mychway MS-6651 User manual

- 2 -
Warning
Dear users:
Thanks for choosing our company’s product, in order to fully make use of the products, we
sincerely suggest follow:
◆◆Please read the instruction in detail and keep it well for further reading and consulting.
◆◆Please follow the instruction to fit and operate the machine correctly.
◆◆Please do not remove and change any accessories of the machine.
◆◆It forbids others others to open and remove the mainframe except the authorized people in
the company.
◆◆It forbids others to change and maintain the machine except the professional people.
◆◆Please contact us if there is any trouble during operation.
After Sale service
◆We offer ONE YEAR warranty. Within warranty period, all exchanges or replacement due to
defects are free. (Buyer is responsible for shipping charges).
If the machine is over warranty, please also do not hesitate to contact us. we will assure you of
our best service all the time.
◆How to contact us?
Phone:[phone]
Tel: [phone]
Email: [e-mail]
This product does not belong to medical,please don’t use for disease treatment!

- 3 -
1. Introduction to Manual
1.1 Purpose
This instructions for use manual provides a description of the system components, its
controls and displays, instructions for its operation, and other equipment information
important to the user
Warning: Do Not operate this machine before reading this manual thoroughly. In
addition to this manual,additional clinical training may be available by the company
or your local distributor.
For more information on training available please contact your local representative.
1.2 Conventions
Note: Notes designate information of special interest.
Caution: Cautions alert the user to precautionary steps necessary to properly
operate the system.Failure to observe these cautions may void the warranty
Warning: Warnings alert the user to information that is of the highest importance
and vital to the safety of the patient and user
All procedures are broken down by numbered steps.Steps must be completed in the sequence
they are presented
Bulleted lists indicate general information about a particular function or procedure.They do not
imply a sequential procedure.
Control names are spelled as they are on the system,and they appear in Bold text
2. Contraindication Safety
1. People with heart disease, high blood pressure, or configured cardiac Pacemaker.
2. People with acute inflammation, asthma, deep vein thrombosis, thyroncus, cancer.
3. People with hemorrhagic diseases, trauma or who is bleeding.
4. Pregnant women
5. Medical plastic artificial or metal parts inside the body such as metal teeth or
silicone breast implants.
6. People with abnormal immune system.
7. People with numb or insensitive to heat.
8. If you are feeling unwell, Prohibited in the ears, nose, eye throat and do not use this
device in advance and tell your doctor.
9. Children under 12 years old are not allowed.

- 4 -
3. Treatment Safety
1. Treatment Time is less than 30mins/Body Part/Each Treatment.
2. The energy setting is from low to high gradually which should be subject to skin
comfortableness for different people.
3. The patient had better wear the protective eye glasses.
4. If you cannot tolerant heat or uncomfortable, please stop the treatment in advance
and turn to your doctor for help.
5. Installment and Use
I .Working Condition
Using at normal temperatures and pressure. Please do not stay in too cold, too hot, too
dry and too wet.
II. Technical Parameters
Power supply Input:100V-240V
Power :180W
Unoisetion Probe:
Power supply output:150V
Frequency:40KHz
Power:25W
Sextupolar Vacuum 3D SMART RF for body
Power supply output:66V
Freqeuncy:3MHz
Power:30W
Octupole 3D SMART RF for body
Power supply output:66V
Freqeuncy:3MHz
Power:30W
Quadrupole 3D SMART RF head for Arm/face/small area of body
Power supply output:66V
Freqeuncy:3MHz
Power:30W

- 5 -
Bipolar 3D SMART RF for face and eyes
Power supply output:66V
Freqeuncy:3MHz
Power:30W
Cryo Cooling head:
Power supply output:66V
Tempreture:5 ℃- 0 ℃
Power:35W
Red Wavelength:650 - 730 nm
IV.How to install the accessories?
A =Cooling head Socket
B=Bipolar 3D RF Socket
C=Quadrupolar 3D RF Socket
D=Eightpolar 3D RF Socket
E=Sextupolar Vacuum 3D Smart RF Socket
F=Unoisetion Cavitation Socket
G=Suction adjusting
I=Power Supply input Socket
H=ON/OFF Button
J=Filter
Connect all heads to machine before turn on machine .

- 6 -
Attention:please add water inside machine before turn on machine ,otherwise it will burned
machine .when you add water , remember connect Cooling head with machine .
Also please clear it dry after you filling water ,just in case it has water around machine.
V Program Setting
1. Use the red power button to start the machine, the screen will show “Welcome”.

