2 3
• Never place heavy or sharp objects on the steamer's power cable.
• All cables should be positioned so they cannot be tripped over or become
obstructions.
• It is recommended to not plug in any other appliances into the same
circuit when the garment steamer is in use to avoid overload.
• If the supplied power cord is damaged, it should be replaced by a
qualified technician.
• Do not expose the steamer to humidity and or use it outdoors.
• Only fill the water tank with tap or distilled water. Other liquids may
damage the steamer.
• Do not put any additives in the water tank.These can damage the steamer.
• Never leave the steamer unattended when it is hot, switched on, or
connected to power.
• Do not use the steamer if it has fallen from a high place, or if there are
visible signs of damage or leakage.
• The garment steamer provides a thermal safety fuse to protect it from
over-heating. However, the steamer should not be left unattended while it
is connected to power.Take care when there are children in the vicinity of
the steamer.
• Never use the steamer on clothes that are being worn. Never direct the
steamer towards people or animals.
• There may be leakage from the steam head if the steamer's temperature
is not high enough to vaporize water and generate steam.Therefore, make
sure the steamer is always preheated for 2-3 minutes before use.
• Always unplug the steamer before attaching or detaching the attachment
brush.
• Only use officially provided attachments and accessories.
Included Items
1 x Garment Steamer
1 x Fabric brush
1 x Lint brush
1 x Crease Clip
1 x Measuring cup
Note: When unpacking the garment steamer, check if you have received all
the items listed.
Operating Instructions
1. Carefully remove the steamer from package, making sure all of the
parts and accessories are free of visible damage. Remove all protective
packaging material from the steamer prior to its first use.
2. Press the Water Tank Release Button, pull out the water tank, open the
rubber water inlet cover, and fill the water tank with tap or distilled
water up to the MAXIMUM level. Always ensure the water tank is at least
one third full.
3. Connect the steamer to a power outlet and switch it on by pressing
the Power Button.The power indicator light will start flashing and
the steamer will begin to heat.When the light stops flashing and
becomes solid, preheating has finished and you can start steaming your
garments.
4. Press the Steam Activation Button to steam a single time. Press and hold
the Steam Activation Button to steam continuously. Or press the Steam
Activation Button and push down the trigger lock for automatic steam
flow.
5. A slight odor might be noticeable during your initial use of the steamer.
This is normal for a new steam appliance and should diminish with use.
6.This garment steamer has a intelligent automatic power-off function. It
will shut off automatically after about 8 minutes of inactivity.
To Steam Garments
1. Place the fabric in a dry and ventilated place and at least 20 cm (8
inches) away from any walls (otherwise moisture may cause mildew).
2. Empty garment pockets and straighten turn-ups such as cuffs and
hems.
3. Hang the garment from a hanger and stretch the fabric slightly with
one hand, making sure there is nothing behind the fabric that could be
damaged by the steam.
4. Put the steam head against the garment, pressing and holding the
Steam Activation Button while moving your arm in an up and down
motion, targeting creases on the fabric.
5.When using the steamer without the fabric brush, keep a distance of at
least 5 cm (2 inches) between the steam head and the garment.
