nama Vitality 5800 User manual

03 Welcome
05 Important Safeguards
06 Precautions for Safe Use
07 Cautions During Operation
08 Parts and Accessories
10 How to Disassemble: Chamber
11 How to Assemble: Chamber Set and Base
12 How to Assemble: Juice & Smoothie Strainer
14 How to Assemble: Sorbet Strainer
16 How to Prepare Ingredients for Optimal Juicing
and Maximum Nutrient Extraction (Strainer Types)
17 How to Use: Overview
18 How to Use: Pulp Control Lever by Mode
19 When the Auger Stops During Operation
20 How to Clean
22 Before Requesting a Repair / Troubleshooting
24 Product Speci cations / Warranty
• Read the instructions carefully before using.
• Keep these instructions somewhere easily accessible.
• Use only with 120V AC power supply.
• Design and product development may be upgraded without notice.
• Any quality improvements are subject to change without notice.
Contents
Vitality 5800
(Household use only / Warranty Included)
User Manual

02

03
Welcome
Thank you for purchasing your new Nama Cold Press Juicer. We are
very excited to welcome you to our Nama brand and community. One
of our goals is to empower you to make healthy choices that taste good
and are fun to make. This brand is built on the idea that our wellness
rituals will help everyone on their path to becoming better, every day.
We want you to maximize the benets from your new Nama Cold Press
Juicer and be able to use it with the utmost condence, so please read
through this user manual prior to using.
At Nama, we aim to provide you and our community with tools to
develop condence in creating your own wellness journey to becoming
better, every day. We strive to continually improve our products,
services and content and graciously ask for your feedback to help us
be better.
Cheers to good health and happy juicing!
Your friends at Nama
Check us out online at www.namawell.com

04
Notes

05
1. WHEN USING ELECTRICAL APPLIANCES, BASIC SAFETY PRECAUTIONS
SHOULD ALWAYS BE FOLLOWED. READ ALL INSTRUCTIONS.
2. TO PROTECT AGAINST RISK OF ELECTRICAL SHOCK, DO NOT PUT THE
MAIN BODY MOTOR IN WATER OR ANY OTHER LIQUID.
3. THIS APPLIANCE IS NOT INTENDED FOR USE BY CHILDREN OR
BY PERSONS WITH REDUCED PHYSICAL, SENSORY, OR MENTAL
CAPABILITIES, OR LACK OF EXPERIENCE AND KNOWLEDGE. CLOSE
SUPERVISION IS NECESSARY WHEN ANY APPLIANCE IS USED NEAR
CHILDREN. CHILDREN SHOULD BE SUPERVISED TO ENSURE THAT THEY
DO NOT PLAY WITH THE APPLIANCE.
4. TURN THE APPLIANCE OFF, THEN UNPLUG FROM OUTLET WHEN NOT
IN USE, BEFORE ASSEMBLING OR DISASSEMBLING PARTS AND BEFORE
CLEANING. TO UNPLUG, GRASP THE PLUG AND PULL FROM THE
OUTLET. NEVER PULL FROM THE POWER CORD.
5. AVOID CONTACT WITH MOVING PARTS.
6. DO NOT OPERATE ANY APPLIANCE WITH A DAMAGED CORD OR
PLUG, OR AFTER THE APPLIANCE MALFUNCTIONS, OR IS DROPPED
OR DAMAGED IN ANY MANNER. PLEASE CONTACT NAMA CUSTOMER
CARE CENTER TO RETURN APPLIANCE.
7. THE USE OF ATTACHMENTS NOT RECOMMENDED OR SOLD BY THE
MANUFACTURER MAY CAUSE FIRE, ELECTRIC SHOCK OR INJURY.
8. DO NOT LET CORD HANG OVER EDGE OF TABLE OR COUNTER.
9. ALWAYS MAKE SURE HOPPER IS SECURELY FASTENED IN PLACE BEFORE
MOTOR IS TURNED ON. DO NOT UNFASTEN HOPPER WHILE JUICER IS
IN OPERATION.
10. BE SURE TO TURN SWITCH TO OFF POSITION AFTER EACH USE OF
YOUR JUICER. MAKE SURE THE MOTOR STOPS COMPLETELY BEFORE
DISASSEMBLING.
11. DO NOT PUT YOUR FINGERS OR OTHER OBJECTS INTO THE JUICER
WHILE IT IS IN OPERATION. IF FOOD BECOMES LODGED IN OPENING,
USE FOOD PUSHER OR ANOTHER PIECE OF FRUIT OR VEGETABLE TO
PUSH IT DOWN. WHEN THIS METHOD IS NOT POSSIBLE, TURN THE
MOTOR OFF AND DISASSEMBLE JUICER TO REMOVE THE REMAINING
FOOD.
12. DO NOT USE OUTDOORS.
13. DO NOT PLACE ON OR NEAR A HOT GAS OR ELECTRIC BURNER OR IN A
HEATED OVEN.
14. DO NOT USE APPLIANCE FOR OTHER THAN INTENDED USE.
SAVE THESE INSTRUCTIONS
IMPORTANT SAFEGUARDS

