mychway HR-P808S User manual

User Manual
HR-P808S

Preface
Dear Users:
We’re pleased to present to you Pro Diode Laser 808nm
Permanent Hair Removal Fast Painless Laser Beauty Machine. It
works on removing hair permanently without damaging any skin
tissues. It adopts the primary principle of selective
photothermolysis by causing localized damage on target area of
unwanted hair without damaging the rest of the skin. We aim at
a safe and, at the same time, effective beauty result by using
high-end technologies. Pro Diode Laser 808nm Permanent Hair
Removal Fast Painless Laser Beauty Machine is for professional
use only, which needs to be handled by professionals with
proper training. Any improper use will result in adverse
consequences. Therefore we advise any personnel read this
guide thoroughly and apply with the instructions strictly before
operation.
We believe our quality product will bring in good returns on your
end. Also, you can count on our worry-free after-sales service.
Thank you!

Table of Contents
Preface
Part I
Brief Introduction
Advantages
Working Principles
Full-body Hair Removal
Part II
1. Detailed Operations
2. Technical Parameters
3. Safety Precautions
4. Dos and Don’ts
5. Troubleshooting & Solutions
6. FAQs
7. Packing List
8. Operational Diagrams

Part I
Brief Introduction
Pro Diode Laser 808nm Permanent Hair Removal Fast Painless Laser Beauty Machine
works on removing unwanted hair on limbs, underarms, chest, back, mouth, abdomen,
neck, hairline, and bikini line and brighten and rejuvenate skin. It applies with the
theory of ergonomics in design so that it not only saves effort when using but also
comes with better and more visible effects. Laser hair removal machines are currently
the most popular hair removal machines on the market, which make them good
replacement of hair removal through chemical or physical means in beauty parlors.
We aim at a safe and, at the same time, effective beauty result by using high-end
technologies. What’s more,no injection, medication, or surgery is required. It also has
no side effects and has immediate results. The entire process is conducted externally.
Pro 808 adopts the primary feature of selective photothermolysis, achieving perfect
results of hair removal without damaging skin epidermis by using the sapphire cooling
technology.
Advantages
1. Wide treatment area, high efficiency, and fast speed.
2. Efficiently remove hair of different color and texture(e.g.brown, dark brown, black).
3. Non-invasive treatment with higher level of safety.
4. No injection, no medication, no side effects and fast result.
5. Cooling down to 4℃; without pain.
6. Target on hair of different colors; more visible results with fine hair.
7. No downtime: no effect on daily life and work.
8. Remove hair permanently.
Working Principle
Laser hair removal adopts the working principle of photothermal dynamics. Laser
waves travel into the root of hair follicles through epidermis, where pigment in the
follicles absorb the light and transform to heat to destroy hair in its anagen period wile
leaving the surrounding skin undamaged.
Laser hair removal is the perfect combination of hair removal in any technical
perspective. Firstly, the sapphire cooling technology protects the epidermis from
damaging while at the same time transports highly concentrated light into hair
follicles; secondly, adjustable pulse duration(pulse width) can make sure the targeted
cells produce enough heat to solidify without affecting surrounding cells; thirdly, the
proper energy density level can guarantee there’s enough energy output to destroy

