MV Heating Ed 1.00 User manual

[phone]
1
MV Heating UK Ltd
MV Digital Timer
Instruction Manual
Ed 1.00
MV Heating UK Ltd
Unit 6
Second Avenue Business Park
Millbrook
Southampton
SO15 0LP
O
K
O
K

[phone]
2
MV Heating UK Ltd
Setting Up the Timer
Changing Language
The default language on the timer is Chinese, to convert to English; plug the
timer into main wiring loom, a flashing symbol will now begin to flash. Press
the power button to continue then navigate to ‘P’ using the right arrow key
and click OK (note: the flashing symbol denotes menu option). Once selected,
‘1’ will start flashing in the top left hand corner of the LCD display. Select using
the ‘OK’ button.
A timer will now appear, change the off to on using the left button and click
‘OK’ approximately 9 times until display screen changes and the ‘1’ is
permanent, navigate to the ‘CLOCK FACE’ and press the navigation buttons
down simultaneously until ‘P1’ appears then click ‘OK’, ‘C1’ will now appear,
confirm by selecting ‘OK’. Then Navigate to ‘02:00off’ by clicking the ‘OK’
button several times, then use the left key to and change to ‘02:00on’, click
‘OK’ to confirm. The power button to exit

[phone]
3
MV Heating UK Ltd
Manual Start Up and Shut Down
For immediate start-up, select the heating icon on the menu (wait for icon to
flash then click ‘OK’), once selected the heater will start up.
To adjust the temperature, simply click the left arrow to decrease heat and
the right arrow to increase heat.
To turn off click the power button.
To switch to thermostatic mode: Hold ‘OK’ down for 3 seconds, adjust
temperature by left or right arrows accordingly. Press power button to exit.
Installation of Control
Find a suitable location for your control. Drill a 16mm hole and insert plugs
through.
Place the sponge adhesive sticker in position and drill a small hole for suitable
for the screw. Secure using the mounting screw and then place screw cover.
Continue the installing with connecting the two 4 hole plugs to the main
wiring harness.
Resetting Digital Controller
Hovering over the clock face on the menu, simultaneously press both
navigation buttons till P1 appears. Using the left arrow key select ‘—01’,
confirm by clicking the ‘OK’ button.