- 7 -
2.Click any place of the screen to enter into the main interface.
A:40K Cavitation
1. Press button to enter into 40k unoisetion function display as
follow:

- 8 -
2. Please click to set working time.
3. Please click to increase or decrease the ENERGY
4. Please click to chose working model.
5. Please click to start or pause function.
6. Please click to come back to the main function interface.
B. Sextupolar Vacuum &RF
1 Press button to enter into Body RF Vacuum operation display as
bellow:

- 9 -
2. Please click to set working time.
3. Please click to increase or decrease the RF ENERGY.
4. Please click and to set the time for
the suction and release.
5. Please click M1, M2, M3, M4,M5 to choose
the model.
6. Please click to start or pause function.
7. Please click to come back to the main function interface.
C. Eightpolar 3D RF

- 10 -
1. Press button then login BODY RF operation display as bellow:
2. Please click to set working time.
3. Please click to increase or decrease the RF ENERGY.
4. Please click to start or pause function.
5. Please click to come back to the main function interface.
D. Quadrupolar 3D RF

- 11 -
1. Press button then login Face Radio Frequency operation display
2.Please Click to choose Function of head .
3. Please click to set working time.
4. Please click to increase or decrease the ENERGY.
5 Please click to start or pause function.
6. Please click to come back to the main function interface.

- 12 -
E. Eye Radio Frequency
1. Press button then login Eye Radio Frequency operation display.
2. Please click to set working time.
3. Please click to increase or decrease the RF ENERGY.
4. Please click to start or pause function.
5. Please click to come back to the main function interface.
F:Cooling Head
1. Press button then login Cooling head operation display.

- 13 -
2.Please click to set working time .
3.The temperature of cooling head is 0~5.
4. Please click to start or pause function.
5. Please click to come back to the main function interface.
About Treatment
1）Abdomen, thigh, buttock, arms slimming
Please clean the skin and then put the ultrasound gel on the treatment area, then turn
on the machine, set the time and energy. Please set the energy from low to high to get

- 14 -
the best comfortable temperature, then follow this steps:
1. Use the Body RF head 5 mins.
2. Use the unoisetion 40k cavitation head 20-25mins.
3. Use the RF Vacuum head 10-15mins.
4. Use the Body RF head 15~20 mins.
5.Use the Cooling head 10-15mins.
Work time: 2-3 times/ week
2）Face, eyes around, neck skin lifting:
Please clean the skin and then put the rf gel on the treatment area, then turn on the machine , set
the time and energy, pls set the energy from low to high to get the best comfortable temperature,
then follow this steps:
1. Use face radio frequency head for face for 15-20 min
2. Use eye radio frequency head for eye around for 10-15min
Work time: 2-3 times/ week
BUTTOCKS
ILLUSTRATIN of OPERATION
FACE
Treated time: 30 minutes
Massage the mandible center in circles to produce deep heat.
2. Massage lower jaw in lines.

- 15 -
3. Massage the triangle zone of both sides of the face in circles.
4. Massage from jaw to angulus oris to ear in lines.
THIGH
Treated time: 30 minutes
1. From down to upper, pushing to the groin to dredge the lymph.
2. From down to upper, circling push by anticlockwise can help decomposing
fatness.
3. Also can push by come-and-go to decompose fatness.
4. Pull from the knee and muscle texture to upper, can improve the curve.

- 16 -
Treated time: 20 to 30 minutes
1. Along the lymph direction, pulling to the waist.
2. From upper to down, by anticlockwise gesture, pull come-and-go.
3. Along the muscle of arm, pull up to lift and tight the muscle.
BACK
Treated time: 20 to 30 minutes
1. First by come-and-go, pushing the bladder nerve 2 to 3 times.
2. Circling by anticlockwise to stimulate the underarm lymph node.
3. On the back, by anticlockwise circling, can help to decompose the
fatness.

- 17 -
4. Using lymph drainage gesture, pull the toxin to the lymph node, can help
improving the back curve.

- 18 -

- 19 -
Package Listing :
1 x Main Machine
1 x Unoisetion Probe
1 x Sextupolar Vacuum 3D SMART Probe RF for Body Slimming
1 x Octupole 3D SMART RF Probe for Body Sculpture
1 x Quadrupole 3DSMART RF Probe for Arm/face/small area of body
1 x Bipolar 3D SMART RF Probe for face and eyes
1 x Cooling head
1 x Holder
1 x Power Supply Cord ( Both 110v and 220v voltage (frequency: 50/60Hz) version are available. Also we stock
the USA, UK, AU, EU plug to suit for the country all over the world.)

- 20 -
Cleaning and Care :
1.Please clear each handle after one treatment .since there has many Gel on head during treatment .
2.Please change water every one week .
3.Please clear filter once you see dirty thing inside it .
4.Conservation methods:a cool dark dry preservation.