cells while leaving the neighboring cells intact.
Full-body Hair Removal
Main Effects
1. Remove unwanted hair on limbs.
2. Adjust hairline on forehead and neck.
3. Remove fine hair on chest and back.
4. Remove facial fine hair, smooth skin.
5. Remove hair around mouth and chin.
Applicable Range
1. Those with excessive hair growth on limbs.
2. Those with unwanted hairline on forehead.
3. Those with unwanted hairline on neck.
4. Those with excessive hair growth around mouth and chin.
5. Those with excessive hair growth on face and uneven skin tone.
6. Those with excessive hair growth on body and private parts.
Inapplicable Range
1. Those in pregnancy and lactation; those with heart disease, malignant tumor,
folliculitis, vascular disease, severe hyperlipidemia, hypertension, hyperglycemia, and
other serious diseases.
2. Those with abnormal metabolism of collagen cells, including history of scar and
poor wound healing.
3. Those with infected treatment area, herpes simplex, and skin lesion, etc.
4. Those who have just undergone plastic surgery with unhealed wounds.
5. Those who are having allergic reactions.
6. Those with pacemakers.
7. Those who are photosensitive (solar urticaria, lupus erythematosus), and
experience swelling, itch and redness when exposed under the sun.
8. Those who have just undergone photoelectric therapy in 30 days.
9. Those who are in their childhood,not yet hit puberty or under 18.
Notes after Operation
1. No contact with hot water on treatment area in 6 hours.
2. Avoid sauna, hot spring and swimming in 7 days.
3. If redness appear on face, wait for 1 day before applying make-ups.

4. Use sun protection, such as sunscreen or umbrella after treatment.
5. Avoid applying any products that contain irritating ingredients(e.g.alcohol, acid) on
body and limbs in 3 days.
Part II
1. Detailed Operation
Power Socket
Power Switch
Energy Level Range:
Body Parts
Energy（A）
Optical
Efficiency（HZ）
Time（ms）
Underarms
25~35
5~10
10
Arms
28~45
8~12
25
Legs
28~40
8~12
30
Mouth,Chin
30~40
5~10
10
Inflow
Outflow
Overflow

Face
28~35
5~10
15
Hairline
25~35
5~10
15
Bikini line
25~35
8~10
15
Other parts
30~45
8~12
20
Note: The above data are for reference only and they could be
adjusted subjecting to clients’ comfort level to avoid scald.
Warning: Avoid using device on the following treatment areas: moles, tattoos, large
dark spots, metals (including dental braces), and facial prosthesis.
After checking that the instrument is connected properly, the following starting
interface will appear when the power supply is turned on.

1. Function Selection
Skin type I: very fair
Skin type II: fair
Skin type III: light

Skin type IV: warm Ivory
Skin type V: medium/neutral
Skin type VI: dark/ dark brown
Skin Type Selection

Hair color: light brown
Hair color: Brown
Hair color: dark brown
Hair color: black
The following interface will appear after choosing skin tone and hair color.

Current Counter
Total Counter
Flow&Temperature
Ready/Standby
Cooling level(0-5): Adjust the level subjecting to your own comfort

level. For those who prefer an icy feeling can choose cooling level 4-5.
Current Adjustment (max.100): Adjust the
current subjecting to one’s tolerance and hair choice. Choose around 20 for those
with low tolerance; choose around 35 for those who have thin hair and light hair color;
choose around 25-30 for those who have thick hair and dark hair color.)
Frequency Adjustment: The frequency of light
can be adjusted subjecting to one’s tolerance level. The suggested frequency is 3-6 for
beginners.)
Pulse duration: pulse duration can be adjusted
according to the time period of treatment.
Return
2. Technical Parameters
Light sources: Diode (continuous wave)
Laser wavelength: 808nm
Spot size: 12x12mm/12x20mm
Energy density: 10-120J/cm2 (continuous adjustable)
Pulse width: 20-1000ms (continuous adjustable)
Repetition frequency: 1-10HZ
Head treatment temperature: 0~4℃
Cooling system: sealed inner circled water cooling system
output power: 2200w
power supply: 110V±20%(50Hz), 220V±20%(50Hz)

