Munchkin MKFE0769-01 User manual

Owner’s Guide
KEEP FOR FUTURE REFERENCE
Please read the instructions carefully before using this product.
CCD-0284-000 REV 1
98° Digital Warmer

Table of Contents
2
IMPORTANT SAFEGUARDS
FCC Information .................................................................................................................................. 3
INCLUDED PARTS
Included Parts.......................................................................................................................................6
Included Adapters................................................................................................................................ 7
HOW TO USE
Maintenance and Cleaning................................................................................................................8
One-Year Limited Warranty .............................................................................................................. 11
Technical Specications..................................................................................................................... 11
CUSTOMER SERVICE
Contact Us ............................................................................................................................................ 11

Important Safeguards
3
Table of Contents
IMPORTANT SAFEGUARDS
WARNING: Strangulation hazard! Keep out
of reach of children. Do not use with extension cords.
When using electrical appliances, basic safety precautions should always be
followed, including the following:
• Read all instructions carefully before using your digital warmer.
• To protect against electrical shock, do not immerse the appliance, cord or plug in water
or any liquid. Clean with damp cloth only. Avoid spillage on the connector.
• For use by adults for intended purposes only. Any other use is inappropriate and
dangerous. Keep out of the reach of children.
• Appliance should be placed on a at and stable area away from hot surfaces.
• Do not let cord hang over edge of table or counter or touch a hot surface.
• Do not move appliance when in use or if it contains hot water or liquid.
• The warming chamber may become hot. Do not touch while in use and let cool
before handling.
• Ensure the baby bottle contents are at a safe temperature before feeding.
• Use plastic baby bottles approved for boiling or glass thermo-resistant baby bottles with
this appliance.
• Do not use this product to heat frozen baby bottles.
• Unplug from outlet when not in use and before cleaning. Allow to cool before putting
on or taking off parts and before cleaning. Allow warmer to cool before cleaning.
• Do not operate any appliance with a damaged cord or plug after the appliance
malfunctions or has been damaged in any manner. Return appliance to Munchkin, Inc.
for examination, repair, or adjustment.
• The use of accessory attachments is not recommended by the appliance manufacturer
and may cause injuries.
• Do not place on or near a hot gas or electric burner, or in a heated oven.
• Always attach plug to appliance rst, then plug cord into the wall outlet. To disconnect,
turn any control to “off” then remove plug from wall outlet.
• To disconnect, always make sure unit is “off” before removing plug from wall outlet.
• Do not use appliance for other than intended use.
• Before serving the contents, unplug cord from wall outlet. Do not leave cord within
child’s reach.
• Close supervision is necessary when any appliance is used by or near children.
• Extreme caution must be used when moving an appliance containing hot liquids.

Important Safeguards
4
• This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety. Children should be supervised to ensure that they
do not play with the appliance.
• A short power-supply cord (or detachable power-supply cord) should be used to reduce
the risk resulting from becoming entangled in or tripping over a longer cord. Longer
detachable power-supply cords or extension cords are available and may be used if care
is exercised in their use. If a longer detachable power-supply cord or extension cord
is used:
a. The marked electrical rating of the cord set or extension cord should be at least
as great as the electrical rating of the appliance.
b. The cord should be arranged so that it will not drape over the countertop or
tabletop where it can be pulled on by children or tripped over unintentionally.
c. If the appliance is of the grounded type, the cord set or extension cord should
be grounding- type 3-wire cord.
• To be used with baby bottles only. May cause serious injury if used with any other vessel.
• The heating element surface is subject to residual heat after use.
• For household use only. Do not use outdoors.
• Do not touch hot surface.
SAVE THESE INSTRUCTIONS
NOTE: These instructions are to be used as a guide only. Please note that there are many
variables, such as size of the baby bottle, ambient temperature, and starting temperature
of the liquid, which can impact the speed as well as the nal temperature at which this unit
warms the liquid. Adjustments to the instructions below may be necessary. Always test
temperature of the liquid with a thermometer before feeding baby. The food should not
be heated for an extended amount of time.

Important Safeguards
5
FCC WARNING
The device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) This device must
accept any interference received, including interference that may cause undesired operation.
WARNING: Changes or modications to this
unit not expressly approved by the party responsible for
compliance could void the user’s authority to operate
the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to connect the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Included AdaptersIncluded Parts
6
INCLUDED PARTS
Power cord
Rubber flap
(on back, not shown)
Warming unit
Digital display
Heating plate
O-ring
Dust cover
Heating plate
Power button

Included Adapters Included Adapters
7
Included Parts
INCLUDED ADAPTERS
B
C
D
Adapter A (with O-ring) for:
•Dr. Brown’s 4oz and 8oz*
• Medela 5oz and 8oz*
• Nuk First Essentials 5oz and 9oz*
• EvenFlo Feeding Classic 4oz and 8oz*
• Parents Choice 5oz and 9oz*
No adapter necessary for:
•Avent Natural 4oz and 9oz*
• Eveno Balance 4oz and 9oz*
WARNING: Do not use glass baby bottle
without an adapter.
Adapter B (with O-ring) for:
•Tommee Tippee 5oz and 9oz*
Adapter C (with O-ring) for:
•Nuk Simply Natural 5oz and 9oz*
Adapter D (with O-ring) for:
•Munchkin Latch 4oz and 8oz*
*Dr. Brown’s, Medela, Nuk, EvenFlo, Parent’s Choice, Tommee Tippee and Avent are trademarks
of their respective owners.