06 PRECAUTIONS FOR SAFE USE
• DO NOT PLUG OR UNPLUG WITH WET HANDS. It may cause electric shock or injury.
• DO NOT USE OTHER THAN 120 V AC. It may cause electric shock, re or product failure. If the voltage is dierent,
it may shorten the life of the motor or cause a failure.
• PLUG THE POWER CORD IN CORRECTLY AND PUSH IT TIGHTLY INTO A WALL SOCKET. It may cause an
electric shock or a re.
• IF THE POWER CORD IS DAMAGED, IT MUST BE REPLACED BY THE MANUFACTURER’S SERVICE CENTER
OR SIMILARLY QUALIFIED PERSONS, IN ORDER TO AVOID A HAZARD. If the power cord is damaged, it may
cause electric shock or re.
• NEVER ALTER THE APPLIANCE. ALSO, DO NOT DISASSEMBLE OR REPAIR THE PRODUCT BY YOURSELF. DO
NOT INSERT FINGERS, FOREIGN SUBSTANCES OR OBJECTS SUCH AS PINS INTO GAPS OR HOLES IN THE
BODY. It may cause a re, electric shock or product failure. For any technical support, contact the Customer Service.
• WHEN THE POWER CORD OR WIRE IS DAMAGED OR THE PLUGIN PART BECOMES LOOSE, DO NOT
OPERATE IT. It may cause electric shock, re or injury.
• DO NOT MOISTEN BODY OR SPLASH WATER ON THE BODY. Be careful not to let any liquids or other substances
get into the switch of the appliance.
• DO NOT OPERATE THE SWITCH WITH WET HANDS. It may cause an electric shock or re.
• FOR SAFETY, MUST DO GROUNDING CONNECTION. ALSO, DO NOT DO THE GROUNDING ON GAS PIPE,
PLASTIC WATER PIPE, TELEPHONE WIRE, ETC. It could cause electric shock, re, malfunction or explosion. Be sure
to use the electrical outlet with ground connection.
• NEVER DISASSEMBLE THE CHAMBER SET DURING OPERATION OR INSERT FINGERS, FOREIGN OBJECTS
SUCH AS FORKS, SPOONS, ETC. INTO HOPPER CHUTE OR JUICE OUTLET. It may cause injury, accident or
product failure.
• APPLIANCES CAN BE USED BY PERSONS WITH REDUCED PHYSICAL, SENSORY OR MENTAL CAPABILITIES
OR LACK OF EXPERIENCE AND KNOWLEDGE IF THEY HAVE BEEN GIVEN SUPERVISION OR INSTRUCTION
CONCERNING USE OF THE APPLIANCE IN A SAFE WAY AND IF THEY UNDERSTAND THE HAZARDS
INVOLVED. CHILDREN SHALL NOT PLAY WITH THE APPLIANCE. CLEANING AND USER MAINTENANCE
SHALL NOT BE MADE BY CHILDREN. THIS APPLIANCE SHALL NOT BE USED BY CHILDREN. KEEP THE
APPLIANCE AND ITS CORD AWAY FROM CHILDREN.
• DO NOT OPERATE WITHOUT LOCKING THE HOPPER PROPERLY. It may cause an injury or a failure.
• WHEN A GAS LEAK IS DETECTED, DO NOT INSERT THE POWER CORD INTO ITS SLOT. OPEN THE WINDOW
IMMEDIATELY FOR AIR VENTILATION. It may cause injury or failure.
• NEVER PUT FINGERS, FORKS OR ANY OBJECTS INTO JUICE OUTLET. It may cause injury or failure.
• IF ROTATION OF AUGER IS STOPPED DURING NORMAL OPERATION, PRESS REV BUTTON AND HOLD FOR
2~3 SECONDS AND AFTER REVERSE OPERATION IS COMPLETELY STOPPED, PRESS ON BUTTON AGAIN.
If such stop continues during the operation, the parts may be damaged and performance may be deteriorated due to
overheating in a motor. When the problem continues, stop the appliance immediately and contact Customer Service.
• DURING THE OPERATION, DO NOT ATTEMPT TO MOVE THE BODY, DISASSEMBLE THE CHAMBER SET OR
PARTS AND TRY TO LOCK THEM. It may cause an injury or a failure. If needed, switch o rst and unplug the power
cord.
• WHEN USING THE APPLIANCE, BE CAREFUL WITH A NECKTIE, LONG NECKLACE, SCARF, ETC. TO NOT BE
BE ENTANGLED INTO HOPPER CHUTE. It may cause injury, failure or breakage.
• PLACE THE APPLIANCE ON A FLAT AND STABLE SURFACE. It may cause injury or failure.
• WHEN PLACING INGREDIENTS INTO THE HOPPER CHUTE, USE ONLY THE PUSHER PROVIDED. It may cause
injury or failure.
• DO NOT ALLOW A SEVERE SHOCK TO THE APPLIANCE OR DROP IT. It may cause electric shock, re or damage.
• IF THE APPLIANCE GIVES OFF AN UNPLEASANT SMELL, EXCESSIVE HEATING, OR SMOKE, STOP USING
IMMEDIATELY AND CONTACT CUSTOMER SERVICE. When using a new appliance, it gives o a smell and the
smell disappears naturally over time.
• ALWAYS UNPLUG THE APPLIANCE AFTER USE. ALWAYS DISCONNECT THE APPLIANCE FROM THE
SUPPLY IF IT IS LEFT UNATTENDED AND BEFORE ASSEMBLING, DISASSEMBLING OR CLEANING. WHEN
UNPLUGGING THE POWER CORD, MAKE SURE TO HOLD THE POWER CORD. Pulling the wire to unplug may
cause electric shock or re.
• DO NOT WASH AT HIGH TEMPERATURES OF 800C 1760F OR HIGHER. DO NOT PUT THE APPLIANCE IN A
DISHWASHER, DRYER OR A MICROWAVE, ETC. It may cause a failure or parts deformation.
• THE APPLIANCE WEIGHS ABOUT 6.5 kg 14.3 lb. WHEN MOVING THE APPLIANCE, ENSURE TO MOVE IT
HOLDING GRIPS TIGHTLY AT THE BOTTOM OF BODY WITH BOTH HANDS. By attempting to hold chamber or
the edge of the body, the body may fall causing an injury or failure.

