Multitech MultiModemISI Hybrid Series User manual

MultiModemISI Hybrid Series
Models ISIHP- 2S/2U/4S/4U/4SD
User Guide
All manuals and user guides at all-guides.com
all-guides.com

MultiModemISI Hybrid Model ISIHP-2S/2U/4S4U4SD
User Guide
88311551Revision B
All rights reserved. This publication may not be reproduced, in whole or in part,
without prior expressed written permission from Multi-Tech Systems, Inc. All rights
reserved.
Copyright © 1999 by Multi-Tech Systems, Inc.
Multi-Tech Systems, Inc. makes no representation or warranties with respect to the
contents hereof and specifically disclaims any implied warranties of merchantability
or fitness for any particular purpose. Furthermore, Multi-Tech Systems, Inc.
reserves the right to revise this publication and to make changes from time to time
in the content hereof without obligation of Multi-Tech Systems, Inc., to notify any
person or organization of such revisions or changes.
Record of Revisions
Revision Description
A Manual released. Preliminary (beta) release 3/15/99.
B Data for 4S/4U versions added (11/30/99)
Patents
This product is covered by one or more of the following U.S. Patent Numbers:
5.301.274, 5.309.562, 5.355.365, 5.355.653, 5.452.289, 5.453.986. Other patents
Pending.
Trademarks
The Multi-Tech logo is a registered trademark of Multi-Tech Systems, Inc.
NetWare is a registered trademark of Novell, Inc.
Pentium is a registered trademark of Intel Corporation.
SCO is a registered trademark of Santa Cruz Operation, Inc.
UNIX is a registered trademark of X/Open Company, Ltd.
Windows 95 and Windows NT are registered trademarks of Microsoft.
Multi-Tech Systems, Inc.
2205 Woodale Drive
Mounds View, Minnesota 55112
[phone] or [phone]
Fax [phone]
Tech Support [phone]
Internet Address: http://www.multitech.com
All manuals and user guides at all-guides.com

Contents
Introduction 4
Welcome and Product Description....................................................4
Peripiheral Component Interconnect (PCI) .......................................8
Communication Protocols.................................................................9
Hardware Installation
Introduction ...........................................................................................12
Computer Requirements ........................................................................ 12
Shipping Contents ................................................................................. 12
Safety Warnings ..................................................................................... 12
Hardware Installation Procedure ........................................................... 13
LED Indicators ...................................................................................... 16
Software Installation ....................................................................19
Installing the ISIHP in Windows NT 3.51/4.0 ........................................... 20
Installing TAs and Modems to COM Ports in Windows NT ........... 24
I/O Addresses and IRQ Codes .................................................................... 32
Removing ISIHP Card & Driver in Windows NT 3.51/4.0 ........................ 33
Installing the ISIHP in Windows 95 and Windows 98 ................................ 34
Windows 95 Installation ............................................................................. 34
To Remove the ISIHP Card and Drivers in Windows 95 .......................... 36
Windows 98 Installation ............................................................................. 36
To Remove the ISIHP Card & Drivers in Windows 98 ............................. 39
To Remove the ISIHP Card ............................................................. 39
To Remove the Drivers .................................................................... 39
Installing TAs & Modems to COM Ports in Windows 95 /98 ........ 40
Removing the Driver (Windows 95 only) ........................................ 49
Configuring the Terminal Adapter: Introduction ........................................49
North American Users ........................................................................... 50
International Users ........................................................................... 51
Optional Settings ................................................................................... 51
ISDN TA Configuration Utility .............................................................52
ConfigMenu Configuration Utility ........................................................58
ConfigMenu menus ...............................................................................59
Terminal Adapter AT Commands .......................................................... 60
All manuals and user guides at all-guides.com

