National Instruments sbRIO-9608 User manual

Quick Reference Guide
sbRIO-9608
Kit Contents
Screwdriver
Serial/CAN
Cable
Standoffs
and Screws
Documentation Driver Media USB Cable
Power Supply
sbRIO-9608
RMC Breakout
Board
©2019 National Instruments
All rights reserved.
Information is subject to change without notice. Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for more information on NI trademarks.
Other product and company names mentioned herein are trademarks or trade names of their respective companies. For patents covering NI products/
technology, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your media, or the National Instruments Patents Notice at
ni.com/patents. You can find information about end-user license agreements (EULAs) and third-party legal notices in the readme file for your NI product. Refer
to the Export Compliance Information at ni.com/legal/export-compliance for the NI global trade compliance policy and how to obtain relevant HTS codes,
ECCNs, and other import/export data. NI MAKES NO EXPRESS OR IMPLIED WARRANTIES AS TO THE ACCURACY OF THE INFORMATION CONTAINED HEREIN
AND SHALL NOT BE LIABLE FOR ANY ERRORS. U.S. Government Customers: The data contained in this manual was developed at private expense and is subject
to the applicable limited rights and restricted data rights as set forth in FAR 52.227-14, DFAR 252.227-7014, and DFAR 252.227-7015.
For a complete list of resources go to the following URL: n i.c o m /r/s b r io
Connect to the Host Computer via Ethernet
1. Power on the host computer.
2. Connect the sbRIO-9608 to the host computer using a standard Category 5
(CAT-5) or better shielded, twisted-pair Ethernet cable.
Connect to Power
1. Ensure that your power supply is powered off.
2. Insert the power connector plug into the power connector receptacle of
the sbRIO-9608 until the connector latches into place.
3. Turn on the power supply.
Connect to the Host Computer via USB
1. Power on the host computer.
2. Connect the USB Type-C 2.0 device port of the sbRIO-9608 to the
host computer using a Type-C to Type-A USB cable.
OR
377895A-03 Aug19

sbRIO-9608
Intel Atom E3805
Dual-Core
1.33 GHz Processor
UARTRS-232
NI-DAQmx
Technology
Real-Time
Clock
Temperature
Sensors
Watchdog
4 GB
eMMC Disk
1 GB
DDR3L
RS-232
Console Out
RJ-45TSN Gigabit
Ethernet Port
RJ-45TSN Gigabit
Ethernet Port
USB 2.0 Device
Type-C Connector
XCVR
PHY
PHY
CAN Port
5 V
3.3 V_AUX
SATA 2.0
PCIe x1 Gen 2
USB 2.0
VBAT
USB 3.1 Host
Type-C Connector
Battery Holder
(BR1632)
High-Speed CAN
Xilinx Artix-7 75T
RMC Connector
(240-pin 60x4 Searay)
2.5 V/3.3 V
Power Selector
2.5 V/3.3 V
Power Selector
FPGA_VIO [0-47]
Digital I/O [0-47], SE/LVDS
Digital I/O [48-95], SE/LVDS
FPGA_VIO [48-95]
CAN Port CAN
Controller
9-30 VDC
Input
Power
Selection and
Protection
On-board
Power
Supplies
Configurable per Module
NI-DAQmx
Technology
Xilinx Artix-7 200T
Optional System
Power 9-30 VDC
2x C Series
Module Interface
Power
Connector
LabVIEW FPGA API Data Path
Processor Data Path
NI-DAQmx API Data Path
Power Path
External Connector/Port
sbRIO-9608 Block Diagram
1
3
5
7
9
2
4
6
8
10
NC
V– (GND)
Shield
CAN_H
NC
CAN_L
NC
V– (GND)
NC
Shield
CAN Pinout
1
3
5
7
9
2
4
6
8
10
DCD
TXD
GND
RTS
RI
RXD
DTR
DSR
CTS
Shield
RS-232 (ASRL1) Pinout
1 32 4 5 6
7
1
2
3
4
1. Power LED
2. Status LED
3. User1 LED
4. User FPGA1 LED
1. Power terminal 5. RS-232 serial port with Console Out
2. CAN port 6. RJ-45 Gigabit Ethernet ports
3. USB Type-C 2.0 device port 7. RMC connector
4. USB Type-C 3.1 host port
sbRIO-9608 LEDs
sbRIO-9608 Parts Locator Diagram