07
NOTE
If the unit is not cleaned immediately after use, a residue may dry and stick to the unit. This will
make assembling and cleaning dicult as well as lead to performance degradation.
* Please use caution with the following ingredients, which may cause damage or failure to
product.
- Hard seeds and pits must be removed before juicing. Examples of fruits with hard seeds and
pits include peaches, nectarines, mangoes, apricots, cherries, plums, etc.
- For stalk vegetables with strong ber such as water parsleys, celery etc. should be cut into
small size about 1-2 pieces before putting into the hopper chute.
- Do not put in sesame, coee beans, Chinese pepper, etc. which cannot be extracted.
- Do not put in fruits preserved in alcohol, sugar, honey, etc. (grapes, apricot, berries, etc.) and
enzymes (glasswort, house leek, etc.).
* We recommend you to drink green vegetable juice and fruit juice immediately after
extraction rather than keeping them for long time.
* Do not use for grinding grains.
- It may cause damage or failure.
* Do not re-squeeze residues expelled through the pulp outlet.
- Soft fruits can be re-squeezed.
* Do not operate the appliance before putting in the ingredients.
* Do not use the appliance for more than 30 minutes continuously.
- It may cause a failure due to overheating of the motor.
- When using continuously, every 30 minutes, stop for 5 minutes to allow motor to cool down
and then resume operation.
* Never insert nger, fork or spoon etc. into juice outlet, pulp outlet, or hopper chute
during the operation.
- Inserting such objects into juice outlet, pulp outlet or hopper chute during operation may
cause damage and breakage to the product and can result in harm or injury.
* Do not press the ingredients with anything except the pusher.
- It may cause damage or failure of product and injury to persons.
* Do not operate the switch with wet hands.
- It may cause electric shock or re. Do not put foreign objects near the switch.
* When you extract over 400ml at once, please open the pulp control lever every 400ml
to emit the pulp.
- The hopper may be dicult to open or it may cause damage to product when the pressure
inside the chamber increases.
* Please only use sorbet strainer for frozen fruits.
Do not insert ice cubes or other ingredients for grinding.
- It may cause damage or failure.
CAUTIONS DURING OPERATION

