MyBinding MINICOMB Quick start guide

MINICOMB Manual Plastic
Comb Binding Machine
Instruction Manual

OPERATIONAL MANUAL
Comb Binding Machine
WARRANTY POLICY
YOUR HAS A WARRANTY OF 2 YEARS FROM
DATE OF PURCHASE. IN THE EVENT OF A MANUFACTUR-
ER’S DEFECT, MY BINDING WILL REPAIR OR REPLACE IT.
IMPORTANT: THIS WARRANTY DOES NOT COVER DAMAG-
ES DUE TO IMPROPER USE OR MISTREATMENT OF THE
UNIT, INCLUDING EXTRAORDINARY EVENT LEADING TO
THE DAMAGE OF THE MACHINE, WHETHER IT IS REVERS-
IBLE OR NOT.
MINICOMB
Punching Capacity
Binding Capacity
Number of Holes
Format
Depth Margin
Side Margin Guide
Machine Dimensions
Weight & Volume
Warranty
15" x 10.5" x 5"
11.5 lbs & 0.41 CbFt
2 Years
Specifications
10 sheets (20 lb paper) or
2 sheets of plastic covers
250 sheets (20 lb paper)
19 Holes
Letter
Adjustable
Adjustable
1-800-944-4573

ASSEMBLY
PUNCHING
BINDING
1) Place your on top of a sturdy table.
2) Install Punch Handle and tighten screw.
FEATURES
Punch Handle
Depth
Margin
Guide
Side Margin Guide
Waste Drawer
(below machine)
Paper
Entrance
12
3
1. Use Depth Margin Guide to set the preferred punching margin.
2. Move the Side Margin Guide to center the holes on your documents.
3. Insert the documents (10 sheets of 20lb paper max) and press down on
the Punch Handle to punch holes, then release back to original position.
Repeat Step 3 as needed.
4. Place the comb on the comb opener and push the Punch Handle back
to open the comb.
5. Insert punched documents into the opened comb (not pictured).
6. Move the Punch Handle forward to close the comb. You now have a
comb bound book.
46
Comb Opener