Introduction
4 MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD
Welcome to Multi-Techs new MultiModemISI Hybrid Series,
models ISIHP-2S/2U and ISIHP-4S/4U, multiport hybrid ISDN cards
that can be plugged into any PCI slot for applications that involve
ISDN or modem calls over ISDN BRI lines. When the ISIHP is used
with Remote Access Servers (RAS), remote users can call in using
either modems or ISDN terminal adapters (TAs). For V.90 modem
calls, a 56kbps download speed can be achieved without the expense
of T1, E1, or ISDN PRI lines. This manual also describes the ISIHP-
4SD, a serial interface card equipped with four terminal adapters only
(no analog modems are present). The ISIHP-4SD is otherwise like the
ISIHP-4S/4U models. S-models use the ISDN S interface; U-
models use the ISDN U interface.
The ISIHP-2S/2U contains two terminal adapters and four V.90/
K56flex modems. The ISIHP-2S/2U uses two ISDN BRI lines (each
offering two B-channels) to connect to the telco and these connect to
its two built-in terminal adapters. In addition to handling ISDN calls,
each terminal adapter can detect analog modem and fax calls. When
Induction Welcome and Product Description
NetWare Connect (Novell) Driver Installation (2S/2U only) .....................61
Configuring Ports for NetWare Connect .......................................... 61
Removing the Driver (Novell) ......................................................... 61
SCO Open Server 5 Driver Installation ......................................................62
MultiTech Installation Script ........................................................... 63
Activating Ports in SCO Open Server 5........................................... 65
Removing the Driver (SCO Open Server 5) .................................... 67
Linux Driver Installation ............................................................................ 68
Warranty & Service 71
AT Commands and S-Registers
............................................................................................................... 73
Troubleshooting
.............................................................................................................142
Regulatory Info ...........................................................................148
Index ............................................................................................154
All manuals and user guides at all-guides.com

Introduction
MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD 5
analog calls are detected, they are automatically connected to one of
the four V.90 modems on the ISIHP board. In this way, these hybrid
cards can handle either ISDN calls or analog modem calls. Although
the ISIHP-2S/2U contains four ISDN TA ports and four analog
modem ports, only four ports can be active at any one time (because
only four B-channels are present). See Figure 1-1.
The ISIHP-4S/4U works like the ISIHP-2S/2U but contains four
terminal adapters and eight V.90/K56flex modems. The 4S and 4U
models each accommodate four ISDN BRI lines. The configuration of
modem and TA ports for the 4S and 4U models is shown in Figure 1-
2.
The ISIHP-4SD contains four terminal adapters only (the daughter
card containing the eight modems is absent). Since it accommodates
four ISDN BRI lines (each offering two B-channels), it supports eight
independent digital data connections.
Each terminal adapter appears as two ports to the server PC using the
ISIHP card.
ISIHP cards also support dial-out applications via their modems or
terminal adapters.
The ISIHP-2S/2U card offers eight RAS ports using two Basic Rate
Interface (BRI) ISDN lines; the ISIHP-4S/4U has 16 ports using four
BRI ISDN lines. For the ISIHP-2S/2U, its eight ports allow a server
to accept any combination of analog modem and digital ISDN calls,
making a maximum of four simultaneous independent data
connections. For the ISIHP-4S/4U, its sixteen ports allow a server to
accept any combination of analog modem and digital ISDN calls,
making a maximum of eight simultaneous independent data
connections. This arrangement gives the user the flexibility to
customize the settings of the terminal adapters and modems. The
terminal adapters on the ISIHP-4SD can make eight simultaneous
independent connections.
All manuals and user guides at all-guides.com

Introduction
6 MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD
RJ-45 jack
Com Ports
Line 1
Line 2
Modem
Modem
Modem
Modem
TA
TA
7
8
3456
3
4
3456
6
2
1
5ISDN
RJ-45 jack
Figure 1-1: Modems and Terminal Adapters of ISIHP-2S/2U
3456
RJ-45 Jack
TA
Modem
Modem
9
1
2
10
3456
RJ-45 Jack
TA
Modem
Modem
11
3
4
12
3456
RJ-45 Jack
TA
Modem
Modem
13
5
6
14
3456
RJ-45 Jack
TA
Modem
Modem
15
7
8
16
Figure 1-2: Modems and Terminal Adapters of ISIHP-4S/4U (for ISIHP-4SD, no
modems are present)
All manuals and user guides at all-guides.com
all-guides.com

