Nags Head Hammocks HHCCSWV1 User manual

MODERN SWIVEL CHAIR
INSTRUCTIONS
• SWIVEL BASE & SEAT ASSEMBLY
• CHAIR BACK
• CHAIR LEFT ARM
• CHAIR RIGHT ARM
• PHILLIPS HEAD SCREWDRIVER
Hardware Pack Weight: 4.6 oz.
(6) BARREL NUTS
(2) 2” SCREWS
(1) SQUARE HEAD BIT
(2) 1.5” BARREL BOLTS
(4) 2” BARREL BOLTS
(1) ALLEN WRENCH
HARDWARE PACK
CHAIR PARTS
SUGGESTED TOOLS
STEP 1. Attach Chair Back to Swivel Base & Seat Assembly using (2)
2” screws.
ASSEMBLY
CHAIR BACKCHAIR BACK
SWIVELSWIVEL
BASE & SEATBASE & SEAT
ASSEMBLYASSEMBLY
2” SCREW2” SCREW

Congratulations on purchasing this Modern Swivel Chair. QUESTIONS REGARDING THIS PRODUCT? Call our customer service team, 252-758-0641.
RESIDENTIAL WARRANTY - This quality product includes a LIMITED LIFETIME WARRANTY for RESIDENTIAL CUSTOMERS. In the unlikely event any splintering, rotting, cracking,
peeling, or chipping should ever occur, The Hammock Source will supply replacement parts or replace the furniture, at no charge to you. This does not include negligence, improper use,
animal damage or damage caused by natural disasters. When using around fire, keep furniture at a minimum distance of 30 inches from the heat source. Prevent prolonged exposure to
chlorinated water. Note that an original sales receipt must accompany any returned product, along with a Return Authorization Number from Hammock Source customer service; call toll-
free at 252-758-0641.
CONTRACTOR WARRANTY - CONTRACTORS receive a LIMITED 7-YEAR WARRANTY. Follow the same steps outlined above.
MAINTENANCE - Thoroughly inspect product before each use. Periodically check bolts after assembly and re-tighten when necessary.
ASSEMBLY
#6115
STEP 3. Attach arms to chair back
using (2) 1.5” barrel bolts and barrel
nuts.
Tighten all bolts.
STEP 2. Use (4) 2” barrel bolts
and barrel nuts to attach The
left and right arm assemblies to
the seat base.
Keep bolts loose until step 3.
BARREL NUT
1.5” BARREL
BOLT
RIGHT
ARM
2” BARREL
BOLT
LEFT
ARM
*6115*