National Instruments PMC-GPIB User manual

Continue to step 4 !
ni.com
Select Shutdown and click Finish, then power off computer.
3
1
Select Plug and Play Interface and click Next.
2
Insert CD, then choose Install Software.
Getting Started
Power off computer
322268b.qxd 2/27/2003 1:27 PM Page 1

Power on computer, then run NI-488.2 Getting Started Wizard.
5
© 1999–2003 National Instruments Corporation. All rights reserved.
National InstrumentsTM, NI-488.2TM, and ni.comTM are trademarks of National Instruments Corporation.
Product and company names mentioned herein are trademarks or trade names of their respective companies.
For patents covering National Instruments products, refer to the appropriate location: Help»Patents in your
software, the patents.txt file on your CD, or ni.com/patents.
*322268B-01*
322268B-01 Feb03
Install hardware 1.
A. Select an unused PMC slot. You may need to remove the host to access a PMC slot.
B. Insert the PMC-GPIB and screw it into place.
Key
1 Host Face Plate Board
2 3.3 V Keying Hole
3 5 V Keying Hole
4 PMC-GPIB Board
5 Mounting Screws
C. If you removed the host, reinstall it now.
4
23
5
4
1
1 For help installing your hardware, refer to the
GPIB Hardware Guide (available on the CD through
Getting Started Documentation).
Power on computer
322268b.qxd 2/27/2003 1:27 PM Page 2