Nauticam 32211 User manual

Straight Viewfinder 320 / 1:1
Nauticam Full Frame Viewfinders
Introduction 2
2
3
4
5
Package Contents
Important Instructions
Part Names
Installing the Viewfinder
User Manual
Underwater Optics
6
7
Viewfinder Collar Adaptor
Care/Storage
8
9
Warranty
Specification
PN 32211
Dec, 2021

2
INTRODUCTION
PACKAGE CONTENTS
Thank you for purchasing this Nauticam product.
Before using the product, please read this manual thoroughly to familiarize yourself with full scope of functions on the
product as well as ensuring that you will use the product correctly.
After purchase, we suggest that you reuse all packaging materials for future travelling.
Make sure that you have all the included items listed below before using this product.
If some items are missing or damaged, contact your local Nauticam dealer.
Spare O-rings x 3
Straight Viewfinder 320 / 1:1
Neoprene Bag
(with front and rear covers)
Manual Instruction Card

3
IMPORTANT INSTRUCTIONS
Water-tight test of the housing (without
camera inside) along with the viewfinder
before usage is recommended.
Do not expose the housing setup in direct
sunlight for a prolonged period.
Defective products should be shipped to
our distributors for service. Do not attempt
to disassemble and /or modify any part of
the lens.
The housing setup should be positioned
on the a stable and safe surface on land.
This product is not intened for use by children,
or persons with reduced physical, sensory or
mental capabilities, or lack of experience and
knowledge, unless they are supervised and/
or given instruction by a responsible person
concerning use of the product to ensure that
they can use it safely.
Do not use any kind of abrasive solution to
clean the glass surfaces.
Use only Nauticam lubricant on silicone
rubber O-ring. Do not stretch any O-rings
excessively. Only remove it using Nauticam
O-ring remover.
Do not sealed the housing system when
travelling by air.
1
3
5
7
9
11
4
6
8
10
2
Do not open the housing system in wet or
sandy environment. Protect the housing
and lenses from moisture and debris in
order to prevent malfunction or leakage.
Prevent any sand or dust or water
penetration inside the housing and in
between lenses. Be extra careful when
changing lens and inserting or removing
the camera.
Do not jump in water carrying the housing
setup. Always have the setup handed to
you when you are in water.

4
PART NAMES AND FUNCTIONS
Dioptric adjustment knob Retainer O-ring
Sealing O-ring Alignment pins
Eyepiece
1 2
3 4
5
1
4
2
3
5

5
INSTALLING THE VIEWFINDER
1
4
2
5
3
firstly remove the pre-installed 0.66x viewfinder
from the housing by removing the retainer o-ring
inside rear housing
align the viewfinder alignment pins with the LCD
display window and push the viewfinder into the
housing until it cannot go in any further
gently push the 0.66x viewfinder from the inside of
the housing
lightly lubricate the retainer o-ring and place it back
from inside the housing
remove the retainer o-ring from the viewfinder

6
*
drawings as illustrations onl
y
VIEWFINDER COLLAR ADAPTOR
To Use with MIL Housings
1
3
2
remove the four screws from viewfinder body
replace with #32215 Viewfinder collar
adaptor for 32211/2/3/4/ to use with MIL
housings
screw back the four screws onto the
viewfinder body
take out the collar
* if you are experiencing difficulties taking out the collar, please
try this additional procedure
- firstly take away the screw cap cover
- then take out the collar as you screw in one screw into the hole

7
CARE/STORAGE
Soak the housing system along with the
viewfinder in fresh water after salt water
usage
Protect the housing and lenses with
robust and shock-proof travel case
during transportation. Do not travel
with camera inside housing.
Operate all controls and buttons at
least 3 times while immersed in fresh
water
We recommand cleaning and inspecting
the main O-ring each time after diving for
any damage and every time the housing
is opened.
We recommand to ship the housing to our
servic centers for a complete overhual
after 200 dives/every 2 years.
1
3
5
4
2

8
WARRANTY
All NAUTICAM Housing Products and Viewfinders are
warranted against any material and manufacturing
defects for two years from the date of purchase for
consumer use. NAUTICAM Optical Accessories are
warranted against material and manufacturing defects
for a period of one year, and HDMI cables carry a year
warranty.
This warranty only applies to products purchased from
authorized NAUTICAM dealers and does not extend be-
yond the original retail purchaser.
To return your product for service, please contact your
regional authorized service center(s). Please note that
this warranty only applies when the product is pur-
chased in the territory where the service center is lo-
cated.
NAUTICAM accepts no liability for any damage to and
defects in the housing caused by improper use and/or
poor maintenance; it is the responsibility of the own-
er to carefully follow the instructions in our manuals.
NAUTICAM does not hold responsibility for damage, of
any nature, to any equipment used with and/or placed
within our products.
NAUTICAM accepts no liability for any loss of captured
images or the inability to capture images even if it is
due to the malfunctioning of our products.
Unauthorized modifications and/or repairs of our
products will automatically invalidate the warranty.

9
SPECIFICATIONS
Construction
Body
Lens
Hard Anodized Aluminium Alloy
12 Elements in 9 groups with enhanced
multi-layer anti-relective coating
Dimensions
Weight
Depth
Magnification Ratio (compared to camera viewfinder)
Dioptric Adjustment Range
Width
In air
Rating
1 : 1
-3 to +3
Height
Buoyancy in water
Depth
90mm
0.62 kg
150m
75 mm
negative 0.33 kg
110mm
Recommanded Compatibility
All DSLR Housings
Full Frame Mirrorless Housings
Mirrorless Housings via #32215 Viewfinder Collar Adaptor
Canon
Sony
Sony
Olympus
Nikon
Panasonic
Fujifilm
NA-R5
NA-A7C
NA-α2020
NA-EM1III
NA-Z7II
NA-A6400
NA-S1R
NA-XH1
NA-S1H
NA-GH5SV
NA-EOSM50II
Panasonic
Canon
NA-R6
NA-A6600
NA-A7IV
NA-EM10IV
NA-R
NA-A6500
NA-A7RIII
NA-EM1II

Nauticam Internationl Ltd.
Rm 2203, CCT Telecom Bldg,
11 Wo Shing St,
Fo Tan,
Hong Kong
Tel. +852 - 26902711
Fax. +852 - 26909778
URL. www.nauticam.com
Gallery. www.nauticam.smugmug.com