08
09 Juice Container Cover x 1
Parts and Accessories
05 Pusher x 1
03 Auger x 1
10 Juice Container x 1 11 Pulp Container x 1
Screw Axis
02 Spinning Brush x 1
Silicon Brush
Side
Hopper
Chute
Brush Holder
06~08 Strainer
04 Chamber x 1
Juice Outlet
Mid Gear
Pulp Outlet
Juice Cap
Juice Cap
Packing
01 Hopper x 1
Hopper Chute
Safety Sensor
Sorbet
Outlet
06 Juice Strainer x 1 07 Smoothie Strainer x 1 08 Sorbet Strainer x 1
Strainer
Bump
Pulp Control Lever

09
Shaft
Parts and Accessories
13 Cleaning Brush x 1
Operating Switch
Safety Sensor
12 Base x 1
Base
Bump

10
* Please clean all the parts before  rst use.
How to Disassemble: Chamber
Turn the hopper counterclockwise, so the safety
line on top of lid moves from lock symbol to
unlock symbol on outside of chamber, then pull
up to remove.
1
Disassemble the auger, strainer and spinning
brush from the chamber.
2
Pull out the auger holding both sides of wing.
3
Disassemble the spinning brush and strainer.
4
NOTE
If hopper lid is stuck or di cult to remove:
Place chamber set on base, press [REV] button for about
10 seconds, allow to stop. Keeping chamber set on base,
turn hopper counterclockwise using the chamber and
base for leverage.

1111
How to Assemble: Chamber Set and Base
The chamber can only be assembled to
the base with the pulp control lever in the
position.
Fit the bottom of the chamber to the
base bump.
If the pulp control lever is not placed on , the
chamber set and base will not  t completely.
If the sign < > on the top of base and the
sign < > on the chamber set are aligned
well, it is perfectly assembled.
* The assembly method is the same regardless of strainer type.
NOTE
The main base will not work by itself, the chamber set
must be on base with safety sensors aligned in order to
operate.
1
2
3

12
Place the auger into the strainer,
then into the spinning brush.
Fit the bottom of the chamber
to the base bump.
2
STEP
1
STEP
How to Assemble: Juice & Smoothie Strainer
Place the pulp control lever in
position and then place
the empty chamber onto base.
If the pulp control lever is
not placed on , the
chamber set and base will not  t
completely.

13
NOTE
3
STEP 4
STEP
The hopper can
be operated when
assembled in either
direction for easier
operation by user.
How to Assemble: Juice & Smoothie Strainer
Assemble the hopper, like the picture,
with either safety line aligned with
unlock symbol on chamber and turn it
clockwise until it is locked completely
and the safety line is aligned with lock
symbol.
Place the assembled parts from
[STEP 2] into the chamber by
aligning any circle on top of the
strainer to the safety line on top of
back of base to  t the groove in the
bottom bump of the chamber.
Align any circle
on top of
strainer with
line on base

14
NOTE
The spinning
brush isn't
needed for
making sorbet.
2
STEP
Assemble the chamber and sorbet
strainer. Place the sorbet strainer
with outlet spout aligned with juice
outlet in the chamber.
Press the auger into the assembled
parts from [STEP 1] until the screw
 ts perfectly.
1
STEP
How to Assemble: Sorbet Strainer
Juice outlet
Sorbet outlet

15
NOTE
Assemble the hopper, like the picture,
with either safety line aligned with unlock
symbol on chamber and turn it clockwise
until it is locked completely and the safety
line is aligned with lock symbol.
3
STEP
How to Assemble: Sorbet Strainer
The hopper can
be operated when
assembled in either
direction for easier
operation by user.

