mxr M196 User manual

92503010850revB
M196 A/B BOX

M196 A/B BOX
DESCRIPTION
• Routes instrument signal to two
separate output paths
• Select between two separate
signal paths or run both at the
same time
• Thru jack allows you to connect
to a tuner or amp that receives a
constant signal from your guitar,
unaected by the A/B switches
• Output jacks are terminated to
ground in bypass
• All switching is true hardwire
CONTROLS
INPUT receives
instrument signal
THRU to tuner or sends
constant signal to an amp
OUTPUT A sends instrument
signal to Amp A
OUTPUT B sends instrument
signal to Amp B
FOOTSWITCH A activates
OUTPUT A
FOOTSWITCH B activates
OUTPUT B
DIRECTIONS
• Run a cable from your instrument
to the A/B Box’s Input jack.
• OPTIONAL: If you want to
connect a tuner or have an amp
receive a constant signal from
your instrument, run a cable to
the A/B Box’s Thru jack.
• Run a cable from Amp A to
the A/B Box’s Output A jack,
and another from Amp B to
the Output B jack.
• When both footswitches are
depressed, both signal paths
are active.
SPECIFICATIONS
Switching True hardwire
Current Draw 1.4 mA
Power Supply DC 9 volts
POWER
The MXR A/B BOX is powered
by one 9 volt battery (remove
bottom plate to install), a 9 volt
AC Adapter such as the Dunlop
ECB003/ECB003EU or a power
supply such as the DC Brick™.
DUNLOP MANUFACTURING, INC.
P.O. BOX 846 BENICIA, CA 94510 U.S.A.
TEL: [phone] FAX: [phone]