Nags Head Hammocks Classic Dining Chair User manual

CLASSIC
DINING CHAIR
INSTRUC TIONS
• CHAIR BACK
• CHAIR SEAT
• LEFT LEG
• RIGHT LEG
• BOTTOM CHAIR FRAME
• PHILLIPS HEAD SCREWDRIVER
Hardware Pack Weight: 10.4 oz.
(18) BARREL NUTS
(18) 1.5” BARREL BOLTS
(1) ALLEN WRENCH
HARDWARE PACK
CHAIR PARTS
SUGGESTED TOOLS
STEP 1. Use (6) 1.5” barrel bolts to attach chair back to chair
seat. Keep all barrel bolts loose until Step 3.
ASSEMBLY
CHAIR
BACK
CHAIR
SEAT
BARREL
NUT
1.5”
BARREL
BOLT

Congratulations on purchasing this Classic Dining Chair. QUESTIONS REGARDING THIS PRODUCT? Call our customer service team, 800.643.3522.
RESIDENTIAL WARRANTY - This quality product includes a FULL LIFETIME WARRANTY for RESIDENTIAL CUSTOMERS. In the unlikely event any splintering, rotting, cracking, peeling,
chipping, insect infestation or other damage should ever occur, The Hammock Source will replace this furniture, at no charge to you. Note that an original sales receipt must accompany any
returned product, along with a Return Authorization Number from Hammock Source customer service; call toll-free at 800.643.3522.
CONTRACTOR WARRANTY - CONTRACTORS receive a FULL 7-YEAR WARRANTY. Follow the same steps outlined above.
ASSEMBLY
STEP 3. Use (8) 1.5” barrel bolts and (8) barrel nuts to attach
chair frame to chair legs. Tighten all bolts.
STEP 2. Use (4) 1.5” barrel bolts to attach left and right leg to chair
seat. Keep all barrel bolts loose until Step 3.
LEFT
LEG
1.5”
BARREL
BOLT
#6019 / 0417
RIGHT
LEG
BARREL
NUT
BARREL
NUT
1.5”
BARREL
BOLT
BOTTOM
CHAIR
FRAME