Murata SCA11H User manual

10 April 2017
1Copyright © Murata Manufacturing Co., Ltd. All rights reserved.
BCG Datalog App
Quick Start Guide
v.1.6

2
Copyright © Murata Manufacturing Co., Ltd. All rights reserved.
BCG Datalog Quick Guide (1/2)
1. Use BCG Android Demo Configuration Tool
or manually configure the BCG Sensor Node
(BSN) running mode, calibration, network
settings etc.
-use data logger mode for "raw"
acceleration output (Hex format)
-use BCG for BCG algorithm output
2. Make sure BSN and target device are
connected to target network
3. Start BCG Datalog application
4. BCG Datalog will automatically search and
connect to the first BSN found on target
network (Option to "Cancel" if wrong network
selected) and start displaying the sensor data
on the screen (either raw or algorithm
depending on BSN Running Mode)
5. Press "Start" to start logging to file
1.
3.
4a.
4b.
5.

3
Copyright © Murata Manufacturing Co., Ltd. All rights reserved.
BCG Datalog Quick Guide (2/2)
6. Enter file name and location for logfile
7. Press "Start Logging", logging to file will
start
8. Current file size is visible, press "Stop" to
stop logging
6.
7.
8.
Note: selecting existing file in 6. will not "append" but
"owerwrite" file, i.e old data will be lost
Note: data output in Raw/Logger mode is ~20Mb/hr