How to Use
8
HOW TO USE
1.Choose the correct adapter for your
baby bottle (see Included Adapters
on page 7).
Ensure the O-rings are installed
in the warming unit and adapter
(at side down).
Screw the adapter into the neck of
the warming unit. If no adapter is
needed, screw bottle directly into
the warming unit.
2.Fill the baby bottle with water
(for formula) or breast milk.
NOTE: For faster results, heat water
before mixing formula.
3.Flip the warming unit upside down
and screw the baby bottle into the
unit or adapter. Twist until the baby
bottle is pressed rmly against the
O-ring to ensure a watertight seal.

How to Use How to Use
9
4.Open the rubber ap on the back of the
warming unit, then insert the power cord.
Plug the cord into an electrical outlet.
5.Turn the warming unit right side up, then
press the power button for two seconds to
start warming. The digital display will turn on.
6.When the liquid reaches 98.6°F, the warming
unit will beep to indicate the cycle is complete.
The liquid will be kept at this temperature for
up to 30 minutes after the cycle is complete.
After the 30 minutes the warming unit will auto
shut off.
NOTE: To ensure your liquid is warmed properly,
wait until the end of the cycle before removing
the bottle.
NOTE: Based on most common standard size 8oz bottle.
7.Flip the warming unit upside down and
unscrew the baby bottle. Always check
the liquid’s temperature before feeding.
Press the power button for two seconds
to turn off the warming unit.
~2 mins
~4 mins
~5 mins
~6.5 mins
~2.5 mins
~5.5 mins
~7 mins
~9 mins
STARTING MILK TEMPERATURE
68°F (20°C) 41°F (5°C)
VOLUME
2oz/60ml
4oz/120ml
6oz/180ml
8oz/240ml

Customer Service
How to Use
10
HOW TO CLEAN
DESCALE
TROUBLESHOOTING
De-scale your Digital Warmer after every use to ensure residual deposits are removed from
the heating plate and the silicon seal. To de-scale, mix 0.5oz. (15ml) of white vinegar with
0.5oz. (15ml) of cold water and pour into the Warming Chamber. Allow liquid to stand in
the unit until any deposits (limescale) have dissolved. Discard liquid and rinse with clear
water, repeat "Clean Cycle" to remove any residual deposits. NOTE: To avoid bacteria
growth perform "Clean Cycle” and “De-Scale” daily. Any other servicing should be
performed by an authorized service representative.
Blinking display: Digital warmer will not operate if tilted more than 30°. Place warmer on
a at surface.
Display “E1": Digital warmer is not responding to input command from the control panel
due to damaged temperature sensor.
Display show " E2": Digital warmer is not responding to input command from the control
panel due to damaged heating element.
Overheat protection: Power switch turn off after three consecutive beeps – circuit protection
detects rapid increase in internal temperature to prevent damage to the device.
Three beeps: Digital warmer will power off due to limescale deposit build up on heating
plate or if milk has not been mixed thoroughly.
Always unplug unit and ensure that it is cool
before cleaning. Do not use scouring pads,
abrasives or solvents for cleaning; they may
damage the appliance and its surface. Place
the rubber plug back into the plug attachment
to prevent water intrusion and cause electrical
short during cleaning.
Digital Warmer: Wipe all surfaces with a damp
cloth or sponge using mild liquid soap, rinse with
clear water. Allow to air-dry. Do not submerge unit
in liquid.
Adapters and O-rings: Wash with mild liquid soap
and rinse with clear water. Allow to air-dry. Always replace O-rings to their proper location
(at side down). Keep Dust Cover on when not in use to keep heating plate clean.

Customer Service Customer Service
11
How to Use
ONEYEAR LIMITED WARRANTY
Munchkin’s 98° Digital Warmer includes a 1-year limited warranty against defects from
the date of purchase. In the event of a malfunction or defect during the in-warranty
period, Munchkin, Inc. at its option, will replace or repair the product under warranty.
Upon receipt of the product and proof of purchase with a valid date of purchase, the
defective part will be immediately repaired or replaced and returned to you free of
charge (USA only). Please send defective unit, proof of purchase and a description of the
problem you have encountered to:
Munchkin, Inc. 7835 Gloria Avenue
Van Nuys, CA 91406, USA
Attn: 98° Digital Warmer Warranty
NOTE: This warranty does not cover misuse, abuse, abnormal wear & tear, negligence,
environmental exposure, alteration or accident. Any alteration or removal of the product
date code invalidates all claims against the manufacture.
CONTACT US
If you have any questions or wish to provide comments about this product, feel free to
contact our Customer Satisfaction team at 1-800-344-2229 (M-TH 8:00am-5:00pm PST,
F 8:00am-1:00pm PST) or visit our website at www.munchkin.com.
TECHNICAL SPECIFICATIONS
• Product name: 98° Digital Warmer
• Model: MKFE0769-01
Electrical Rating:
• Input Voltage: 120VAC, 60Hz,
• Wattage: 110W
• Warming unit dimensions: L3.3”(8.3 cm) x W3” (7.6 cm) x H3.4” (8.5 cm)
• Warming unit net weight: 0.4 lb(198g)
• Safety listings:
• CONFORMS TO UL STD. 1026

© 2020 MUNCHKIN, INC. 7835 GLORIA AVE., VAN NUYS, CA 91406. MADE IN CHINA.