16
Sorbet strainer is used for making sorbet, ice cream and frozen desserts.
The sorbet may leak out of the pulp outlet or outside of the strainer, which
is normal and not a product failure. Do not use ice cubes or frozen liquids.
Fruits like apple, pear, kiwi, etc. put them with seeds and peels.
However, apple seeds contain toxicity, so it is better to remove them.
Separate each grape from the cluster. Peel the pomegranate and use esh only.
Peel o the skin of watermelon, melon, orange, grapefruit, lemon and cut them
into appropriate size to t in chute.
Fruits like mango, cherry, peach, lemon or plum, etc. have hard seeds. Those
seeds might cause stoppage or parts damage, so they must be removed
before using it.
Cut brous ingredients into appropriate sized pieces to t in chute.
Put a handful of wheat or chives in not to be scattered.
Dice frozen fruits as 3/4 inch to make sorbet. When using fruits with shells or hard skin,
please peel and freeze to use. Hard seeds in fruits, such as mangoes, cherry, nectarine,
lemon, plum, peach etc., that are hard to chew with our teeth should be taken out before
freezing. Please use seedless grapes.
When juicing brous ingredients, including ginger, cut to appropriate size
to t in chute and insert slowly. When extracting juice from root vegetables,
including ginger (carrot, dandelion, potato, beet, etc.), non-food materials such
as dirt on the surface may damage the parts. Please remove peels before using
the product. When extracting a large amount of juice, repeat the process of
"disassembling and cleaning after extracting juice from 2.25 lbs of ingredients”.
USE BY STRAINER TYPES
* This is a reference about how to trim the ingredients, so if you have allergy please choose your own
proper ingredients.
* Please refer to the recipe book for the product usage of each ingredient.
Smoothie strainer has larger holes for making thick and pulpy juice.
Great if you like pulp and ber. Also used to make smoothie, latte and soups.
Apple, pear,
kiwi
Watermelon,
melon, orange,
grapefruit, lemon
Mango, cherry,
peach, lemon
Wheat, chives,
Water parsleys,
celery, kale
Smoothie
strainer
Juice
strainer
Sorbet
strainer
Flesh
Ginger · Garlic
Pomegranate,
grapes
How to trim the ingredients for optimal juicing
How to trim the ingredients for making sorbet
The sorbet strainer is only for frozen fruits.
Do not use for crushing ice and grinding.
NOTE
Juice strainer has small ne holes for making pulp-free juice.
Great for making silky smooth nut milks.
How to Prepare the Ingredients for Optimal Juicing

17
1
3
5
2
4
How to Use: Overview
NOTE
When using [ON] or [REV] button, make sure
that the auger is completely stopped before
pressing either button.
Press [ON] button to start.
Place the pulp control lever into CLOSE
() position before operating.
Juice: Place the pulp control lever in half-
open () when putting the last ingredients.
Sorbet: Only use with pulp control lever in
close ( ) position.
When using juice or smoothie strainer, after
extracting 13.5 oz (400 ml), toggling the pulp
control lever between half-open and close
position a few times will help release the pulp
residues and make it easier to open the hopper.
For safety, allow the machine to come to a complete
stop. Press [REV] button for about 10 seconds to
loosen up pulp and allow for easier disassembly.
Do not press the ingredients with anything
except the pusher provided. Ingredients need
to be appropriate size to  t in the hopper chute.
When you extract over 13.5 oz (400 ml) at once,
please open the pulp control lever every 13.5 oz (400
ml) to help release the pulp from strainer.
For your safety, this appliance only works when
it's correctly assembled with chamber set.
Put ingredients gradually in the hopper
chute and press with the pusher.
After extraction is completed, press the
reverse [REV] switch position.
작동스위치 정회전
역회전
off(정지)
ON
REV
ON
ON
[REV]
Reverse
Stop
작동스위치 정회전
역회전
ON
REV
ON
ON
[REV]
Reverse
Pusher
Upper
hopper
chute
Side
hopper
chute
Press