3. Safety Precautions
1. Those in pregnancy and lactation; those with heart disease, malignant tumor,
folliculitis, vascular disease, severe hyperlipidemia, hypertension, hyperglycemia, and
other serious diseases.
2. Those with severe varicosities or rumors.
3. Those with sensitive skin or who are photosensitive.
4. Avoid wearing jewelries that contain metals during the process.
5. Those who are in their childhood,not yet hit puberty or under 18.
6. Avoid using the device around areas that contain metal, plastic or silicon, etc.
7. Those with abnormal metabolism of collagen cells, including history of scar and
poor wound healing.
8. Those with infected treatment area, herpes simplex, and skin lesion, etc.
4. Cautions after Treatment
1. Avoid using device on the following treatment areas: moles, tattoos, large dark
spots, metals (including dental braces), and facial prosthesis.
2. Avoid staying on one spot for too long in case of scald.
3. Keep probe close to the skin to avoid any discomfort.
4. Avoid wearing jewelry or other accessories that contain metals.
5. Wait for a month before treatment if the same area had undergone photoelectric
therapy within a month.
6. Wait for 15 days if you have recently experienced sunburn or planning a vacation
containing sun bathing.
7. It is advised not to use the device for people with black skin color owing to the
larger amount of melanin will absorb more laser light, which might damage skin.
8. Avoid using the device on eyebrows or eyelashes.
9. Turn off the device for 5-10 minutes if it’s been on for 2 consecutive hours to
further prolong it’s life expectancy.
10. Place the device wherein it’s cool,dry and ventilated; avoid direct sunlight, high
temperature or water splash.
11. Wipe clean the device and handle with saline after one treatment to further
prolong it’s life expectancy. (Do not use alcohol for cleaning.)
12. Make sure to press the power button and unplug the device.
13. Fill in the water tank with water before turning on the device.
14. Avoid aiming light directly at the eyes.
5. Troubleshooting & Solutions
1. Power does not turn on and the key lamp on the back of the device doesn't work?
A. Ensure that the power cord is connected to a working power outlet.

B. Ensure the fuse tube on the back of the instrument is not loose or being burnt.
C. Check if the emergency stop machine is on.
2.Handpiece is emitting heat?
A.It is normal for the laser radiates light and heat from the handpiece.
3.There’s no light coming form the handpiece?
A.Check if the parameters are set at proper level and if the device is turned on.
B.Turn off the device and restart.
4.There’s unpleasant odor coming from the handpiece?
A.Check if the probe is clean or if there’s hair residue.
B.Wipe the probe clean.
6. FAQs
1. Q: Can I remove hair permanently with one treatment?
A: No, however it can be achieved with one full course of treatment. It is advised to do
it once every 3-6 weeks (time span varies among different parts of the body). Hair
growth consists of 3 periods, namely anagen, catagen and telogen phase. Hair
removal works best during anagen phase. Owing to the fact that time span of hair
growth varies among different parts of the body, and that’s why we’ll provide you with
a customized treatment plan according to your hair growth, hair density on different
parts of the body.
2.Q: Is it harmful to skin?
A: You can be reassured that it is without harm. It’s working principle is selective
photothermolysis, which means that laser wave of 808nm only works on melanin of
follicles without damaging other cells.(In another word, 808nm wave absorbs only
melanin in hair follicles while there’s no melanin around neighboring skin cells,
therefore no harm will be done.)
3.Q:Is hair going to appear darker?
A: After the laser hair removal treatment, the remaining hair will appear finer and
lighter, instead of the opposite. While for those who choose waxing, plucking, scraping
or hair removal cream, hair will appear darker, thicker and harder after long term
usage.
4.Q:Does laser hair removal work on anyone?
A: Despite of its wide application range, it does not apply to everyone. Those who
have the following conditions should avoid such treatment:
1. Those who have a medical history of scars and lumps.
2. Those who are currently or previously affected with herpes simplex virus.

