mxr Super Badass Dynamic O.D. User manual

Super Badass
Dynamic O.D.
The MXR Super Badass Dynamic O.D. will give any
rig as much extra bite as you need while preserving
your existing tonal dynamics. With MOSFET clipping
diodes under the hood, this pedal’s overdrive is a
smooth purr that can be pulled back for a nice, clean
boost or cranked into full gear for vintage high-gain
grind.
M249
jimdunlop.com/m249
®

M249 | MXR®Super Badass®Dynamic O.D. 2
1Footswitch toggles effect on/off (red LED indicates on)
2BOOST/CUT switch sets output mode
3OUTPUT knob adjusts overall output level
4TONE knob adjusts overall EQ
5GAIN knob adjusts overdrive intensity
2
4
5
External Controls
3
1

M249 | MXR®Super Badass®Dynamic O.D. 3
Basic Operation
1. Run an instrument cable from your instrument to the
M249’s INSTRUMENT jack and another instrument cable
from the M249’s AMPLIFIER jack into your amplifier’s
input.
2. Start with knobs set to 12 o’clock.
3. Turn the effect on by depressing the footswitch.
4. Use BOOST/CUT switch to select output mode:
BOOST mode increases output level and emphasizes the
midrange; CUT mode decreases output level.
5. Rotate OUTPUT knob clockwise to increase overall
volume or counterclockwise to decrease it.
6. Rotate TONE knob clockwise for a brighter sound
or counterclockwise for a warmer sound.
7. Rotate GAIN knob clockwise to increase overdrive
intensity or counterclockwise to decrease it.
The MXR®Super Badass®Dynamic O.D. is powered
by one 9-volt battery (accessible via battery door
on bottom plate), a 9-volt AC adapter such as the
Dunlop ECB003/ECB003EU, or an MXR Brick™
Series power supply.
Power Directions

M249 | MXR®Super Badass®Dynamic O.D. 4
Specifications
Input Impedance > 450 kΩ
Output Impedance < 25 kΩ
Bypass True Hardwire
Current Draw 6 mA
Power Supply 9 volts DC