Nauticam Mounting Ball 17958 User manual

Current as of 2022-05-10
Instruction Manual for Mounting
Ball for NA-502/502B/503/ Ninja V/
Ninja V-S/Shinobi/RT4.7/FHD5/058
PN#17958
FOREWORD
Thank you for your purchase of a NAUTICAM product.
At NAUTICAM, we pride ourselves in the ability to recognize the requirements
of professional as well as amateur underwater photographers and fulfill them
through the innovative designs of our products. We strive to achieve a high
level of user-friendliness by allowing stress-free installation and easy operation
of all important functions of the camera.
Please read this manual carefully before using the product, this will maximize
its performance as well as its lifetime.
WARRANTY
All NAUTICAM Products are warranted against any material and
manufacturing defects for two years from the date of purchase for consumer
use. This warranty only applies to products purchased from authorized
NAUTICAM dealers and does not extend beyond the original retail purchaser.
To return your product for service, please contact your regional authorized
service center(s). Please note that this warranty only applies when the product
is purchased in the territory where the service center is located.
NAUTICAM does not hold responsibility for damage, of any nature, to any
equipment used with and/or placed within our products.
NAUTICAM accepts no liability for any loss of captured images or the
inability to capture images even if it is due to the malfunctioning of our
products.
Unauthorized modifications and/or repairs of our products will automatically
invalidate the warranty.
IDENTIFICATION OF PARTS
INSTALL THE MOUNTING BALL TO A HOUSING
Mount the housing mounting ball onto the designated area.
Tighten it with four S.S. screws provided.
To remove the mounting ball, reverse the above steps.
Housing Mounting Ball
M3 Screws (x 4)

Current as of 2022-05-10
SPECIFICATIONS
17958 MOUNTING BALL FOR NA-502/502B/503/ NINJA V/ NINJA V-
S/SHINOBI/RT4.7/FHD5/058
Dimensions(mm):
48.6 x 37.0 x 27.0
Compatible housings:
17906 NA-502H housing for Small HD 502
5-inch HD monitor with HDMI 1.4 input
support
17907 NA-502S housing for Small HD 502
5-inch HD monitor with SDI input support
17920 NA-502B-H Housing for SmallHD
502 Bright Monitor (with HDMI 1.4 input
support)
17921 NA-502B-S Housing for SmallHD
502 Bright Monitor (with 3G-SDI input
support)
17922 Nauticam Atomos Ninja V Housing
for Atomos Ninja V 5” 4Kp60 4:2:2 10-bit
Reorder/Monitor(excl. HDMI 2.0 cable)
17922S Nauticam Atomos Ninja V-S
Housing for Atomos Ninja V 5” 4Kp60 4:2:2
10-bit Reorder/Monitor (excl. HDMI 2.0
cable) with Atomos AtomX SDI Module
17923 NA-Shinobi-H Housing for Atomos
Shinobi 5.2" 4K HDMI Monitor with HDMI
1.4 input
17924 NA-Shinobi-S Housing for Atomos
Shinobi 5.2" 4K HDMI Monitor with SDI
input
17925 NA-503-H Housing for SmallHD 503
UltraBright On-Camera Monitor (With
HDMI 1.4 input)
17925S NA-503-S Housing for SmallHD
503 UltraBright On-Camera Monitor (with
3G-SDI input support)
17903 NA-058 housing for TVLogic VFM-
058W 5.5” Full HD Viewfinder Monitor
with HDMI 1.4 and SDI bulkheads and
cables
17908 NA-FHD5 Housing for Sony CLM-
FHD5 Full HD Monitor
16112 NA-RT4.7 Housing for REDTouch
4.7" LCD Monitor with Monitor Shade
Remark: Nauticam supports only e-manuals. Please download corresponding
product manuals on Nauticam.com website, or contact us for e-manuals.