National Instruments PCI-1407 Manual instruction

Set up and Test
the PCI/PXI-1407
1Install Your Software
Need more information?
See the IMAQ PCI/PXI-1407 User Manual.

2Install Your PCI/PXI-1407 and
Connect Your Camera
Caution Turn the power off before installing your hardware.
Note Follow the instructions in your computer documentation to install the
PCI/PXI-1407 device.
Need more information?
See the IMAQ PCI/PXI-1407 User Manual.
!
Personal
Computer
PXI Chassis
Ejector Handle in
Down Position
PCI Slot
PCI-1407
PXI-1407
8
7
6
5
4
3
2
1
ON STANDBY

3Run the IMAQ Configuration Utility and
the IMAQ Diagnostics
Need more information?
See the IMAQ Configuration Utility online help.

BridgeVIEW™, CVI™, IMAQ™, LabVIEW™, NI-DAQ™, NI-IMAQ™, and StillColor™ are trademarks of
National Instruments Corporation. Product and company names are trademarks or trade names of
their respective companies.
© Copyright 1998 National Instruments Corporation. All rights reserved.
4Select the Camera File and Acquire an Image
Need more information?
See the IMAQ Configuration Utility online help.