Narbutas Silent Room M User manual

OPERATION MANUAL
SAFETY AND WARNINGS
Inappropriate use of this product may cause property or bodily injury.
Check surroundings on all sides before using the furniture. Do not lean any objects neither to wall, nor
to glass facade.
Ensure power cords are sufficient length to reach power outlet before starting assembly. SILENT ROOM
should not be used in environments with high humidity.
If you need to relocate SILENT ROOM, DO NOT lift it or lean it only by holding/pulling single wall. Lifting/
leaning will stress fasteners that connect the frames. One should disassemble before moving the
SILENT ROOM!
Uneven floors require more accurate feet height adjustments.
Please provide this operation manual to any users, installers, or support personnel operating the
product.
www.narbutas.com
SILENT ROOM

SETUP AND INSTALLATION
Choose a placement for the SILENT ROOM that is a safe distance from window frames, radiators, furniture etc.
Once the SILENT ROOM has been assembled, adjust the feet so that the object is in right horizontal level (please refer to
assembly scheme). Do not shi its position aer assembly.
Connect the SILENT ROOM to the outlet and it is ready for use. For the rst start of SILENT ROOM please turn on master
switch ON on the control unit.
TROUBLESHOOTING
If your SILENT ROOM does not function properly (automatic control of lighting and ventilation does not work), please do the
RESET:
Press OFF and wait 30 seconds then press master switch ON on the control unit.
Now the SILENT ROOM is ready for use. If this does not work please contact your seller.
USAGE
1. Switching on and o
Before using SILENT ROOM for the rst
time, you should press master switch ON
on the control unit. Control unit is under
the lid at the bottom of media wall.
2. TV/monitor installment
For TV or monitor connection/disconnection,
you should connect a cable from power
unit to TV/monitor (look at assembly
instructions, red color). Power cable should
be plugged into one of power unit sockets,
as the rest 3 sockets stay free for future
connections.
www.narbutas.com

3. Automac control scenario
For your convenience and for the purpose of energy saving SILENT ROOM has got automatic control of lighting and ventilation.
You do not need to take care of switching on/o before/aer usage.
SILENT ROOM CLEANING AND MAINTENANCE
Casual cleaning:
• Please vacuum all fabric surfaces periodically (every 2 weeks recommended)
• Vacuum or clean the roof (every month recommended)
• Wipe hard surfaces as tables, melamine walls (can be done daily according necessity)
• Clean glass facade with mild glass cleaner (can be done daily according necessity)
Recurrent maintenance:
• Please vacuum/clean ventilation system (grills, ventilators and its wings)
• Check electric system (motion sensor, DC connectors and AC power sockets, ventilators)
• Check the status of hinges, handle and seals. Lubricate or change parts if necessary
4. Control of lighng and venlaon
Nevertheless, SILENT ROOM lighting and
ventilation works automatically, you are able to
set it manually as well. Aer you enter SILENT
ROOM, lighting and ventilation switches to
default programmed average level. BY turning
knobs right or le you are able to set lighting
and ventilation level.
AUTOMATIC OPERATION
ACTIVATION OF LIGHTING/
VENTILATION*
Individual adjustment
available
DETECTION OF LAST
PRESENCE
90 seconds
LIGHTS DIMM
Refresh time**
VENTILATION TURNS OFF
60 minutes
LIGHTS TURN OFF
*Lighting/ventilation always
starts in DEFAULT level
**SILENT ROOM S ventilates 90 s
SILENT ROOM M ventilates 90 s
SILENT ROOM L ventilates 180 s
www.narbutas.com