National Instruments CP400X User manual

CP400X

GETTING STARTED GUIDE
PXIe-5163
PXIe, 200 MHz, 1 GS/s, 14-bit PXI Oscilloscope
Note Before you begin, install and configure your chassis and controller.
This document explains how to install, configure, and test the PXIe-5163. The PXIe-5163 is a
200 MHz, 1 GS/s oscilloscope.
Documentation for the PXIe-5163 is available from the Start menu by navigating to
NI-SCOPE Documentation in the National Instruments folder.
Contents
Verifying the System Requirements..........................................................................................2
Unpacking the Kit..................................................................................................................... 2
Other Equipment....................................................................................................................... 3
Preparing the Environment....................................................................................................... 4
Installing the Software.............................................................................................................. 4
Installing the PXIe-5163........................................................................................................... 5
PXIe-5163 Front Panel and Pinout .......................................................................................... 7
PXIe-5163 SCB-19 Pinout..............................................................................................10
PXIe-5163 Mini-HDMI Breakout Cable to 6 BNC Pinout.............................................11
Configuring the PXIe-5163 in MAX...................................................................................... 12
PXIe-5163 Self-Calibration.................................................................................................... 12
Running Self-Calibration................................................................................................ 13
First Measurements................................................................................................................. 13
Making a Measurement with InstrumentStudio..............................................................13
Making a Measurement with LabVIEW.........................................................................14
PXIe-5163 Compensating Passive Probes...................................................................... 14
Programming the PXIe-5163.................................................................................................. 16
NI-SCOPE Examples......................................................................................................18
Troubleshooting...................................................................................................................... 19
Why Is the ACCESS LED Off When the Chassis Is On?...............................................19
What Should I Do if the PXIe-5163 Doesn't Appear in MAX?......................................19
What Should I Do if the PXIe-5163 Fails the Self-Test?................................................20
Where To Go Next.................................................................................................................. 21
Worldwide Support and Services............................................................................................ 21

Verifying the System Requirements
To use the NI-SCOPE instrument driver, your system must meet certain requirements.
Refer to the product readme, which is available on the driver software media or online at
ni.com/manuals, for more information about minimum system requirements, recommended
system, and supported application development environments (ADEs).
Unpacking the Kit
Refer to the following figure to identify the contents of the PXIe-5163 kit.
Figure 1. PXIe-5163 Kit Contents
13 4 52
16-BitIF Digitizer
NI PXIe-5163
1. PXIe-5163
2. PXIe-5163 Safety, Environmental, and Regulatory
Information
3. PXIe-5163 Getting Started Guide (this document)
4. Maintain Forced-Air Cooling Note to Users
5. Export Requirements Note to Users
Notice To prevent electrostatic discharge (ESD) from damaging the module,
ground yourself using a grounding strap or by holding a grounded object, such as
your computer chassis.
1. Touch the antistatic package to a metal part of the computer chassis.
2. Remove the module from the package and inspect it for loose components or other signs
of damage.
Notice Never touch the exposed pins of connectors.
Note Do not install a module if it appears damaged in any way.
3. Unpack any other items and documentation from the kit.
Store the module in the antistatic package when the module is not in use.
2| ni.com | PXIe-5163 Getting Started Guide

Other Equipment
There are several required items not included in your device kit that you need to operate the
PXIe-5163. Your application may require additional items not included in your kit to install or
operate your device.
Required Items
• A PXI Express chassis and chassis documentation
• A PXI Controller or PC with a Device for PXI Remote Control system that meets the
system requirements specified in this guide and chassis documentation
Optional Items
• PXI Slot Blocker Kit, 5 slot blockers (NI part number 199198-01)
• PXI Filler Panel Kit, 17 filler panels (NI part number 778646-01)
• BNC-to-BNC cable, 50 Ω, 1 m (NI part number 781887-01)
• AUX 0 connectivity:
– SCB-19 noise rejecting, shielded AUX 0 connector block (NI part number
783959-01)
– SHH19-MH19-AUX shielded single-ended cable, 1 m (NI part number 784091-01)
– Mini-HDMI Breakout Cable to 6 BNC, 6 in. (NI part number 786979-01)
• Oscilloscope probe compensator, SMB (NI part number 786983-01)
• Probes—refer to the following table for several options compatible with the PXIe-5163.
Table 1. Probe Options for the PXIe-5163
Model NI Part Number Description
CP400X 784254-01 400 MHz, 2 m, 10X cable divider probe
CP500X 784253-01 500 MHz, 1.2 m, 10X cable divider probe
NI 5191 781785-01 800 MHz differential active probe
SA1000X 784255-01 1 GHz single-ended active probe
SA1500X 784256-01 1.5 GHz single-ended active probe
SA2500X 784257-01 2.5 GHz single-ended active probe
SP500C 783630-01 100x passive probe, 500 MHz
SP500X 783629-01 10x passive probe, 500 MHz
CC0550X 786846-01 5 A RMS, 50 MHz current probe
CC05120X 786847-01 5 A RMS, 120 MHz current probe
PXIe-5163 Getting Started Guide | © National Instruments | 3

