Nags Head Hammocks HHDC User manual

DINING CHAIR
INSTRUCTIONS
• CHAIR BACK/BACK LEGS
• CHAIR SEAT
• LEFT FRONT LEG
• RIGHT FRONT LEG
• NAMEPLATE
• LOWER FRAME
• RUBBER MALLET
• PHILLIPS HEAD SCREWDRIVER
• DRILL
HHDC1: Hardware Pack Weight: 3.5 oz.
(10) BARREL NUTS
(10) 2” BARREL BOLTS
(4) 2” SCREWS
(2) 3” SCREWS
(1) ALLEN WRENCH
(1) SQUARE-HEAD BIT
HARDWARE PACK
CHAIR PARTS
SUGGESTED TOOLS
STEP 1. Attach chair seat to left and right front legs using (4) barrel
bolts and barrel nuts.
Note: Name plate hidden to show assembly.
ASSEMBLY
LEFTLEFT
FRONTFRONT
LEGLEG
BARRELBARREL
NUTNUT
RIGHTRIGHT
FRONTFRONT
LEGLEG
CHAIR SEATCHAIR SEAT

Congratulations on purchasing this Dining Chair. QUESTIONS REGARDING THIS PRODUCT?
Call our customer service team, 252-758-0641.
RESIDENTIAL WARRANTY - This quality product includes a LIMITED LIFETIME
WARRANTY for RESIDENTIAL CUSTOMERS. In the unlikely event any splintering, rotting,
cracking, peeling, or chipping should ever occur, The Hammock Source will supply
replacement parts or replace the furniture, at no charge to you. This does not include
negligence, improper use, animal damage or damage caused by natural disasters. When
using around fire, keep furniture at a minimum distance of 30 inches from the heat source.
Prevent prolonged exposure to chlorinated water. Note that an original sales receipt
must accompany any returned product, along with a Return Authorization Number from
Hammock Source customer service; call toll-free at 252-758-0641.
CONTRACTOR WARRANTY - CONTRACTORS receive a LIMITED 7-YEAR WARRANTY.
Follow the same steps outlined above.
MAINTENANCE - Thoroughly inspect product before each use. Periodically check bolts
after assembly and re-tighten when necessary.
ASSEMBLY
LOWER FRAME
3” SCREW
2” SCREW
#6109
STEP 2. Use (2) 3” screws to attach
name plate to chair front legs.
STEP 4. Use (4) 2” screws to attach
lower frame to front and back chair
legs. The screws on the front of
the lower frame should be oset
towards the top side.
STEP 3. Use (6) 2” bolts and barrel
nuts to attach chair back to chair
seat.
NAME PLATE
2” BOLT
CHAIR
BACK
BARREL
NUT
*6109*