3. Those who have tried hair removal using other methods within 6 weeks.
4. Those who are allergic to benzodiazepines and bleach.
5. Those who are prone to allergies.
5.Q:Is there a good season for hair removal?
A:Generally speaking, Pro 808nm laser hair removal leaves no scar, and requires no
recovery time, which means it could be done any time of the year. But it does take
multiple treatments, so it is advised to do it as early as possible so that you can look
gorgeous without worries.
6.Q:Can I go sun bathing right after hair removal treatment?
A:It is advised not to because cuticles will shed together with hair follicles, in which
case skin protection level is relatively low.
7. Packing List
1x Main Machine
1x Handpiece
1x Accessory Rack
1x Water Funnel
8.Operational Diagrams
Parameters
Product
Techniques
Diagrams
Facial Hair Removal: 40 min, once/month
Energy:28~35
Frequency:5~10
Time:15
Makeup
remover+
Cleanser+
Toner+
Razor+
Gel
1. Remove makeup and
clean, 5 min.
2. Apply toner, 1min.
3. Shave off all the facial
thin hair with razor, 2-3
min.
4. Apply a layer of gel
that is the thickness of a
coin evenly on the face, 1
min.
No diagrams

5. Put on protective
eyewear for the
customer; the operator
should wear protective
goggles too.
6. Adjust energy,
frequency, time and start
operation.
7. Device operation: Start
from chin, move the
probe upward towards
forehead using stamp
technique to cover the
whole face, 3-4 times.
8. Do the same on the
other side.
9. Remove the protective
eyewear.
10.Scrape off the gel and
wash face clean.
11.Wash face clean, 2
min.
12.Apply toner, essence,
cream and sunscreen.
Suggested Treatment:
No obvious changes will be observed after just one treatment. After 2-3 times, hair
growth rate slows down, and hair appears to be finer. Obvious decrease of hair
regrowth is appeared after 4-6 times, especially at densely hair area. 7-10 treatments
brings you hair-free experience. Touch-up treatments can be conducted for
consolidating the results.
Full-body Hair Removal: 150 min, once/month
Energy Level:
Arms:28~45
Underarms:25~35
Legs:28~40
Frequency:
Arms: 8~12
Underarms:5~10
Legs:8~12
Razor+
Gel
Arms
1. Shave arm: shape hair
on arms and fingers with
razor.
2. Apply a layer of gel
that is the thickness of a
coin evenly on one arm.
3. Put on protective
eyewear for the
customer; the operator
No diagrams

Time:
Arms: 25
Underarms:10
Legs:30
should wear protective
goggles too.
4. Adjust energy and
other parameters, and
start operation.
5. Device operation: start
from upper arm, using
stamp technique to cover
the whole arm, 1 time.
6. Move slowly from
upper arm to lower arm
in lines with one line next
to another, 2-3 times.
7. Scrape off the gel and
wipe it clean with paper
tissue.
8. Apply gel evenly on
fingers, 1 min.
9. Device operation: use
stamp technique to
operate on fingers, 3-5
times.
10. Scrape off the gel and
wipe it clean with paper
tissue.
11. Do the same on the
other side.
Underarms
12. Shave underarm:
shape hair of underarm
and fingers with razor.
13. Apply a layer of gel
that is the thickness of a
coin evenly on underarm.
14. Device operation:
Use stamp technique to
cover the whole
underarm, 1 time.
15. Move along the
entire underarm, 2-3
times.
16. Scrape off the gel and
wipe it clean with paper

tissue.
17. Do the same on the
other side.
Legs
18. Shave legs: shape hair
on legs and tones with
razor.
19. Apply a layer of gel
that is the thickness of a
coin evenly on one leg.
20. Device operation:
Move from thigh to calf,
using stamp technique to
cover the entire leg, 1
time.
21. Move slowly from
thigh to calf in lines with
one line next to another,
2-3 times.
22. Scrape off the gel and
wipe it clean with paper
tissue.
23. Apply gel evenly on
toes, 1 min.
24. Device operation:
Use stamp technique to
operate on toes, 3-5
times.
25. Wipe gel off with
paper tissue.
26. Do the same on the
other side.
Suggested Treatment:
No obvious changes will be observed after just one treatment. After 2-3 times, hair
growth rate slows down, and hair appears to be finer. Obvious decrease of hair
regrowth is appeared after 4-6 times, especially at densely hair area. 7-10 treatments
brings you hair-free experience. Touch-up treatments can be conducted for
consolidating the results.