MYDLINK DCH-B112 User manual

Quick Installation Guide
快速入門指南
Smart Door/Window Sensor
DCH-B112

3
DC H-B112
ENGLISH
Smart Door/Window Sensor
Double-sided Tape Pieces
CR2 Battery
Quick Installation Guide

DC H-B112
4
ENGLISH
mydlink
Download the App
1
Search for mydlink and download the app.
Note: This product is incompatible with other mydlink
apps such as‘mydlink Home,’ ‘mydlink Lite,’etc.

5
DC H-B112
ENGLISH
Log In
2
Sign In or Sign Up for a mydlink account.
mydlink Lite users may sign in with the same
account.

DC H-B112
6
ENGLISH
Set Up Your Hub
3
Follow the instructions provided for your
hub and ensure it is set up and functioning
properly. Set up your device with your Smart
Hub nearby.
For more information on mydlink Smart DIY visit:
dlink.com/SmartDIY

7
DC H-B112
ENGLISH
Add The Device
4
Tap the menu button then tap Add a
Device.Scan the Setup Code on the bottom of
the device, then follow the app instructions.

DC H-B112
8
ENGLISH
Mounting
1/
Peel the stickers off the
backs of the double-sided
tape pieces attached to
Main Sensor Unit and the
Magnetic Trigger.
Please ensure that the
alignment notches are
aligned and that the two
units are no more than
20 mm apart.
2/
Press the units down firmly
on the surfaces you wish to
mount them on, ensuring
that they stay attached.
Mount it on a clean, smooth
surface, avoiding moist
areas.
3/
5

9
DC H-B112
ENGLISH
Device Information
i
Status LED
Reset /
Bypass Button
Main Sensor Unit Magnetic Trigger
Alignment
Notches
Waiting for pair
LED Behavior
1s
0.2s Successfully reset
(3 times) Sensor triggered
Successfully paired to the hub
Power saving mode
1s
10s

DC H-B112
10
ENGLISH
iDevice Information
How to activate bypass mode:
Press the bypass button when the window or door
is closed, then open the window or door within 1
minute. If the window or door remains closed after
pressing the bypass button, then bypass mode will
not be activated.
Note: Bypass mode will deactivate when the window
or door is closed or remains open for over 5 minutes.
Bypass Button

11
DC H-B112
ENGLISH
FAQ
?
What do I do if my device is not working properly?
Reset the device and reinstall it. To reset your device, press and hold the
Reset/Bypass button until the LED blinks red.
During installation, ensure that:
• you have an Internet connection on your router
• your router’s Wi-Fi is on
• your mobile device is connected to your home network
• your mydlink Smart DIY hub* is connected to the Internet
Why is my sensor not triggering?
The Smart Door/Window Sensor is designed to sense contact between
the Main Sensor Unit and the Magnetic Trigger. When separated
enough it will be triggered. Please ensure that the alignment notches
are aligned and that the two units are no more than 2 millimeters apart.
How do I replace the battery?
Remove the battery cover of the Main Sensor Unit by sliding down the
cover from the back of the unit to release the latch.
Slide the cover down
* Requires a mydlink Smart DIY hub device.

DC H-B112
12
ENGLISH
Support
Australia:
Tel: [phone]
24/7 Technical Support
Web: http://www.dlink.com.au
E-mail: [e-mail]
India:
Tel: [phone] or 1860-233-3999
Web: www.dlink.co.in
E-Mail: [email protected]
Singapore, Thailand, Indonesia,
Malaysia, Philippines, Vietnam:
Singapore - www.dlink.com.sg
Thailand - www.dlink.co.th
Indonesia - www.dlink.co.id
Malaysia - www.dlink.com.my
Philippines - www.dlink.com.ph
Vietnam - www.dlink.com.vn
New Zealand:
Tel: [phone]
24/7 Technical Support
Web: http://www.dlink.co.nz
E-mail: [e-mail]
South Africa and Sub Sahara Region:
Tel: [phone]
08600 DLINK (for South Africa only)
Monday to Friday 8:30am to 9:00pm
South Africa Time
Web: http://www.d-link.co.za
E-mail: [email protected].com
D-Link Middle East
Dubai, U.A.E.
Tel: [phone]
Fax: [phone]
Technical Support: [phone]
General Inquiries: [email protected]
Tech Support: [email protected].
com
Egypt:
Technical Support Call Center: +20 2258
66777
General Inquiries: [email protected]
Tech Support : [email protected].
com
Kingdom of Saudi Arabia:
Technical Support:
[phone]
General Inquiries: [email protected]
Tech Support: [email protected]
Pakistan:
Technical Support: [phone],
34305069
General Inquiries: [email protected]
Tech Support: [email protected]
Morocco:
Phone office: [phone]
Email: [email protected]
Bahrain:
Technical Support: [phone]
Tech Support: [email protected].
com
Kuwait:
Tech Support: [email protected]

13
DC H-B112
中
文
門窗感應器
使用雙面膠安裝壁掛
快速安裝手冊
CR2 電池

DC H-B112
14
中
文mydlink
下載 App
1
搜尋 mydlink 並且下載
注意: 本產品僅適用於 mydlink，不適用
於‘mydlink Home’，‘mydlink Lite’等

15
DC H-B112
中
文
2
登入或是註冊 mydlink 帳號，mydlink 用戶可
使用現有帳號密碼登入
登入

DC H-B112
16
中
文
3
依據閘道器提供的說明進行操作，確保設備可
正常使用。
更多資訊請上官網查詢：
dlink.com/SmartDIY
設定您的閘道器

17
DC H-B112
中
文
4
點選主頁 點選新增裝置
掃描在設備上的Setup Code再依據App
引導開始安裝
新增裝置

DC H-B112
18
中
文
請確實將凹槽對齊並且
兩個設備之間的距離不
超過0.079英吋(0.2公分)
將裝置牢固地按壓在要
安裝位置的表面上，確
實他們可連接，並且將
設備安裝在乾淨、光滑
並且避免潮濕的區域
請將主感應器和磁性觸
發器背面的雙面膠撕下
1/
2/
3/
壁掛
5

19
DC H-B112
中
文
i
LED指示燈
Reset /Bypass 鍵
主感應器 磁性觸發器
對齊點
等待配對中
LED 顯示狀態
1s
0.2s 成功重置
(3次)感應器觸發
配對完成
省電模式
1s
10s
設備概觀

DC H-B112
20
中
文
i
如何啟用暫停模式:
請在門窗感應器關閉情況按Bypass鈕一下，在
1分鐘內開關門窗。若按Bypass鈕未開關門窗
則不會啟用暫停模式。
注意：當門窗關閉或開啟超過5分鐘時，暫停
模式將會停用。
Bypass 鍵
設備概觀