mxr Raw Dawg User manual

Raw Dawg Overdrive
This pedal gives Eric Gales all the seasoning he needs
to serve up some of the tastiest licks in the business.
It’s a classic crunchy OD circuit customized for a more
balanced midrange and a bump in gain, providing a
sweet, organic sound—even when it’s time to crank
up the heat.
EG74
jimdunlop.com/eg74
™

EG74 | Raw Dawg™Overdrive 2
1OUTPUT knob controls overall effect volume
2TONE knob controls overall EQ
3DRIVE knob controls overdrive intensity
4KICKSWITCH toggles effect on/bypass (blue LED indicates on)
External Controls
1
2
3
4

EG74 | Raw Dawg™Overdrive 3
Basic Operation
1. Run an instrument cable from your guitar to the EG74’s
INPUT jack and another instrument cable from the EG74’s
OUTPUT jack into your amplifier’s input.
2. Start with all knobs set to 12 o’clock.
3. Turn the effect on by depressing the footswitch.
4. Rotate OUTPUT knob clockwise to increase overall
volume of effect or counterclockwise to decrease it.
5. Rotate TONE knob clockwise for a brighter sound or
counterclockwise for a warmer sound.
6. Rotate DRIVE knob clockwise to increase amount
overdrive or counterclockwise to decrease it.
The Raw Dawg™Overdrive is powered by the
Dunlop ECB003 9-volt adapter or the DC Brick™ ,
Iso-Brick™ , and Mini Iso-Brick™power supplies.
This pedal cannot be powered by a battery.
Power Directions

EG74 | Raw Dawg™Overdrive 4
Specifications
Input Impedance > 450 kΩ
Output Impedance < 100 Ω
Noise Floor* < -100 dBV
Gain 21 to 47 dB
Bypass True Hardwire
Current Draw 6 mA
Power Requirements 9 VDC
Measurements made at 1 kHz
*All controls at mid-position, A-weighted