Nags Head Hammocks Classic Conversation Chair User manual

CONVERSATION
CLASSIC
CHAIR
INSTRUCTIONS
• CHAIR BACK
• CHAIR SEAT
• LEFT ARM/LEFT LEG ASSEMBLY
• RIGHT ARM/RIGHT LEG ASSEMBLY
• FRONT SPREADER BAR
• REAR SPREADER BAR
• LEFT SPREADER BAR ARM
• RIGHT SPREADER BAR ARM
• RUBBER MALLET
• KNIFE OR SCISSORS
• PHILLIPS HEAD SCREWDRIVER
• DRILL
HARDWARE PACK
CHAIR PARTS
SUGGESTED TOOLS
STEP 1. Cut zip ties to remove spreader bar arms from leg
assembly. Use (4) 2” screws to attach left and right spreader
bar arms to foot rest and spreader bar.
2”
SCREW
RIGHT SPREADER
BAR ARM
REAR SPREADER BAR
FRONT SPREADER BAR
ASSEMBLY
LEFT SPREADER
BAR ARM
Hardware Pack Weight: 11.9 oz.
(14) 2” BARREL BOLTS
(16) BARREL NUTS
(2) 1.5” BARREL BOLTS
(6) 2” SCREWS
(2) PEGS
(1) ALLEN WRENCH
(1) SQUARE-HEAD BIT

STEP 4. Use (2) 2” screws to attach chair back to chair seat. Tighten
all bolts once screws are in.
STEP 3. Use (2) 1.5” barrel bolts and (2)
barrel nuts to attach chair back to right &
left arm/leg assembly.
Congratulations on purchasing this Classic Conversation Chair. QUESTIONS
REGARDING THIS PRODUCT? Call our customer service team, 800.643.3522.
RESIDENTIAL WARRANTY - This quality product includes a FULL LIFETIME
WARRANTY for RESIDENTIAL CUSTOMERS. In the unlikely event any splintering,
rotting, cracking, peeling, chipping, insect infestation or other damage should ever
occur, The Hammock Source will replace this furniture, at no charge to you. Note
that an original sales receipt must accompany any returned product, along with a
Return Authorization Number from Hammock Source customer service; call toll-free
at 800.643.3522.
CONTRACTOR WARRANTY - CONTRACTORS receive a FULL 7-YEAR WARRANTY.
Follow the same steps outlined above.
ASSEMBLY
RIGHT ARM/LEG ASSEMBLY
LEFT ARM/LEG ASSEMBLY
CHAIR
SEAT
2” BARREL
BOLT
BARREL NUT
PEG
2”
SCREW
No predrilled holes.
Screw straight into plastic.
STEP 2. Use (14) 2” barrel bolts, (14) barrel nuts and (2) pegs to
attach right & left arm/leg assembly to chair seat and foot rest. Keep
all barrel bolts loose until Step 4.
#6082 / 0217
1.5” BARREL
BOLT
CHAIR BACK BARREL
NUT