Table 1. Probe Options for the PXIe-5163 (Continued)
Model NI Part Number Description
CC5002X 786848-01 500 A RMS, 2 MHz current probe
CC15010X 786849-01 150 A RMS, 10 MHz current probe
CC3050X 785561-01 30 A RMS, 50 MHz current probe
CC30100X 785562-01 30 A RMS, 100 MHz current probe
Visit ni.com for more information about these additional items.
Preparing the Environment
Ensure that the environment in which you are using the PXIe-5163 meets the following
specifications.
Temperature
Operating 0 °C to 50 °C
Storage -40 °C to 71 °C
Humidity
Operating 10% to 90%, noncondensing
Storage 5% to 95%, noncondensing
Pollution Degree 2
Maximum altitude 4,600 m (570 mbar) (at 25 °C ambient temperature)
Indoor use only.
Installing the Software
You must be an Administrator to install NI software on your computer.
1. Install an ADE, such as LabVIEW or LabWindows™/CVI™.
2. Visit ni.com/downloads/drivers and search for NI-SCOPE.
3. Download the latest version of NI-SCOPE, extract the downloaded files, and run the
executable (.exe) file.
Driver support for the PXIe-5163 was first available in NI-SCOPE 18.7.
4. Follow the instructions in the installation prompts.
Note Windows users may see access and security messages during
installation. Accept the prompts to complete the installation.
4| ni.com | PXIe-5163 Getting Started Guide

5. When the installer completes, select Restart in the dialog box that prompts you to restart,
shut down, or restart later.
Installing the PXIe-5163
Notice To prevent damage to the PXIe-5163 caused by ESD or contamination,
handle the module using the edges or the metal bracket.
1. Ensure the AC power source is connected to the chassis before installing the module.
The AC power cord grounds the chassis and protects it from electrical damage while you
install the module.
2. Power off the chassis.
3. Inspect the slot pins on the chassis backplane for any bends or damage prior to
installation. Do not install a module if the backplane is damaged.
4. Remove the black plastic covers from all the captive screws on the module front panel.
5. Identify a supported slot in the chassis. The following figure shows the symbols that
indicate the slot types.
Figure 2. Chassis Compatibility Symbols
NI PXIe-1062Q
12 3 45
1. PXI Express System Controller Slot
2. PXI Peripheral Slot
3. PXI Express Hybrid Peripheral Slot
4. PXI Express System Timing Slot
5. PXI Express Peripheral Slot
PXIe-5163 modules can be placed in PXI Express peripheral slots, PXI Express hybrid
peripheral slots, or PXI Express system timing slots.
6. Touch any metal part of the chassis to discharge static electricity.
7. Ensure that the ejector handle is in the downward (unlatched) position.
8. Place the module edges into the module guides at the top and bottom of the chassis. Slide
the module into the slot until it is fully inserted.
PXIe-5163 Getting Started Guide | © National Instruments | 5

Figure 3. Module Installation
16-BitIFDigitizer
NIPXIe-5163
NI PXIe-1075
1
3
2
1. Chassis
2. Hardware Module
3. Ejector Handle in Downward (Unlatched) Position
9. Latch the module in place by pulling up on the ejector handle.
10. Secure the module front panel to the chassis using the front-panel mounting screws.
Note Tightening the top and bottom mounting screws increases mechanical
stability and also electrically connects the front panel to the chassis, which can
improve the signal quality and electromagnetic performance.
11. Cover all empty slots using EMC filler panels or fill using slot blockers to maximize
cooling air flow, depending on your application.
12. Power on the chassis.
6| ni.com | PXIe-5163 Getting Started Guide

PXIe-5163 Front Panel and Pinout
Front Panel
PXIe-5163
200 MHz Oscilloscope
ACCESS ACTIVE
CH 0
CAT II TO
50 Ω: 5 V Peak MAX
1 MΩ: 250 V Peak MAX
CH 1
250 V RMS
MAX INPUT:
+5 V MAX
CLK
IN
PFI 0
AUX 0
PXIe-5163 Getting Started Guide | © National Instruments | 7

Table 2. Connectors
Signal Connector Type Description
CH 0 and CH 1 BNC female Analog input connection; digitizes data and triggers
acquisitions.
CLK IN SMB Imports an external reference clock or sample clock to
the oscilloscope.
PFI 0 SMB PFI line for digital trigger input/output, probe
compensation.
AUX 0 MHDMR Reference clock input, reference clock output,
bidirectional digital PFI, and 3.3 V power output.
Table 3. Access LED
Color Indications
Off The module is not yet functional or the module has detected a problem with a power
rail.
Amber The module is being accessed.
Green The module is ready to be programmed.
Table 4. Active LED
Color Indications
Off Module is not armed, triggered, or acquiring a waveform.
Amber The module is armed and waiting for a Reference (Stop) Trigger.
Green The module has received a Reference (Stop) Trigger. Also indicates that the module
is acquiring a waveform.
Red The module has detected an error. The LED remains red until the error condition is
removed. The following scenarios are examples of potential errors:
• Detected an unlocked condition on a previously locked PLL. A PLL that is
unlocked while in reset does not show an error.
• Unable to detect the external sample clock.
• Detected an overheating or overpowering error.
Note Certain driver interactions may cause the Active LED to flash red.
An error condition does not exist unless the Active LED remains red.
8| ni.com | PXIe-5163 Getting Started Guide

AUX 0 Connector Pinout
16
14
12
18
19
17
15
13
10
11
8
6
4
2
1
3
5
7
9
Table 5. AUX 0 Connector Pin Assignments
Pin Signal Signal Description
1 GND Ground reference for signals
2 CLK IN Used to import an external reference clock
3 GND Ground reference for signals
4 GND Ground reference for signals
5 CLK OUT Used to export the reference clock
6 GND Ground reference for signals
7 GND Ground reference for signals
8 AUX 0/PFI 0 Bidirectional PFI line
9 AUX 0/PFI 1 Bidirectional PFI line
10 GND Ground reference for signals
11 AUX 0/PFI 2 Bidirectional PFI line
12 AUX 0/PFI 3 Bidirectional PFI line
13 GND Ground reference for signals
PXIe-5163 Getting Started Guide | © National Instruments | 9