use of
radio equipment in fuel depots, chemical plants, or where blasting operations are in process. Follow
restrictions for any environment where you operate the device.
Do not place the antenna outdoors.
Switch OFF your wireless device when in an aircraft. Using portable electronic devices in an aircraft may
endanger aircraft operation, disrupt the cellular network, and is illegal. Failing to observe this restriction
may lead to suspension or denial of cellular services to the offender, legal action, or both.
Switch OFF your wireless device when around gasoline or diesel-fuel pumps and before filling your vehicle
with fuel.
Switch OFF your wireless device in hospitals and any other place where medical equipment may be in use.
Sécurité relative aux appareils à radiofréquence (RF)
À cause du risque d'interférences de radiofréquence (RF), il est important de respecter toutes les réglementations
spéciales relatives aux équipements radio. Suivez les conseils de sécurité ci-dessous.
Utiliser l'appareil à proximité d'autres équipements électroniques peut causer des interférences si les
équipements ne sont pas bien protégés. Respectez tous les panneaux d'avertissement et les
recommandations du fabricant.
Certains secteurs industriels et certaines entreprises limitent l'utilisation des appareils cellulaires. Respectez
ces restrictions relatives aux équipements radio dans les dépôts de carburant, dans les usines de produits
chimiques, ou dans les zones où des dynamitages sont en cours. Suivez les restrictions relatives à chaque
type d'environnement où vous utiliserez l'appareil.
Ne placez pas l'antenne en extérieur.
Éteignez votre appareil sans fil dans les avions. L'utilisation d'appareils électroniques portables en avion est
illégale: elle peut fortement perturber le fonctionnement de l'appareil et désactiver le réseau cellulaires. S'il
ne respecte pas cette consigne, le responsable peut voir son accès aux services cellulaires suspendu ou
interdit, peut être poursuivi en justice, ou les deux.
Éteignez votre appareil sans fil à proximité des pompes à essence ou de diesel avant de remplir le réservoir
de votre véhicule de carburant.
Éteignez votre appareil sans fil dans les hôpitaux ou dans toutes les zones où des appareils médicaux sont
susceptibles d'être utilisés.

SAFETY INFORMATION
MultiConnect®Dragonfly TM MTQ-MNG6-B02 Device Guide 19
General Safety
The device is designed for and intended to be used in fixed and mobile applications. Fixed means the device is
physically secured at one location and cannot be easily moved to another location. Mobile means the device is
used in other than fixed locations.
CAUTION: Maintain a separation distance of at least 20 cm (8 inches) between the transmitter’s antenna and
the body of the user or nearby persons. The device is not designed for or intended to be used in portable
applications within 20 cm (8 inches) of the user’s body.
Attention: Maintenir une distance d'au moins 20 cm (8 po) entre l'antenne du récepteur et le corps de
l'utilisateur ou à proximité de personnes. Le modem n'est pas conçu pour, ou destinés à être utilisés dans les
applications portables, moins de 20 cm du corps de l'utilisateur.
Interference with Pacemakers and Other Medical Devices
Potential interference
Radio frequency energy (RF) from cellular devices can interact with some electronic devices. This is
electromagnetic interference (EMI). The FDA helped develop a detailed test method to measure EMI of implanted
cardiac pacemakers and defibrillators from cellular devices. This test method is part of the Association for the
Advancement of Medical Instrumentation (AAMI) standard. This standard allows manufacturers to ensure that
cardiac pacemakers and defibrillators are safe from cellular device EMI.
The FDA continues to monitor cellular devices for interactions with other medical devices. If harmful interference
occurs, the FDA will assess the interference and work to resolve the problem.
Precautions for pacemaker wearers
If EMI occurs, it could affect a pacemaker in one of three ways:
Stop the pacemaker from delivering the stimulating pulses that regulate the heart's rhythm.
Cause the pacemaker to deliver the pulses irregularly.
Cause the pacemaker to ignore the heart's own rhythm and deliver pulses at a fixed rate.
Based on current research, cellular devices do not pose a significant health problem for most pacemaker wearers.
However, people with pacemakers may want to take simple precautions to be sure that their device doesn't cause
a problem.
Keep the device on the opposite side of the body from the pacemaker to add extra distance between the
pacemaker and the device.
Avoid placing a turned-on device next to the pacemaker (for example, don’t carry the device in a shirt or
jacket pocket directly over the pacemaker).
Vehicle Safety
When using your device in a vehicle:
Do not use this device while driving.
Respect national regulations on the use of cellular devices in vehicles.
If incorrectly installed in a vehicle, operating the wireless device could interfere with the vehicle’s
electronics. To avoid such problems, use qualified personnel to install the device. The installer should verify
the vehicle electronics are protected from interference.

SAFETY INFORMATION
20 MultiConnect®Dragonfly TM MTQ-MNG6-B02 Device Guide
Using an alert device to operate a vehicle’s lights or horn is not permitted on public roads.
UL evaluated this device for use in ordinary locations only. UL did NOT evaluate this device for installation in
a vehicle or other outdoor locations. UL Certification does not apply or extend to use in vehicles or outdoor
applications.
Device Maintenance
Do not attempt to disassemble the device. There are no user serviceable parts inside.
When maintaining your device:
Do not misuse the device. Follow instructions on proper operation and only use as intended. Misuse could
make the device inoperable, damage the device and/or other equipment, or harm users.
Do not apply excessive pressure or place unnecessary weight on the device. This could result in damage to
the device or harm to users.
Do not use this device in explosive or hazardous environments unless the model is specifically approved for
such use. The device may cause sparks. Sparks in explosive areas could cause explosion or fire and may
result in property damage, severe injury, and/or death.
Do not expose your device to any extreme environment where the temperature or humidity is high. Such
exposure could result in damage to the device or fire. Refer to the device specifications regarding
recommended operating temperature and humidity.
Do not expose the device to water, rain, or spilled beverages. It is not waterproof. Exposure to liquids could
result in damage to the device.
Using accessories, such as antennas, that MultiTech has not authorized or that are not compliant with the
device's accessory specifications may invalidate the warranty.
If the device is not working properly, contact MultiTech Technical Support.
User Responsibility
Respect all local regulations for operating your wireless device. Use the security features to block unauthorized use
and theft.
End user must operate product per country laws and rules