Introduction
MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD 7
From the perspective of the server PC, the ISIHP-2S/2U is an eight-
port serial card with eight devices permanently attached to the serial
ports (Figure 1-1). The first four ports are the two terminal adapters,
each of which appear as two ports. The remaining four ports are the
four central site modems. The following chart summarizes the
correlation of ports and devices.
2S/2U Port # Device ISDN Line Number
1TA 1
2TA 1
3TA 2
4TA 2
5 Modem 1
6 Modem 1
7 Modem 2
8 Modem 2
From the perspective of the server PC, the ISIHP-4S/4U is an sixteen-
port serial card with sixteen devices permanently attached to the serial
ports (Figure 1-2). The first eight ports are the four terminal adapters,
each of which appear as two ports. The remaining eight ports are the
eight central site modems. The following chart summarizes the
correlation of ports and devices. The ISIHP-4SD contains terminal
adapters only; no modems are present.
All manuals and user guides at all-guides.com

Introduction
8 MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD
4S/4U Port # Device ISDN Line Number
1TA 1
2TA 1
3TA 2
4TA 2
5TA 3
6TA 3
7TA 4
8TA 4
9 Modem 1
10 Modem 1
11 Modem 2
12 Modem 2
13 Modem 3
14 Modem 3
15 Modem 4
16 Modem 4
This ISIHP Quick Start Guide contains installation instructions and
technical support information. Because its written for audiences with
basic PC skills, step-by-step instructions for such basic operations as
logging in and file editing are not included.
Peripiheral Component Interconnect (PCI)
First developed by companies such as IntelTM, AT&TTM and Digital
Equipment CorporationTM, the Peripheral Component Interconnect
(PCI) bus used by your ISIHP card provides high performance and is
easy to use. Because PCI devices contain registers with the device
information required for configuration, full auto configuration of PCI
Local Bus add-in boards and components is supported. Performance
factors include a bus data path of 64 bits, clock speeds of 66 MHz,
and bandwidth of 264 Mbs.
All manuals and user guides at all-guides.com

Introduction
MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD 9
Communication Protocols for ISIHP Ports
Ports on the ISIHP card can be associated with different protocols, as
follows:
Auto-Protocol. Modem or terminal adapter automatically negotiates
with host to operate using the hosts current protocol.
Central Site Modem. Common designation for analog modems built
into the ISIHP card. These are V.90 modems. For the ISIHP-2S/2U,
the last four modems should be designated as Central-Site modems;
for the ISIHP-4S/4U, the last eight modems should be designated as
Central-Site modems. (See Port/Device table on previous page.)
MultiLink PPP async. This protocol allows the functional bundling
together of three WAN ports so they function as a single high-
bandwidth data pipeline using only one IP address. Bundling occurs
on demand when the needed bandwidth exceeds that available on a
single circuit.
PPP async. (Point-to Point Protocol, asynchronous) Protocol
allowing computers a dial-up connection to the Internet. PPP includes
error detection, data compression and other improvements over Serial
Line Internet Protocol (SLIP) connections.
V.120. Terminal rate adaptation protocols. These apply to ISDN B-
channels when using a V interface. This protocol includes V.110.
X.75. An international standard that allows X.25 packet-switched
networks to communicate with each other. X.75 is a gateway protocol
for interconnection of X.25 public networks.
All manuals and user guides at all-guides.com

Introduction
10 MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD
All manuals and user guides at all-guides.com

MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD 11
Hardware Installation
Hardware
Installation
All manuals and user guides at all-guides.com
all-guides.com