18
* The pulp control lever is between the juice cap and pulp outlet.
[ ] Cleaning Mode
[ ] Sorbet mode
[ ] Preparation/Extraction mode
[] Completion, Simple Cleaning Mode
How to Use: Pulp Control Lever by Mode
NOTE
When it is hard to open the hopper after the operation: Place the pulp control lever into half-closed ( )
position and press Reverse button for about 3~4 seconds. Repeat this for 2~3 times and the hopper will be
open easily.
Always start operation with the pulp control lever in close
position. When you are extracting more than 13.5 oz (400
ml) at one time, please toggle lever between half-open and
close position and leave in half-open position to help release
the pulp residues.
Close ( ) the pulp control lever to use since the
pulp is not released separately.
For easier cleaning, and to open the hopper more easily,
release the pulp residues by toggling the lever between the
half-open and close position and leave in half-open position
when you are putting in last ingredients for extraction.
For Simple Cleaning Mode, place the pulp control lever into
half-closed ( ) position and release the residues.
When detaching and cleaning the chamber, place the pulp
control lever completely into ( ) position.
You can easily and conveniently clean the chamber.

19
*The appliance may stop if ingredients are overloaded or inserted quickly.
*Gradually insert ingredients, since the product squeezes them instead of grinding.
[ON]
[REV]
[STOP]
[ON]
NOTE
[REV]
When Auger Stops During Operation
Caution when using operation button
1
2
NOTE
[REV] is the button to push back the ingredients
upward.
[REV] only works while pressing the button, and
the rotation of the auger stops If you release the
button.
Press [REV] button on the operating
switch for about 3~5 seconds and stop it.
Repeat this 2~3 times.
Press [ON] button to operate after
reverse operation is completely stopped.
When using [ON] or [REV] button, make sure
that the auger stops completely.
Even after following the directions above and
still doesn’t work, please unplug the power
cord and disassemble chamber set, and clean it.
Then, try it again.
In case of reversing during operation, press [REV] button shortly to stop
the appliance, then you press [REV] button for operation.
From the feature of the product, even though you stop the operation, it doesn’t stop
right away. It rotates slowly then stops. If the rotation stops completely, you may
press the button to any direction you want.

20
Clean the parts
How to Clean
NOTE
1. If the chamber is not cleaned immediately after use, a residue may dry and
stick to the unit. This will make disassembling and cleaning di cult as well as
lead to performance degradation. Please wash the chamber set immediately
after use.
2. Do not wash with hot or boiling water, an iron scrubber, abrasive material,
sink solvents, or sharp cleaning tools. Do not put it in a dishwasher or dish
dryer. After washing thoroughly, dry and store in a clean area.
When you clean the
chamber set, wash
the residue inside
and bottom of the
chamber under
running water.
The chamber
packing can't be
disassembled. Do
not disassemble the
chamber packing.
If you try to
disassemble the
chamber packing,
it might get damaged.
Chamber
packing
01 After you have  nished juicing, to help make cleanup
a little easier, with the juice cap closed and an empty
juice container placed under juice outlet, add about
16 oz of warm soapy water to the hopper tray  lling
up juice chamber. Make sure the pulp control lever
is in closed position. Turn on juicer and run for 1-2
minutes, open juice cap and allow chamber to
empty and continue to next steps for cleaning.
02 Unplug the power cord with dry hands after the unit
has been completely stopped.
03 Remove the chamber set from the main body. Twist
the hopper to open and lift up the parts in order to
disassemble the unit.
04 Use a cleaning brush and wash the chamber set under
running water.
05 Open the pulp control lever ( ) and juice cap to
wash the chamber
06 Wipe the main base with a damp towel or a soft cloth.
07 The silicone packing can be disassembled and
washed. (Including juice cap packing, silicone brush)
08 You can sterilize and clean the product by soaking in
water diluted with about 3.5 oz (100 g) baking soda
and/or 3.5 oz (100 g) citric acid for about 30 minutes.
Rinse and dry thoroughly.
NOTE