National Instruments SCAL-4339 Quick start guide

NOTE TO USERS
SCAL-4339 Shunt
Calibration Accessory
The SCAL-4339 Shunt Calibration Accessory allows you to
supply per channel shunt resistors to the RM-4339 through a
25-pin D-SUB connector.
Refer to the NI PXIe-4339 and RM-4339 Installation Guide and
Terminal Block Specifications document for SCAL-4339 Shunt
Calibration Accessory information. Any resistors you supply are
programmatically connected to the SCA pins of the RJ-50
connector.

© 2015 National Instruments. All rights reserved.
375962A-01 Feb15
Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for more information on National
Instruments trademarks. Other product and company names mentioned herein are trademarks or trade names of
their respective companies. For patents covering National Instruments products/technology, refer to the appropriate
location: Help»Patents in your software, the patents.txt file on your media, or the National Instruments Patent
Notice at ni.com/patents. You can find information about end-user license agreements (EULAs) and
third-party legal notices in the readme file for your NI product. Refer to the Export Compliance Information at
ni.com/legal/export-compliance for the National Instruments global trade compliance policy and
how to obtain relevant HTS codes, ECCNs, and other import/export data. NI MAKES NO EXPRESS OR IMPLIED
WARRANTIES AS TO THE ACCURACY OF THE INFORMATION CONTAINED HEREIN AND SHALL NOT BE LIABLE FOR
ANY ERRORS. U.S. Government Customers: The data contained in this manual was developed at private expense
and is subject to the applicable limited rights and restricted data rights as set forth in FAR 52.227-14,
DFAR 252.227-7014, and DFAR 252.227-7015.