12 MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD
Hardware Installation
Introduction
This section describes how to install the ISIHP server card into the
PCI bus on your personal computer, which involves
 Opening your PC
 Installing the card into the PC
Computer Requirements
 Pentium-based PC or compatible with PCI bus architecture
 Microsoft Windows 95, Windows 98, Windows NT version 4.0, SCO
Open Server version 5.0, Novell NetWare, or Linux
 At least one floppy drive
 800 blocks of hard disk space for UNIX, 100K bytes for Windows
NT, 34K bytes for Windows 95, 50K bytes for Novell
Shipping Contents
 ISIHP card
 RJ-45 ISDN cords (2 for ISIHP-2S/2U; 4 for ISIHP-4S/4U)
 ISIHP Driver Disk set
 ISDN TA Configuration Wizard disk
 Quick Start Guide
 User Guide (this online manual) on CD-ROM
Safety Warnings
 Never install telephone wiring during a lightning storm.
 Never install telephone jacks in wet locations unless the jacks are
specifically designed for wet locations.
 Never touch uninsulated telephone wires or terminals unless the
telephone line has been disconnected at the network interface.
 Use caution when installing or modifying telephone lines.
 Avoid using a telephone (other than cordless type) during an
electrical storm. There may be a remote risk of electrical shock from
lightning.
All manuals and user guides at all-guides.com

MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD 13
Hardware Installation
 Do not use the telephone to report a gas leak in the vicinity of that
leak.
 Ports that are connected to other apparatus are defined as SELV.
To ensure conformity to EN 41003, ensure that these ports are
connected only to the same type on the other apparatus.
Hardware Installation Procedure
1. Before handling the ISIHP card, discharge any static in your body
by touching a piece of grounded metal such as the computer
chassis.
2. Carefully remove the ISIHP card from its antistatic bag, handling it
only by the mounting bracket and edges. Do not touch the gold-
plated connectors along the bottom edge. (You may want to save
packaging for possible future use.)
3. Visually inspect the ISIHP-2S/2U/4S/4U/4SD. The 2S and 4SD
models have only one daughter card, whereas the others have two.
If you have any concerns about the condition of your ISIHP unit,
call Technical Support at [phone].
All manuals and user guides at all-guides.com

14 MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD
Hardware Installation
Intelligent Serial Interface
Hybrid (ISDN/POTS) Cards
(
Side View )
International
a
a a
a a a
a
aa a
aa
aaa
a a a
a a
a a aa
a a
aa
a a
ISIHP-2S
V.110
Daughter Card
a
a a
a a a a
aa a
aa
aa
a
a a a
a a
a
a aa a a
aa a a a
a
a aa
aa
a a
a a a
a
a a
a a a
a
a a
a a a
a
aa a
aa
aaa
a a a
a a
a a aa
a a
aa
a a
U.S. Domestic
ISIHP-2U
V.110
Daughter Card Modem Card
ISIHP-4S/4U
a
a a
a a a a
aa a aa
aaa
a a a
a a a a aa a a
aa
a a
a
a
a aa
aa
a a
a
a aa
a a a a
a a
a
a
a a a
a a
a a
aa
a
a a
a a a a
a
Modem Card
a
a a
a a a a
aa a
aa
aa
a
a a a
a a
a
a aa a a
aa a a a
a
a aa
V.110
Daughter Card
Figure 1-3: ISIHP Cards; Side View (on ISIHP-4SD, right daughter card is not present)
4. To avoid damaging the ISIHP-2S/2U and your PC, make sure your
computer and any peripheral equipment connected to it are turned
off. The ISIHP-2S/2U can be installed in a Pentium equivalent
PCI bus computer.
5. Remove the cover of your computer as instructed in your
computers documentation.
6. Locate the unused PCI slot you will be using for your ISIHP-2S/2U
card and remove the slot cover according to instructions in your
computers documentation.
7. Install the ISIHP-2S/2U card in the selected expansion slot in the
same manner as any other add-on card according to your
computers documentation.
8. Fasten retaining bracket to computer chassis and replace the cover.
All manuals and user guides at all-guides.com

MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD 15
Hardware Installation
9. Connect the ISIHP-2S/2U to your ISDN telephone wall jack with
the provided modular telephone cable.
NT1
Device
ISIHP
-2S
U Interface S Interface S/T Interface
ISDN line enters
building
Figure 1-4: ISDN Interfaces at Customer Premises
Note: The ISIHP communicates over ISDN lines. If you dont have
a standard modular jack near your computer, you should install
one or have one installed by your telephone company. In the US,
installation kits and adapters are available wherever telephones
are sold.
Note: If S/T-interface ISDN network connection cable is used, the
ISDN phone cord should be connected between the ISDN network
connection cable and the NT1 device. If the S/T-interface model
(ISIHP-2S, -4S, or 4SD) is used, then the S/T-interface must be
connected to the S-interface on the NT1 device.
10. Turn on power to the computer. Now you are ready to install
software.
All manuals and user guides at all-guides.com

16 MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD
Hardware Installation
LED Indicators
The mounting brackets for the four ISIHP cards are similar, but the LEDs
are labeled differently. Below, and on the next page, are graphics for each
bracket along with descriptions of the LED indicators.
ISIHP-4U LEDs (one LED per BRI)
 Flashes between OFF and RED to
indicate that neither SPID for that ISDN
line has been verified.
 Flashes between RED and GREEN to
indicate that one SPID is correct.
 A solid GREEN display indicates that
both SPIDs are correct.
ISIHP-4S/4SD LEDs (one LED per
BRI)
 Solid GREEN indicates normal
operation.
 Flashes between RED and GREEN to
indicate that the device has been reset.
Line 1
1
3
LINE 1
2
4
Line 2
Line 3
Line 4
All manuals and user guides at all-guides.com
all-guides.com

MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD 17
Hardware Installation
LINE 2
B2
B1
LINE 1
B2
B1
ISIHP-2S LED Indicators
B1 LED Indicator
 When lit, indicates active or voice connection on
B-channel 1.
 When lit, indicates active or voice connection on
B-channel 2.
All manuals and user guides at all-guides.com

18 MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD
Hardware Installation
ISIHP-2U LED Indicators
P LED Indicator
 Indicates U interface status connection.
 Controlled by NT-1, which converts S/T
interface (4-wire ISDN) to U interface
(2-wire ISDN).
 When U interface and S/T interface are NOT
active, LED remains off.
 Flashes 8 times/second (8 Hz)U interface
is attempting to activate.
 Flashes once/second (1 Hz)U interface is
active; S/T interface is not fully active.
 Lit, not flashingBoth U and S/T interfaces
are active.
D LED Indicator
 Lights when the ISIHP-2S/2U is turned on.
 Flashes until SPIDs are verified with the
central office switch; then remains lit without
flashing.
 Indicates data link layer status.
LINE 2
P
D
D
LINE 1
P
All manuals and user guides at all-guides.com

Software/Driver Installation
MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD 19
Software
Installation
All manuals and user guides at all-guides.com

Software/Driver Installation (Windows NT)
20 MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD
Installing the ISIHP in Windows NT 3.51/4.0
The following procedure describes how to install the ISIHP card in a
system operating Microsoft Windows NT 3.51 or 4.0 for use with
Remote Access Service (RAS) server and other communications/fax
server type applications. These procedures refer to both 3.51 and 4.0.
1. Install the ISIHP in an available PCI slot as described in the
installation section of this manual.
2. Turn on the computer.
3. Click Start, Settings, Control Panel,and then double-click
Network. In the Network dialog box, click the Adapters tab. Then
click Add.
4. The Select Network Adapter dialog box appears. Click Have
Disk.
All manuals and user guides at all-guides.com